Tender For Retro Fitting To Pwss At Velapur, Tal-Mahabaleshwar, Distt-Satara
Tender Value
1.42 Crore
Estimated cost
Bid Submission
14 Jul 2026
1 days left
EMD
1.42 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Satara → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Retro Fitting To Pwss At Velapur, Tal-Mahabaleshwar, Distt-Satara
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 2 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 3 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 4 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 5 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 6 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 7 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 8 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 9 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 10 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 11 | 20-Apr-2026 | 14th Call | Date | 23-Apr-2026 |
| 12 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 13 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 14 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 15 | 16-Apr-2026 | 13th Call | Date | 20-Apr-2026 |
| 16 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 17 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 18 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 19 | 16-Apr-2026 | 13th Call | Date | 20-Apr-2026 |
| 20 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 21 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 22 | 20-Apr-2026 | 14th Call | Date | 23-Apr-2026 |
| 23 | 23-Apr-2026 | 15th Call | Date | 28-Apr-2026 |
| 24 | 16-Apr-2026 | 13th Call | Date | 20-Apr-2026 |
| 25 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 26 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 27 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 28 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 29 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 30 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 31 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 32 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 33 | 28-Apr-2026 | 16th Call | Date | 02-May-2026 |
| 34 | 23-Apr-2026 | 15th Call | Date | 28-Apr-2026 |
| 35 | 20-Apr-2026 | 14th Call | Date | 23-Apr-2026 |
| 36 | 16-Apr-2026 | 13th Call | Date | 20-Apr-2026 |
| 37 | 26-May-2026 | 21st call | Date | 02-Jun-2026 |
| 38 | 28-Apr-2026 | 16th Call | Date | 02-May-2026 |
| 39 | 23-Apr-2026 | 15th Call | Date | 28-Apr-2026 |
| 40 | 20-Apr-2026 | 14th Call | Date | 23-Apr-2026 |
| 41 | 16-Apr-2026 | 13th Call | Date | 20-Apr-2026 |
| 42 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 43 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 44 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 45 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 46 | 12-May-2026 | 19th call | Date | 19-May-2026 |
| 47 | 08-May-2026 | 18th Call | Date | 12-May-2026 |
| 48 | 02-May-2026 | 17th Call | Date | 06-May-2026 |
| 49 | 19-May-2026 | 20th call | Date | 26-May-2026 |
| 50 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 51 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 52 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 53 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 54 | 19-May-2026 | 20th call | Date | 26-May-2026 |
| 55 | 12-May-2026 | 19th call | Date | 19-May-2026 |
| 56 | 08-May-2026 | 18th Call | Date | 12-May-2026 |
| 57 | 02-May-2026 | 17th Call | Date | 06-May-2026 |
| 58 | 28-Apr-2026 | 16th Call | Date | 02-May-2026 |
| 59 | 23-Apr-2026 | 15th Call | Date | 28-Apr-2026 |
| 60 | 20-Apr-2026 | 14th Call | Date | 23-Apr-2026 |
| 61 | 16-Apr-2026 | 13th Call | Date | 20-Apr-2026 |
| 62 | 08-May-2026 | 18th Call | Date | 12-May-2026 |
| 63 | 02-May-2026 | 17th Call | Date | 06-May-2026 |
| 64 | 28-Apr-2026 | 16th Call | Date | 02-May-2026 |
| 65 | 23-Apr-2026 | 15th Call | Date | 28-Apr-2026 |
| 66 | 20-Apr-2026 | 14th Call | Date | 23-Apr-2026 |
| 67 | 16-Apr-2026 | 13th Call | Date | 20-Apr-2026 |
| 68 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 69 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 70 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 71 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 72 | 02-Jun-2026 | 22nd call | Date | 09-Jun-2026 |
| 73 | 26-May-2026 | 21st call | Date | 02-Jun-2026 |
| 74 | 19-May-2026 | 20th call | Date | 26-May-2026 |
| 75 | 12-May-2026 | 19th call | Date | 19-May-2026 |
