|
| 1 | BED PLY WOOD TOP (FD-246/ 247) Removing the existing unserviceable/broken long rail and S&F new well seasoned hard wood (teak) long rail complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. |
| 2 | Removing the existing unserviceable./broken complete head board with legs of BED PLY WOOD TOP (FD-246/ 247) and S&F new head board with teak wood legs complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. |
| 3 | Removing the existing unserviceable/broken complete foot board with legs of BED PLY WOOD TOP (FD-246/ 247) and S&F new foot board with teak wood legs complete all as per measurements specified and shown on drawings and as directed by Engg-in-Charge. |
| 4 | Removing the existing unserviceable/broken ply wood top of BED PLY WOOD TOP (FD-246/ 247) and S&F new ply wood top of size 1860mmx860mm BWR GRADE duly ISI marked of Make : Green ply/century Ply/ Kit Ply with fixing in position with suitable size screws & cup washers complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge. |
| 5 | Removing the existing unserviceable./worn out/ broken plywood of head board and foot board on both sides of BED PLY WOOD TOP (FD-246/ 247) and S&F new 4mm thick one side teak face plywood for head board and foot board on both sides complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge. |
| 6 | Removing the existing unserviceable/broken teak wood beading for Head board and Foot board of BED PLY WOOD TOP (FD-246/ 247) and S&F new teak wood beading of 12mm dia half round for head and foot board complete all per measurements specified and shown on drawings and as directed by Engg-in-Charge. |
| 7 | Removing old broken / unserviceable MS bracket of of BED PLY WOOD TOP (FD-246/ 247) and S&F new MS bracket of size150mm x 35mm x 5mm thick \\"L\\"shaped duly treated with black paint complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 8 | M & L Preparation of wood surfaces of BED PLY WOOD TOP (FD-246/ 247) by complete removal of existing treatment using grinding machine including filling of cavities by putty,filler,sealer and applying two coats of french polish to obtain glossy finish complete all as specified and as directed by Enginner-in-charge. Note: Work will be executed at Md Accn at CDM and BSO's Furniture Yard as directed. |
| 9 | SOFA SET 5 SEATER (FD 281/373 ) CUSHION: Removing old broken / unserviceable front legs of sofa single seat (FD 281/373 ) and S&F new Front legs of size 530mmx70mmx35mm all as shown on drg. and as directed . |
| 10 | Removing old broken / unserviceable rear legs of sofa single seat (FD 281/373 ) and S&F new rear legs of size 530mmx70mmx35mm all as shown on drg. and as directed . |
| 11 | Removing old broken / unserviceable arms of sofa single seat (FD 281/373 ) and S&F new arms of size 725mmx35mmx70mm all as shown on drg. and as directed . |
| 12 | All as per item sl No. 2.00 herein before but for sofa set 3 seater (FD 281/373) . |
| 13 | All as per item sl No. 2.01 herein before but for sofa set 3 seater (FD 281/373) . |
| 14 | All as per item sl No. 2.02 herein before but for sofa set 3 seater (FD 281/373 ). |
| 15 | Removing old broken / unserviceable front rail of sofa single seater (FD 281/373 ) and S&F new front rail of size 530mmx35mmx100mm all as shown on drg. and as directed . |
| 16 | Removing old broken / unserviceable front rail of sofa three seater (FD 281/373 ) and S&F new front rail of size 1590mmx35mmx100mm all as shown on drg. and as directed . |
| 17 | Removing old broken / unserviceable wooden frame for back of sofa three seater (FD 281/373 ) and S&F new frame of size 35mmx70mm all as shown on drg. and as directed . |
| 18 | Removing old broken / unserviceable battons of sofa single/three seater (FD 281/373 ) and S&F new battons of size 560mmx20mmx50mm all as shown on drg. and as directed . |
| 19 | Removing old broken / unserviceable PVC shoe of sofa single/three seater (FD 281/373 )and S&F new PVC shoe of best quality all as shown on drg. and as directed . |
