|
| 1 | Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed. |
| 2 | Demolition of cement concrete (including cutting of reinforcement) of any description and any position not otherwise specifically provided for and removal of debris outside MoD land complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 4 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded or pointed in any mortar complete all as specified and directed. |
| 5 | M&L 15-18 mm thick Udaipur green marble work (table rubbed & polished) as in washbasin platform, steps, jambs, pillars, window cills, cooking platform & similar nature works, machine cut, best quality as per sample, over & including 15 mm thick screeding in CM 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and as directed. |
| 6 | M&L for 25mm thick Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in sub base, floors, pavings to receive floor finishes complete all as specified and directed. |
| 7 | M&L 16-18 mm thick granite stone (of any type) as in steps, jambs, urinal partition, pillars, window cills, counter type platforms & similar nature works, machine cut, (table rubbed and polished) best quality as per sample, in CM 1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 8 | M&L Machine cut kota stone slab 18-20 mm thick as in floor (size not less than 580mm x 580mm), treads, steps etc (Single piece of steps, platform etc) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including M&L 15mm thick screed bed in CM 1:4, complete all as specified and as directed. |
| 9 | M&L for glazed colour ceramic tiles (premium quality) of size 300 X 450 X 6-7 mm, as in vertical surface such as i.e. dado / skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 10 | M&L for non-skid coloured ceramic tiles joint free 7 to 8mm thick (Square/Rectangular) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including over 15 mm thick screed bed or bedding layers in CM (1:6) for laying in floors finishing ,complete all as specified and directed. |
| 11 | M&L for non-skid coloured ceramic tiles joint free 7 to 8mm thick (Square/Rectangular) area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6) for laying in floors finishing, complete all as specified and directed. |
| 12 | M&L for glazed colour ceramic tiles (premium quality) of size 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 13 | Taking down existing cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 14 | M&L for rendering 15mm thick in CM 1: 6 on stone masonary surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for rendering 10mm thick on fair faces concrete surfaces in CM 1:3 and finished even and smooth in ceilings without using extra cement complete all as specified and directed. |
| 16 | M&L for raking out joints/ pointing to to squared rubble masonry, jodhpur type regular course built in CM 1:3 all as specified. |
| 17 | M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified. |
| 18 | M&L for preparing new plastered surfaces of walls and applying two coat of Oil Bound distemper over 2mm thick wall care putty over a coat of alkali resistant primer and complete all as specified and directed. |
| 19 | M&L for preparing new plastered surfaces of ceilings and applying two coat of Oil Bound distemper over 2mm thick wall care putty over a coat of alkali resistant primer and complete all as specified and directed. |
| 20 | M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer, Priming the plastered and other surface with alkali resistant priming paint complete all as specified and as directed. |
| 21 | M&L for applying two coats of distempering with acrylic distemper white or coloured on prepared wall surfaces (putty) or old decorated/plastered surfaces complete all as specified and directed. |
| 22 | Providing & fixing false ceiling at all heights with Semi perforated 12mm thick micro tegular edged GRG (Glass Fibre With fully Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 23 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed. |
| 24 | Taking down Chowkats or frames exceeding 1.5 Sqm each and n exceeding 4.0 Sqm each (Without taking off shutters from the frames) complete all as specified and directed. |
| 25 | Taking down and refixing the shutter of any description in the same opening after easing and adjusting and making the door close properly, area of shutter exc 1 sqm but not exc 2 sqm each complete all as specified and directed. |
| 26 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: (a)-For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(b)- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 27 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 28 | Taking down steel window / ventilator complete all as directed. Please Enable Macros to View BoQ information |
| 29 | Taking down steel window / ventilator complete all as directed. Please Enable Macros to View BoQ information |