| 76 | 08-May-2026 | 18th Call | Date | 12-May-2026 |
| 77 | 02-May-2026 | 17th Call | Date | 06-May-2026 |
| 78 | 28-Apr-2026 | 16th Call | Date | 02-May-2026 |
| 79 | 23-Apr-2026 | 15th Call | Date | 28-Apr-2026 |
| 80 | 20-Apr-2026 | 14th Call | Date | 23-Apr-2026 |
| 81 | 16-Apr-2026 | 13th Call | Date | 20-Apr-2026 |
| 82 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 83 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 84 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 85 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 86 | 08-May-2026 | 18th Call | Date | 12-May-2026 |
| 87 | 12-May-2026 | 19th call | Date | 19-May-2026 |
| 88 | 02-May-2026 | 17th Call | Date | 06-May-2026 |
| 89 | 28-Apr-2026 | 16th Call | Date | 02-May-2026 |
| 90 | 23-Apr-2026 | 15th Call | Date | 28-Apr-2026 |
| 91 | 20-Apr-2026 | 14th Call | Date | 23-Apr-2026 |
| 92 | 16-Apr-2026 | 13th Call | Date | 20-Apr-2026 |
| 93 | 11-Apr-2026 | 12th Call | Date | 16-Apr-2026 |
| 94 | 08-Apr-2026 | 11th call | Date | 11-Apr-2026 |
| 95 | 06-Apr-2026 | 10th Call | Date | 08-Apr-2026 |
| 96 | 30-Mar-2026 | 9th call | Date | 04-Apr-2026 |
| 97 | 02-May-2026 | 17th Call | Date | 06-May-2026 |
| 98 | 28-Apr-2026 | 16th Call | Date | 02-May-2026 |
| 99 | 23-Apr-2026 | 15th Call | Date | 28-Apr-2026 |
| 100 | 20-Apr-2026 | 14th Call | Date | 23-Apr-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Subwork no.1:- RECTANGULAR CHAMBER 1.5 M x 1.5 M x 1 M |
| 2 | Item no.1:- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift of 0 to 1.5 M |
| 3 | Item no.2:- Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150 |
| 4 | Item no.3:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) |
| 5 | Item no.4:- Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel |
| 6 | Item no.5:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 7 | Item no.6:- Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-chargeAs above of 90 x 60 cm internal size and depth upto |
| 8 | Subwork no.2:- RECTANGULAR CHAMBER 1.5 M x 1.5 M x 1 MItem no.1:- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift of 0 to 1.5 M |
| 9 | Item no.2:- Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150 |
| 10 | Item no.3:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) |
| 11 | Item no.4:- Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel |
| 12 | Item no.5:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 13 | Item no.6:- Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-chargeAs above of 90 x 60 cm internal size and depth upto |
| 14 | Subwork no.3:- RECTANGULAR CHAMBER 1.5 M x 1.5 M x 1 MItem no.1:- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift of 0 to 1.5 M |
| 15 | Item no.2:- Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150 |
| 16 | Item no.3:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) |
| 17 | Item no.4:- Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel |
| 18 | Item no.5:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 19 | Item no.6:- Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-chargeAs above of 90 x 60 cm internal size and depth upto |
| 20 | Subwork no.4:- RECTANGULAR CHAMBER 1.5 M x 1.5 M x 1 MItem no.1:- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift of 0 to 1.5 M |
| 21 | Item no.2:- Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150 |
| 22 | Item no.3:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) |
| 23 | Item no.4:- Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel |
| 24 | Item no.5:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 25 | Item no.6:- Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-chargeAs above of 90 x 60 cm internal size and depth upto |
| 26 | Subwork no.5:- RECTANGULAR CHAMBER 1.5 M x 1.5 M x 1 MItem no.1:- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift of 0 to 1.5 M |
| 27 | Item no.2:- Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150 |
| 28 | Item no.3:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) |
| 29 | Item no.4:- Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel |
| 30 | Item no.5:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 31 | Item no.6:- Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-chargeAs above of 90 x 60 cm internal size and depth upto |
| 32 | Subwork no.6:- RECTANGULAR CHAMBER 1.5 M x 1.5 M x 1 MItem no.1:- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift of 0 to 1.5 M |