| 20 | Removing old broken / unserviceable ply of sofa single seater(FD 281/373 ) and S&F new plywood 8mm thick Make : Green ply/ KIT Ply /century ply of size 560mmx530mm all as shown on drg. and as directed . |
| 21 | Removing old broken / unserviceable ply of sofa three seater (FD 281/373 )and S&F new plywood 8mm thick Make : Green ply/ KIT Ply /century ply of size 560mmx1590mm all as shown on drg. and as directed . |
| 22 | Removal of old existing unsv seat made up of foam cusion with tapestry cover of sofa set 5 seater (FD 281/373 ) and S&F set of 5 seats made up of 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided. |
| 23 | Removal of old existing unsv back made up of foam cusion with tapestry cover of sofa set 5 seater (FD 281/373 )and S&F set of 5 back made up of 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided. |
| 24 | M&L Preparation of old and new surfaces and applying polishing to entire sofa set 5 seater (FD 281/373 ) complete all as specified and shown drawing and as directed. |
| 25 | Sofa single seat with cushion, Ref FD-281/373 M&L for removing old broken / unserviceable front legs of sofa single seat and S&F new Front legs of size 530mmx70mmx35mm all as shown on drg. |
| 26 | Removing old broken / unserviceable rear legs of sofa single seat FD-281/373 and S&F new rear legs of size 530mmx70mmx35mm all as shown on drg. and as directed . |
| 27 | Removing old broken / unserviceable arms of sofa single seat FD-281/373 and S&F new arms of size 725mmx35mmx70mm all as shown on drg. and as directed . |
| 28 | Removing old broken / unserviceable front rail of sofa single seat FD-281/373 and S&F new front rail of size 530mmx35mmx100mm all as shown on drg. and as directed . |
| 29 | Removing old broken / unserviceable wooden frame for back of sofa single seat FD-281/373 and S&F new frame of size 35mmx70mm all as shown on drg. and as directed . |
| 30 | Removing old broken / unserviceable battons of sofa single seat FD-281/373 and S&F new battons of size 560mmx20mmx50mm all as shown on drg. and as directed . |
| 31 | Removing old broken / unserviceable PVC shoe of sofa single seat FD-281/373 and S&F new PVC shoe of best quality all as shown on drg. and as directed . |
| 32 | Removing old broken / unserviceable ply of sofa single seat FD-281/373 and S&F new plywood 8mm thick Make : Green ply/ Archid /century ply of size 560mmx530mm all as shown on drg. and as directed . |
| 33 | Removal of old existing unsv seat made up of foam cusion with tapestry cover of sofa single seat FD-281/373 and S&F seat made up of 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided. |
| 34 | Removal of old existing unsv back made up of foam cusion with tapestry cover of sofa single seat FD-281/373 and S&F back made up of 100mm thick and 40 density PU foam cushion of Make - Kurl-on/ Sleepwell/ Springwell of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Make : D'Decor / Vivid Collection/ Bombay Dying of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided. |
| 35 | M&L Preparing the old and new surfaces and applying polishing to entire sofa single seat FD-281/373 complete all as specified and shown drawing and as directed. |
| 36 | Chair Dining FD-16(M), 279, 228 Removal of old unsv wooden Font Legs of Chair Dining and S&F New seasoned teak wood Legs with exact dimensions complete all as specified,as shown on drgs and directed by Engg-in-Charge. |
| 37 | All as per Item Sl No. 4.00 above for rear Legs of Chair Dining FD-16(M), 279, 228 |
| 38 | All as per Item Sl No. 4.00 above for side rails of Chair Dining FD-16(M), 279, 228 |
| 39 | All as per Item Sl No. 4.00 above for front rails of Chair Dining FD-16(M), 279, 228 |
| 40 | All as per Item Sl No. 4.00 above for back rails of Chair Dining FD-16(M), 279, 228 |
| 41 | All as per Item Sl No. 4.00 above for back rest complete of Chair Dining FD-16(M), 279, 228 |
| 42 | All as per Item Sl No. 4.00 above for bottom stiffner of Chair Dining FD-16(M), 279, 228 |
| 43 | Removing old unsv PVC shoes and S&F New PVC shoes of best quality with 1/2\\" screw to the bottom of legs of Chair Dining FD-16(M), 279, 228.complete all as specified,as shown on drgs and directed by Engg-in-Charge. |
