|
| 1 | Supply cost of structural steel and rolled steel materials of Embedded parts consisting of seal beam, guide, track arrangement etc. suitable for vent size of 2000mm x 1500mm and maximum structure height of about 2700mm for 1 no. of gate and 1900mm x 1500mm and maximum structure height of about 2700mm for 1 no. of gate including 5% wastage material complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 2 | Fabrication cost of the above mentioned embedded parts with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables,complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 3 | Supply cost of structural steel and rolled steel materials of vertical gate consisting of skin plate, end vertical girders, horizontal girders, bronze pads, lifting brackets, seal arrangements etc. suitable for vent size of 2000mm x 1500mm for 1 no. of gate and 1900mm x 1500mm for 1 no. of gate complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 4 | Fabrication cost of the above mentioned gate leaf with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables, complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge.. |
| 5 | Supply cost of structural steel and rolled steel materials of Steel Hoist Bridge consisting of pedestal, gear box frame, main beams, cross beams etc. suitable for vent size of 2000mm x 1500mm for 1 no. of gate and 1900mm x 1500mm for 1 no. of gate complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 6 | Fabrication cost of the above mentioned steel hoist bridge with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables, complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 7 | Erection, positioning, aligning, fixing, trial and commissioning including unloading and shifting upto location of all components 1st. Stage and 2nd. Stagge embedded parts, vertical gate leaf, steel hoist bridge assembly, with all accessories including machinery, labour, fixture, cutting, aligning, welding, cleaning, finishing complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 8 | Painting cost of embedded parts including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 micron thick and three coats of final paints of 100 micron each, all inclusive of labour, materials and consumables as per relevant IS code specification complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 9 | Painting cost of gate leaf including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 micron thick and three coats of final paints of 100 micron each, all inclusive of labour, materials and consumables as per relevant IS code specification complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 10 | Painting cost of steel hoist bridge including cleaning, degreasing, handling, cost of paint, applying of one coat primer of 40 micron thick and three coats of final paints of 100 micron each, all inclusive of labour, materials and consumables as per relevant IS code specification with all lead and lift complete in all respects for smooth operation as per specification and direction of engineer-in-charge. |
| 11 | Bolts, Nuts Studs, washers etc. |
| 12 | Bronze pad |
| 13 | Lifting pin dia 50mm & length 150mm - 45C8 of IS : 1570 (PART II) all inclusive of cost of material, machining etc. |
| 14 | Bottom Rubber seal |
| 15 | Ø 32 Side seal |
| 16 | Ø 32 Top seal |
| 17 | Anchor bars |
| 18 | Operating handle |
| 19 | Grease & Gear oil etc. |
| 20 | Stainless steel flat |
| 21 | Ø 80 Screw rod with sq. thread |
| 22 | Worm & wormgear set R4/39/8/8.5-200 mm of IS :3734 inclusive of cast steel worm gear, 55C8 worm & shaft, phosphorous bronze nut suitably square threaded, all including cost of materials, maching etc. |
| 23 | Bronze Bush for Worm shaft, having outer dia 45mm & ID 35mm, collar dia 70mm x 6mm, total length 45mm material LTB - 1 of IS: 318 all inclusive of cost of material, machining etc. |
| 24 | Φ 80mm/Φ45mm - 84mm Long Hub all inclusive of material, machining as required & as specified in drawing. |
| 25 | Single Thrust Ball bearing SKF51220 or Equivalent |
| 26 | Concrete cutting |
| 27 | 2nd. Stage concreting |
| 28 | Construction of coffer dam by sand bag and dismantling after completion of work cost of labour, sand bags etc. |
| 29 | Watch and ward at site for erection and cost of dewatering and vent cleaning |
| 30 | Transportation charges with labour charges for loading and unloading in a 10T truck to about 60kms. Please Enable Macros to View BoQ information |