| 33 | Item no.2:- Providing and laying in situ Cement concrete M-15 of trap or granite or quartzite or gneiss metal for foundation and bedding including dewatering, form work, compacting, roughening them if special finish is to be provided, finishing if required and curing etcetera complete. PCC M-150 |
| 34 | Item no.3:-Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements) |
| 35 | Item no.4:- Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel |
| 36 | Item no.5:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 37 | Item no.6:- Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-chargeAs above of 90 x 60 cm internal size and depth upto |
| 38 | Subwork No.7:- Proposed Supply well (6 m ø 15 m depth) Taking trial bore (Core Bore Sampling) by Callyx machine with TCT/NX bits to gather undisturbed strata samples for investigation in all types of strata, soft soil, murum, hard murum with boulders, soft rock, hard rock and quartzite, etc. The item includes all hire and running cost of Callyx machine, conveying all materials to site of work excluding conveyance of callyx machine and back sampling all over burden strata in glass jar and core samples serially numbered at site in a wooden core box, samples to be taken at 1.0 M interval and conveying to the place as directed by Engineer-in-charge. The diameter of bore in overburden shall be 100 mm and of NX size (50 mm) in other strata. The item shall also include M.S. casing pipe of 2.5 mm thick plate in overburden only and shall be 1.0 M above GL with cap over it.a) In overburden (soft soil, murum) |
| 39 | b)In weathered rock with boulders |
| 40 | c)In weathered rock / soft rock |
| 41 | d)In hard rock other than quartzite |
| 42 | Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for head works i.e. intake well, connecting main, jack well, pump house, supply well, etc. for lift as below and lead of 150 M including barricading, guarding and disposing off surplus excavated stuff within a radius of 0.5 km. as directed, etc. complete excluding refilling.Lift 0.00 to 1.50 M |
| 43 | Lift 1.50 to 3.00 M |
| 44 | Lift 3.00 to 4.50 M |
| 45 | Lift 4.50 to 6.00 M |
| 46 | Excavation in general in hard material comprising of soft rock, hard rock, Manjara rock, etc, by blasting / controlled blasting, chiselling as required in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including baricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in-charge, excluding refillingLift 6.00 to 7.50 M |
| 47 | Lift 07.50 to 09.00 M |
| 48 | Lift 09.00 to 10.50 M |
| 49 | Lift 10.50 to 12.00 M |
| 50 | Lift 12.00 to 13.50 M |
| 51 | Lift 13.50 to 15.00 M |
| 52 | Providing and laying in situ following grades of cement concrete of trap / granite / quartzite /gneiss metal for foundation and bedding including dewatering, form work, compaction, curing, finishing etc. complete.a) M-150 |
| 53 | Providing and casting in situ c.c. of trap/ granite/ quartzite/ gnesis metal of approved quality for RCC works as per detailed drawings and designs or as directed including normal dewatering, centering, form work, bally, steel propups, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give asmooth and even surface whereever necessary or roughening if special is to be provided and curing etc. complete ( By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)( Excluding M.S. reinforcements)RCC M-200 for water retaining structurea) For Ring Beam Bottom Ring ( 500 mm x 300 mm ) |
| 54 | a) For Vertical Wall (6 m below GL & 1.5 m above GL )Above 1.5 m from GL |
| 55 | From GL to 5 m |
| 56 | From 5m to 6m |
| 57 | Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, bindingwith wires or tack welding and supporting as required, etc. complete. (including cost of binding wire)Lift 0 to 1.5 m above GL |
| 58 | Lift 0 to 5 m below GL |
| 59 | Lift 5 to 7.5 m below GL |
| 60 | Providing stuctural steel work in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc. complete. |
| 61 | Providing and fixing M.S. chequerred plate flooring of following thickness supported on M.S.angles (25x 25x 5 mm size) including welding,cutting and fabricating the plates to the required square or rounding shape,making holes in the plate, includingproviding and applying 3 coats of anticorrosive paint,etc.complete as directed by Engineer-in-charge.6 mm thick |
| 62 | Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved welding,anchoring and applying 3 coats of anticorrosive paint, etc. complete asdirected by Engineer-in-charge |