| 44 | Removing Old unserviceable Cane From Chair Dining FD-16(M), 279, 228 and M&L Re-canning with 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Parameter work; complete all as specified,as shown on drgs and directed by Engg-in-Charge. Make: Shah/Premier in white colour |
| 45 | TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 Removing unsv top of TABLE (900mmX600mmX760mm) and Supply & fix new table top of size 900mmx600mm made up of 18mm thick prelaminated particle board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as specified and shown on drawing. |
| 46 | Removing unsv leg of TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 and Supply & fix well seasoned hard wood (teak)leg of size 60mm x 30mm x 760mm long complete all as specified & as shown on drawings |
| 47 | Removing unsv top rail of TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 and Supply and fix well seasoned hard wood (teak) top rail of size 20mm x 60mm x 900mm complete all as specified and as shown on drawings |
| 48 | Removing unsv top rail of TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 and Supply and fix well seasoned hard wood (teak) top rail of size 20mm x 60mm x 600mm complete all as specified and as shown on drawings |
| 49 | Removing broken PVC shoes of TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 and Supply & fix PVC shoes of size 25mm dia of best quality complete. |
| 50 | M&L Preparation of wooden surfaces and applying polishing of 2 coats of french polish to to entire TABLE WITHOUT DRAWER (900mm x 600mm x 760mm) FD-284 complete all as specified and as directed. |
| 51 | TABLE WRITING FD- 275 & 249 Removing old unserviceable top of Table Writing and S&F new Top of size1145mmx600mm made of made up of 18mm thick prelaminated particle board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 52 | TABLE WRITING FD- 275 & 249: Removing old unserviceable Leg and S&F new leg of size 55mmx35mmx760mm of well seasoned teak wood all as specified and shown on drg and directed by Engineer-in-Charge. |
| 53 | TABLE WRITING FD- 275 & 249: Removing old unserviceable Top rail long and S&F new rail of size 25mmx50mmx1145 of well seasoned teak wood complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 54 | TABLE WRITING FD- 275 & 249 : Removing old unserviceable Top rail small and S&F new rail of size 25mmx50mmx600mmof well seasoned teak wood complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 55 | TABLE WRITING FD- 275 & 249: Removing old unserviceable PVC rings of and S&F new PVC rings of 25mm dia of best quality as approved fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 56 | TABLE WRITING FD- 275 & 249: Removing old & u/s sides, back of drawer from and S/F new sides, bottom, back of drawers of existing shape,size made out of 12mm thick plywood BWR Gde ISI marked of Make:kit Ply/ Green Ply/Century Ply. All as specified & shown in drg and directed by Engg-in Charge. |
| 57 | TABLE WRITING FD- 275 & 249 : Removing old & u/s front of drawer from and S&F new front of drawer made out of 18mm thick plywood BWR Gde ISI marked of Make :kit Ply/ Green Ply/Century Ply of existing shape,size. complete all as shown in drg,as specified and directed by Engg-in Charge. |
| 58 | TABLE WRITING FD- 275 & 249 : Removing old & u/s bottom of drawers from and S&F new bottom of drawers of existing shape,size made out of 6mm thick plywood BWR Gde ISI marked of Make:kit Ply/ Green Ply/Century Ply. All as specified & shown in drg and directed by Engg-in Charge. |
| 59 | Removing old unserviceable Stiffner Long of Table Writing and S&F new well seasoned teak wood Stiffner Long of size 25mmx50mmx1145mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 60 | TABLE WRITING FD- 275 & 249: Removing old unserviceable Stiffner small and S&F new well seasoned teak wood Stiffner small of size 600mmx25mmx50mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 61 | TABLE WRITING FD- 275 & 249: Taking down old & u/s door shutter and S&F new door shutters of existing size all as per drg made out of prelaminated particle board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround the shutter of existing shape,size complete all as specified & shown in drg and directed by Engg-in Charge. |