| 63 | Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thickM.S.angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal andpainting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shadeincluding cost of all labour, transporting bends to curved shape, etc.complete. |
| 64 | Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.7.5 BHP pumps daily 8 hrs for 30 days |
| 65 | Providing and fixing in position C.I. dapuri steps for 22 mm dia. M.S. step with proper anchorage, etc. and providing and applying 3 coats of ant-corrosive paint, etc complete as directed by Engineer-incharge |
| 66 | Providing, and fixing 80 mm dia A.C. / P.V.C. pipe weep holes at 1.5 m.c/c staggered including cost of all materials and labour involved with all leads and lifts.etc.complete with all leads and lifts |
| 67 | Refilling the trenches with available excavated stuff with soft material first over pipe line and then hard material in 15 cm layers with all consolidation, surcharging etc. complete. |
| 68 | Horizontal borewell 30 m each |
| 69 | Carrying out recuperation/ yield test for asserting the discharge of constructed well/ excavated profile as directed by Engineer-incharge. The test is carried out by drawing down water from the well/profile below normal/ subsoil water level upto full depth rise in water level is recorded. The normal water level/ subsoil water level in the well/ profile as well as stainer/ suction level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, overhead, labourers, etc. completed as directed. |
| 70 | Subwork No.8:-Pumping Machinary For Pr.well 5 BHP, Discharge = 2938 LPH, Head = 137 m Providing, erecting and giving tests of submersible pump set confirming to IS 8034 and motor confirming to IS 9283, with water proof winding and discharge with stainless steel shaft. Mortar suitable for working on 415 V = 10% 3 phase 50 Hz A.C. supply with cable guard, thrush carbon/fible bearing to withstand entire hydraulic thrust with suitable suction strainer. Pump should have suitable discharge outlet as per manufacture's design. Antithrust streamlined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) upto 8 stagesProvide duplicate set of submersible pump capable of discharging 2938 litres/hour against a total head 137 M be driven by 5 B.H.P electrical motor directly coupled to it . One pump will be in operation and one pump will be standby. |
| 71 | Supplying and erecting Cupboard type panel board. |
| 72 | Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 73 | Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.50 mm dia (Medium) on well |
| 74 | Providing, supplying and fixing ISI mark CI D/F Reflux valve (non-return valves of following dia including all taxes (central and local), railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental store/site, unloading, stacking etc. complete. Reflux valves as per I.S. 5312 part I (1984)a) Without bypass arrangement - PN - 150 mm dia |
| 75 | Providing and fixing double flanged sluice valve confirming for IS-2096/14846 including worn gear arrangements as per test pressure stainles steel spindle, caps including all taxes transportation etc complete.a) Sluice valve - PN - 1 (Without bypass)50 mm dia |
| 76 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)a) Sluice valve - PN - 1 (Without bypass)50 mm dia |
| 77 | Providing and erecting pressure gauge of required capacity complete with syphon tube, isolating cock suitable for 12mm dia GI pipe. Pressure gauge shall be installed as directed, with tapping on rising main pressure gauge (100 mm dia) |
| 78 | Providing pipe type earthing with 40mm dia G.I Pipe or 20 mm dia G.I Rod complete with all materials as per specifications no EA-EPPlate type Electrode (IS 3043)1. For panel board - 1No. |
| 79 | Supplying and erecting 'b' class GI bend in position with necessary material.50 mm dia |
| 80 | Supplying and erecting 'b' class GI Tee in position with necessary material.50 mm dia |
| 81 | Subwork No.9:-Pressure Filter Item No. 1 - Designing, Providing, supplying, and commissioning of Zeosorb sand media German nanometric pressure filter of flow rate - 30 CuM/Hr, vessel size - 4' x 3' and Activated carbon filter German make media for flow rate 10 Cu.M./Hr , vessel size - 4' x 3' including transportation, freight charges, inspection charges loading, unloading, conveyance to the site of work and errecting the same in closed shed provided by owner/ VP duly protected from sunrays and rains. Media life should be minium 3 (Three) years and Plant warranty should be 12 months against any manufacturing defects. |