| 62 | TABLE WRITING FD- 275 & 249: Removing old unsv/ broken handle door shutter and drawers of and S/F new stainless steel handle of make: JWL/ ATLANTIC/ AMAR Enterprisesas per sample approved by Engg-in-Charge for shutters and knobs for drawers of make: Himalaya craft/indian shelf/ LAPO as per sample approved by Engg-in-Charge/ GE complete all as specified & shown in drg and directed by Engg-in Charge. |
| 63 | TABLE WRITING FD- 275 & 249: Removing old unsv/ broken hinges shutter of and S/F new piano type continuous hinges of size 20-25mm wide of Make: Generic or equivalent sample as approved by Engg-in-charge for Door shutter complete all as specified & shown in drg and directed by Engg-in Charge. |
| 64 | TABLE WRITING FD- 275 & 249: Removing old unsv/ broken vineer sheet and S&F 4mm thick vineer sheet of approved shade match to the existing size and shape complete all as shown on drg,as specified and directed by Engg-in- Charge. Make of veneer sheet : Century ply/Green Ply/kit Ply. |
| 65 | TABLE WRITING FD- 275 & 249: M&L Preparation of wooden surfaces and applying 02 coats of French polishing of approved shade to entire surface of complete all as specified and directed by Engineer-in-Charge. |
| 66 | TEAPOY FD-232 ,278 & 382: Removing old unserviceable Top of Teapoy and S&F new top complete of size600mmx450mm made of 18mm thick prelaminated particle board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 67 | TEAPOY FD-232 ,278 & 382: Removing old unserviceable top long rail and S&F well seasoned teak wood new long rail of size 20mmx50mmx600mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 68 | TEAPOY FD-232 ,278 & 382: Removing old unserviceable top short rail and S&F well seasoned teak wood new short rail of size 20mmx50mm450mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 69 | TEAPOY FD-232 ,278 & 382 : Removing old unserviceable legs and S&F well seasoned teak wood new leg of size 60mmx30mm540mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 70 | TEAPOY FD-232 ,278 & 382: Removing old unserviceable bottom rail and S&F well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 71 | TEAPOY FD-232 ,278 & 382: Removing old unserviceable PVC rings and S&F new PVC rings of 20mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 72 | TEAPOY FD-232 ,278 & 382 : M&L Preparation of wooden surfaces and applying 2 coats of french polish over to entire surface of of approved shade complete all as specified and directed by Engineer-in-Charge . |
| 73 | PEG TABLE FD-236, 277 & 384 Removing old unserviceable Top of Table Peg and S&F new top complete of size 300mmx450mm made of 18mm thick prelaminated particle board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 74 | Removing old unserviceable top long rail of Table Peg and S&F well seasoned teak wood new long rail of size 20mmx40mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 75 | Removing old unserviceable top short rail of Table Peg and S&F well seasoned teak wood new short rail of size 20mmx40mmx300mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 76 | Removing old unserviceable leg of Table Peg and S&F well seasoned teak wood new leg of size 30mmx50mmx380mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 77 | Removing old unserviceable bottom rail of Table peg and S&F well seasoned teak wood new bottom rail of size 20mmx40mmx300mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 78 | Removing old unserviceable PVC rings of Table Peg and S&F new PVC rings of 20mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 79 | M&L Preparation of wooden surfaces and applying 2 coats of french polish over to entire surface of table peg of approved shade complete all as specified and directed by Engineer-in-Charge . |