| 82 | Subwork No.10:-Pressure Filter Item No. 1 - Designing, Providing, supplying, and commissioning of Zeosorb sand media German nanometric pressure filter of flow rate - 30 CuM/Hr, vessel size - 4' x 3' and Activated carbon filter German make media for flow rate 10 Cu.M./Hr , vessel size - 4' x 3' including transportation, freight charges, inspection charges loading, unloading, conveyance to the site of work and errecting the same in closed shed provided by owner/ VP duly protected from sunrays and rains. Media life should be minium 3 (Three) years and Plant warranty should be 12 months against any manufacturing defects. |
| 83 | Sunwork No.11:- Rising Main Total Length = 1600 m 90 mm HDPE 12.5 KG From Pr.Well to Ex.MT Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointingmaterial like mechanical connector i. e. thread /insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.90 mm HDPE 12.5 KG |
| 84 | Providing & Supply of Electro Fusion Fittingsin accordance with BS EN12201: Part-3 suitablefor drinking water with in black/ blue colourmanufactured from compounded PE80/ PE100virgin polymer and compatible with PE80/PE100pipes, in pressure rating SDR11 with min PN12.5rated for water application and shall be inclusive ofall cost such as testing, inspection charges,transportation up to store, transit insurance,loading, unloading, stacking excluding GST leviedby GOI & GOM in all respect, etc. complete.Couplers 90 |
| 85 | Equal Tee 90 |
| 86 | LNPE 90 Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint |
| 87 | Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.Medium Pipe80 ø |
| 88 | Providing and supplying ISl mark CI D/F reflux valves (non-return valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete.Reflux valves as per I.S.5312 Part I (1984)Without by pass arrangement - PN -180 ø |
| 89 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOt & GOM in all respect etc. completeWithout by pass arrangement - PN -1 Scour Valve80 ø |
| 90 | Providing and supplying Air Valves as per IS-10845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloding, transportatoin upto departmental stores / site, etc. complete. Air Valve Single Ball Flanged Type - PN -125 ø |
| 91 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 |
| 92 | Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd_x0002_A-2/259)Lift 0 to 1.5 |
| 93 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in_x0002_charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259)Lift 0 to 1.5 |
| 94 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Lift 0 to 1.5 |
| 95 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)from excavated stuff |
| 96 | Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including allspecials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II90 mm HDPE 12.5 KG |
| 97 | Hydraulic testing of H. D. P. E./ M. D. P. E.pipe line to specified pressure including cost ofall materials and labour and water for testing forspecified length including cutting, placing endcap making arrangement for filling safe waterusing reciprocating type pumps which should beable to provide specified test pressure gaugesand other necessary equipments, labour,operation charges, etc. required for testing. Therate under this item shall also include cost ofretesting, if necessary and reinstating to originalposition..Working pressure 6 kg/cm290 mm HDPE 12.5 KG |
| 98 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.Medium Pipe80 ø |
| 99 | Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.Medium Pipe80 ø |
| 100 | Lowering, laying, jointing in position following CI/DF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves )80 øADD 10% FOR HILLY REGION |
| 101 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.)upto 150mm |
| 102 | Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:2:4 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.As above of 60x45cm internal size and depth upto 0.9 m with precast R.C.C slab and cover. |
| 103 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)For encasing and reconstruction of road |
| 104 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.Net Volume of Refilling |
| 105 | Subwork No.12:- Gravity Main Total Length = 1500 m 63 mm HDPE 6KG Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointingmaterial like mechanical connector i. e. thread /insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.63 mm HDPE 6KG |