| 80 | TABLE DRESSING GENTS (FD-230, FD-379) Removing old unserviceable Drawer of Table Dressing gents and S&F new Drawer complete as per drg of existing size, shape made up of 12mm thick ply wood of Make : kit ply/ Green Ply/ century Ply complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 81 | Removing broken/ unserviceable Looking mirror of Table Dressing Gents and S&F new mirror of size 380mmx760mm, 5 to 5.5mm thick of Make: Modi Guard /swastik/ Saint Gobin complete with teak wood frame duly fixed with clamp for hanging of table dressing gents complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 82 | S&F 4mm vineer sheet of approved shade of existing shape, size to Top, sides, front of drawer of table dressing gents all as directed by Engg-in- Charge. Make of veneer sheet : Century ply/Green Ply/kit Ply. |
| 83 | Removing old unserviceable knobs of drawers of Table Dressing gents and S&F new knobs for drawers of make: Himalaya craft/indian shelf/ LAPO as per sample approved by Engg-in-Charge/ GE complete |
| 84 | M&L Preparation of wooden surfaces and applying polishing two coats to new part and one coat to entire surface table dresing gents complete all as specified and directed by Enginer-in-Charge. |
| 85 | Removing old unserviceable batton of Table Dressing Gents and Supply and fix well seasoned teak wood new batton of size 35mmx25mm complete all as specified and as shown on drawings |
| 86 | Removing old unserviceable wood edging of Table Dressing Gents and Supply and fix new teak wood edging of size 18mmx4mm all alround the front portion dressing table complete all as specified and as shown on drawing. |
| 87 | TABLE DINING 6/8 PERSONS FD-239 & 273 Removing old unserviceable Top of Table Dining 6 Pers and S&F new top complete of size 1500mm(L) x 900mm (W) suitable for table dinging 6 pers shall be made of 18mm thick prelaminated particle board (approved shade by GE) exterior grade, ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished the teakwood edging complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 88 | All as per Item No.10.00 here-in-before but overall size 1800mm(L) x 900 mm (W) for table dining 8 persons complete all as shown on drg |
| 89 | Removing old unserviceable top long rail of Table Dining 6 Pers and S&F well seasoned teak wood new long rail of size 25mmx100mmx1500mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 90 | Removing old unserviceable top long rail of Table Dining 8 Pers and S&F well seasoned teak wood new long rail of size 25mmx100mmx1800mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 91 | Removing old unserviceable top short rail of Table Dining 6/8 Pers and S&F well seasoned teak wood new short rail of size 25mmx100mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 92 | Removing old unserviceable legs of Table Dining 6/8 Pers and S&F well seasoned teak wood new leg of size 75mmx40mmx760mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 93 | Removing old unserviceable wooden brackets of Table Dining 6/8 Pers and S&F new well seasoned teak wood brackets of size 50mmx50mmx25mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 94 | Removing old unserviceable PVC rings of Table Dining 6/8 Pers and S&F new PVC rings of size 25mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 95 | M&L Preparation of wooden surfaces and applying 2 coats of french polish over a coat of wood primer to new part and 02 coat of french polish of approved shade to entire wood surface complete to Table Dining 6/8 Pers complete all as specified and directed by Engineer-in-Charge. |
| 96 | TABLE BED SIDE FD28,FD210, FD248 & FD276: Removing old u/s plywood back of the table bed side & S&F new back of size 510mmx450mm of 6mm thick plywood BWR Gde ISI Marked of of existing shape,size Make:kit Ply/ Green Ply/Century Ply all as specified & shown on drg and directed by Engg-in Charge. |
| 97 | TABLE BED SIDE FD28,FD210, FD248 & FD276: Removing old u/s top of the table bed side & S&F new top of size 450mm x230mm made out of 18mm thick Pelaminated particle board one side teak shade ISI Marked of Make:kit Ply/ Green Ply/Century Ply all as specified & shown on drg and directed by Engg-in Charge. |
| 98 | TABLE BED SIDE FD28,FD210, FD248 & FD276: Removing old u/s sides of the table bed side & S&F new sides of size 510mmx 230mm made out of 18mm thick Pelaminated particle board one side teak shade ISI Marked of Make:Kit Ply/ Green Ply/Century Ply all as specified & shown on drg and directed by Engg-in Charge. |
| 99 | TABLE BED SIDE FD28,FD210, FD248 & FD276: Removing old u/s shelf of the table bed side & S&F new shelf of size 450mm x230mm made out of 12mm thick Pelaminated particle board one side teak shade ISI Marked of Make::Kit Ply Ply/ Green Ply/Century Ply all as specified & shown on drg and directed by Engg-in Charge.. |
| 100 | TABLE BED SIDE FD28,FD210, FD248 & FD276: Removing old u/s beading of the table bed side and S&F new teak wood beading 4mm thick 18mm wide alround the front egdes of table bed side complete all as specified & shown on drg and directed by Engg-in Charge. |
| 101 | TABLE BED SIDE FD28,FD210, FD248 & FD276: M&L Preparation of wooden surfaces and applying 02 coats of French polish of approved shade except Particle board complete all as shown ondrg,as specified and directed by Engg-in-Charge. |
| 102 | Almirah Large Steel FD-1031 Removing the old unserviceable 3 way locking assembly system and S&F new locking assembly system to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. |
| 103 | Almirah Large Steel FD-1031: Removing the old unserviceable lock and S&F new lock 65 mm,6 lever to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. Make Godrej/Harrison/Mortice |
| 104 | Almirah Large Steel FD-1031: Removing the old unserviceable cleat and S&F New cleat of size 40mm x 25mm x1mm thick steel to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. |
| 105 | Amirah Large Steel FD-1031: Removing the old unserviceable handle and S&F new 100 mm long CP Handle to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. Make SOMA/S.CEE |
| 106 | Almirah Large Steel FD-1031: Removing the old unserviceable legs and S&F New legs made of 1mm thick MS sheet of size 485mm long x 100mm highx 100mm wide and to be joined with continuous gas welding to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. |
| 107 | Almirah Large Steel FD-1031: Removing the old unserviceable shelves and S&F New shelves made of 1mm thick MS sheet of size 920mm x485mm to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. |
| 108 | Almirah Large Steel FD-1031: Removing the old unserviceable door shutter and S&F new ldoor shutter made of 1mm thick MS sheet of size 1985mmx460 to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. |
| 109 | M&L Preparation of old painted steel surface of the Almirah Large Steel (Ref Drg FD-1031 and FD/E6/MAP/18 ) including shelves by removing all dents filling with putty and spray painting with 2 coats synthetic enamel paint in dual colour over external & internal surfaces complete, all as specified and directed by Engr-in-Charge. |
| 110 | Almirah Medium Steel FD-1032 Removing the old unserviceable 3 way locking assembly system and S&F new locking assembly system to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. |
| 111 | Almirah Large Steel FD-1032: Removing the old unserviceable lock and S&F new lock 65 mm,6 lever to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. Make Godrej/Harrison/Mortice |
| 112 | Amirah Large Steel FD-1032: Removing the old unserviceable handle and S&F new 100 mm long CP Handle to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. Make SOMA/S.CEE |
| 113 | Almirah Large Steel FD-1032: Removing the old unserviceable legs and S&F New legs must be made of 1mm thick MS sheet of size 440mm long x 100mm highx 100mm wide and to be joined with continuous gas welding to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. |
| 114 | Almirah Large Steel FD-1032: Removing the old unserviceable shelves and S&F New shelves must be made of 1mm thick MS sheet of size 760mm x440mm for almirah med steel made to shape and size to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. |