| 106 | Providing & Supply of Electro Fusion Fittingsin accordance with BS EN12201: Part-3 suitablefor drinking water with in black/ blue colourmanufactured from compounded PE80/ PE100virgin polymer and compatible with PE80/PE100pipes, in pressure rating SDR11 with min PN12.5rated for water application and shall be inclusive ofall cost such as testing, inspection charges,transportation up to store, transit insurance,loading, unloading, stacking excluding GST leviedby GOI & GOM in all respect, etc. complete.Couplers 63 |
| 107 | Equal Tee 63 |
| 108 | LNPE 63 Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint |
| 109 | Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.Medium Pipe50 ø |
| 110 | Providing and supplying ISl mark CI D/F reflux valves (non-return valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete.Reflux valves as per I.S.5312 Part I (1984)50 ø |
| 111 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOt & GOM in all respect etc. complete50 ø |
| 112 | Providing and supplying Air Valves as per IS-10845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloding, transportatoin upto departmental stores / site, etc. complete.20 ø |
| 113 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 |
| 114 | Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd_x0002_A-2/259)Lift 0 to 1.5 |
| 115 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in_x0002_charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259)Lift 0 to 1.5 |
| 116 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Lift 0 to 1.5 |
| 117 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)from excavated stuff |
| 118 | Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including allspecials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II63 mm HDPE 6KG |
| 119 | Hydraulic testing of H. D. P. E./ M. D. P. E.pipe line to specified pressure including cost ofall materials and labour and water for testing forspecified length including cutting, placing endcap making arrangement for filling safe waterusing reciprocating type pumps which should beable to provide specified test pressure gaugesand other necessary equipments, labour,operation charges, etc. required for testing. Therate under this item shall also include cost ofretesting, if necessary and reinstating to originalposition..63 mm HDPE 6KG |
| 120 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.Medium Pipe50 ø |
| 121 | Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.Medium Pipe50 ø |
| 122 | Lowering, laying, jointing in position following CI/DF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves )50 ø |
| 123 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.)upto 150mm |
| 124 | Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:2:4 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.As above of 60x45cm internal size and depth upto 0.9 m with precast R.C.C slab and cover. |
| 125 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)For encasing and reconstruction of road |
| 126 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 127 | Subwork No.13:-Gravity Main L = 1200 40 MM GI & L = 600, 63 mm HDPE 6 KG From Spring to MT Dismantling dead pipeline of M.S./ R.C.C./ C.I./ P.S.C. and G.I./ A.C./ P.V.C./ S.W./ H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete40mm |
| 128 | Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.Medium Pipe40mm |
| 129 | Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointingmaterial like mechanical connector i. e. thread /insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.63 mm HDPE 6 KG |
| 130 | Providing & Supply of Electro Fusion Fittingsin accordance with BS EN12201: Part-3 suitablefor drinking water with in black/ blue colourmanufactured from compounded PE80/ PE100virgin polymer and compatible with PE80/PE100pipes, in pressure rating SDR11 with min PN12.5rated for water application and shall be inclusive ofall cost such as testing, inspection charges,transportation up to store, transit insurance,loading, unloading, stacking excluding GST leviedby GOI & GOM in all respect, etc. complete.Couplers 63 |
| 131 | Equal Tee 63 |
| 132 | Reducer 63 X 40 |
| 133 | LNPE 63 Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint |
| 134 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOt & GOM in all respect etc. completeWithout by pass arrangement - PN -1 Scour Valve50 ø |