| 115 | Almirah Large Steel FD-1032: Removing the old unserviceable door shutter and S&F New door shutter made of 1mm thick MS sheet of size 1270mmx380 to match with the existing item all as per Drg complete all as specified and directed by Eng-in-charge. |
| 116 | M&L Preparation of old painted steel surface of the Almirah Medium Steel including shelves by removing all dents filling with putty and spray painting with 2 coat synthetic enamel paint in dual colour over external & internal surfaces of Almirah med steel complete, all as specified and directed by Engr-in-Charge. Ref FD-1032 |
| 117 | TABLE OFFICE OFFICER STEEL (FD-1003 ) Removing the existing unserviceable/broken top of table office officer steel and S&F new table top of 1370x760mm of 18mm thick pre laminated particle board bonded with teak wood edging all round duly polishing to edging complete all as shown on drg, all as specified and as directed. |
| 118 | Removing the existing unserviceable lock of table office officers and S&F new brass lock of with duplicate keys suitable for drawers complete all as specified and as directed. Make: Harrison/ Gogrej/ Link |
| 119 | All as per item sl No14.01 here in before but for cabinate of Table office Officers steel |
| 120 | Removing the existing unserviceable /damaged drawer of table office officer steel and S&F new drawer complete all as per size shown in Drg made out of 18 gauge thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer by machine spray complete all as specified and shown on drg. |
| 121 | M&L Preparing the old steel surfaces of table office officers and applying two coats of synthetic enamel paint by machine spray complete all as specified and directed. |
| 122 | TABLE OFFICE CLERK STEEL (FD-84/1004)Removing the existing unserviceable/broken top of table office clerk steel and S&F new table top of size1200x600mm made up of 18mm thick Prelaminated particle board bonded with teak wood edging all round duly polishing to edging complete all as shown on drg and all specified and as directed. |
| 123 | Removing the existing unserviceable lock of table office clerk and S&F new brass lock of with duplicate keys suitable for drawers complete all as specified and as directed. Make: Harrison/ Gogrej/ Link |
| 124 | Removing the existing unserviceable /damaged drawer of table office clk steel and supply and fix new drawer complete all as per size shown in Drg made out of 18 gauge thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer by machine spray complete all as specified and shown on drg. |
| 125 | M&L Preparing the old steel surfaces of table office clerk and applying two coats of synthetic enamel paint by machine spray complete all as specified and directed. |
| 126 | BOOK CASE STEEL FD1028Removing the existing unserviceable/Broken glass for Shutter and S&F Plain glass 3mm thick of size 280mmx 720mm all as specified and shown on drg. |
| 127 | Removing the existing unserviceable handle and S&F steel handle 100mm long for 'Book Case steel' all as specified and shown on drg. |
| 128 | Removing the existing unserviceable lock and S&F new brass lock with keys in duplicate suitable for shutter of Book case steel complete all as specified and directed |
| 129 | M&L Preparation of entire old painted steel surfaces of ‘Book case steel’ and applying two coats of synthetic enamel paint internally and externally of approved shade as directed by Engg in Charge complete all as specified and as directed. |
| 130 | TABLE CENTRE FD 274, 235 Removing old unserviceable Top of Table Centre and S&F new top of size 900mmx450mm made of 18mm thick prelaminated particle board one side teak face colour as approved shade by GE , ISI marked of Make : Century Ply/ Kit Ply/ Green ply with 18mm x 4mm thick teak wood edging alround duly polished complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 131 | Removing old unserviceable top long rail of Table Centre and S&F well seasoned teak wood new long rail of size 20mmx50mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 132 | Removing old unserviceable top short rail of Table Centre and S&F well seasoned teak wood new short rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 133 | Removing old unserviceable legs of Table Centre and S&F well seasoned teak wood new leg of size 60mmx30mmx400mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 134 | Removing old unserviceable bottom rail of Table centre and S&F well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 135 | Removing old unserviceable stiffner of Table centre and S&F well seasoned teak wood new stiffner of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 136 | Removing old unserviceable PVC rings of Table Centre and S&F new PVC rings of size 20mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge. |
| 137 | Table Centre (FD 274, 235GE (Gol)/TD/46/97): M&L Preparation of wooden surfaces and applying 2 coats of french polish over a coat of wood primer to new part and 02 coat of french polish of approved shade to entire surface complete all as specified and directed by Engineer-in-Charge . |
| 138 | CHARPOY GI NYLON NEWAR / PLY TOP (FD-220)M&L for removal of old broken/ unsv plywood of charpoy GI pipe and supply & fix new 12 mm thick BWR grade ply of size 1980mmx900mm as per IS-303 approved specification of Make: Archid ply/ Century Ply/ Green ply on cleats welded on rails. S&F 02 Nos new Flat iron strip for each charpoy of size 900mmx30mmx5mm thick as per sample approved duly welded to each charpoy on two long rails togather on appropriate position of charpoy with providing new nut & bolts with washer including providing Edges of Ply should be prepared with putty for moisture resistance. New Flat Iron strip shall be painted with synthetic enameled paint in black colour over a coat of red oxided primer. Corners of plywood top should be rounded off properly before fixing on charpoy complete all as specified and shown on drg and directed by Engineer - in -Charge. Ref Drg No. FD-220 |
| 139 | S&F 02 Nos cleats of iron angle of size 25mmx25mmx5mm, 50mm long as per sample approved on each long rails and 02 Nos cleats on each short rails duly running welding on approprite position as directed by Engr-in-Charge including drilling hole in each cleats duly painted with synthetic enameled paint black colour .Ref Drg No. FD-220 |
| 140 | M&L for removal of old broken/unsv GI elbow three way from existing frame of Charpoy GI pipe and supply and fix new elbow GI three way 32mm bore medium grade subject to approval of sample complete ISI marked all specified and shown on drawing and directed by Engg in Charge..Ref Drg No. FD-220 |
| 141 | Removing of broken/ unsv check nuts from existing frame of charpoy GI pipe and S&F new check nuts GI 32mm bore medium grade ISI marked subject to approval of sample complete all specified and shown on drawing and directed by Engg in Charge..Ref Drg No. FD-220 |
| 142 | M & L Preparation of wooden surfaces by complete removal of existing treatment using grinding machine including filling of cavities by putty,filler,sealer and applying two coats of french polish /melamin polish to obtain glossy finish for CHAIR WRITING WOODEN FD-280 complete all as specified and as directed by Enginner-in-charge. |
| 143 | All as per Item No.19 above,but TABLE DRESSING LADIES FD378 |
| 144 | All as per Item No.19 above,but HAT STAND WITH MIRROR FD362 |
| 145 | All as per Item No.19 above,but SIDE BOARD FD372 |
| 146 | All as per Item No.19 above,but TABLE CENTRE FD232 |
| 147 | All as per Item No.19 above,but Chair Dining FD-16(M), 279, 228 |
| 148 | M&L Preparing the old steel surfaces and applying two coats of synthetic enamel paint by machine spray for Charpoy IP hard top FD/MAPII/01 complete all as specified and directed. |
| 149 | All as per Item No.20 above,but Chair Verandah FD/MAPII/06 |
| 150 | All as per Item No.20 above,but Shoe Rack steel FD/E6/MAP/02R |
| 151 | All as per Item No.20 above,but Bed Hard steel FD/E6/MAP/08RNote for BOQ Sr Item No. 1.00 to 20.03 :-The above items shall be executed at different unit locations, MD Accns at CDM including at BSO furniture yard all as directed by Engineer-in-Charge/GE. Please Enable Macros to View BoQ information |