| 135 | Providing and supplying Air Valves as per IS-10845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloding, transportatoin upto departmental stores / site, etc. complete. Air Valve Single Ball Flanged Type - PN -115 ø |
| 136 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 |
| 137 | Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd_x0002_A-2/259)Lift 0 to 1.5 |
| 138 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in_x0002_charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259)Lift 0 to 1.5 |
| 139 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Lift 0 to 1.5 |
| 140 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263)from excavated stuff |
| 141 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.Medium Pipe40mm |
| 142 | Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.Medium Pipe40mm |
| 143 | Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part IIWorking Pressure 6 kg/cm²63 ø |
| 144 | Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position...63 ø |
| 145 | Lowering, laying, jointing in position following CI/DF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves )50 ø |
| 146 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.)upto 150mm |
| 147 | Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:2:4 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.As above of 60x45cm internal size and depth upto 0.9 m with precast R.C.C slab and cover. |
| 148 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)For encasing and reconstruction of road |
| 149 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 150 | Subwork no.14:- Metallic Tank Foundation For Metallic TankItem NO-1 Excavation for foundation /Pipe trenches in soil/Hard Murum/Soft Rock/ Hard Rock including removing the excavated materials upto a distance of 50 M and lift 1.50 m stacking and spreading as directed by Engineer in charge normal dewatering shoring and strutting preparing the bed for the foundation and excluding back filling etc.MJP SSR 2023-24 ITEM NO- 1to3 PAGE NO-42 + 10%A) Soil |
| 151 | B) Hard Murrum |
| 152 | C) Soft Rock |
| 153 | For Approach RoadA) Soil |
| 154 | B) Hard Murrum |
| 155 | C) Soft Rock |
| 156 | Item NO-2 Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) |
| 157 | Item No-3 Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundationlike raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) M-250 |
| 158 | Item No-4 Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete(including cost of binding wire). Tor Steel |
| 159 | Patable Water Tank Item No-1 Supply and installation of prefabricated ground water storage bolted tanks, acomplete package in knock down, ready to assemble construction consisting of outer wall surface made out of special grade hot dip aluminum Zincalloy, metalic factory coated steel confirming toIS-15961 2012, minimum thickness of 0.6 mm. The inner surface should be provided withliners of minimum 0.6 mm thickness of reinforce polyethylene or polye propelene or metallocene material suitable for drinking water purpose. etc. complete. |
| 160 | A) For the dome type GI corrougated roof structur ewith hot dip galvanized trusses with GI manhole for access for cleaning and maintenance, 10% extra shall be added. |
| 161 | B) In case rain water harvesting filters & system to catch the rain from the GI tank roofs mounted on the tank roof and supplied with the tank then 10% extra shall be added. |
| 162 | C) Hilly region |
| 163 | Compound For Metalic Water Tank :ITEM NO.1- Providing and erecting chain link fencing 1.6M. height with G.I. chain link of size 50 x 50 mm 8 gauge thick and fixed 75 mm above Ground level vertical M.S Angle of 40 x 40 x 6 mm size embedded in C.C. block of 1:4:8 mix of size 450X 450 x 670 mm. at 1.75 M.cc with iron bar 16 mm dia. as bold fast including welding link with angle frame at 30 cm c/c nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. lat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm Angles both sides at every corner or bends embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 nm including 3 coats of oil painting etc. complete. Spec. No.: As directed by Engineer in charge. |
| 164 | ITEM NO.2- Providing and fixing MS Gate 2.5 m wide for compound with 40mm dia. GI pipe approved grill work RCCM150, side piller of 25cmx40cmx2.5m height, foundation, finishing, painting etc complete. |
| 165 | ITEM NO.3- Providing and fixing Wicket Gate 1.0rn wide for compound with 40inim dia. GI pipe approved grill work RCC M150, side piller of 25cmx40cmx2.5mm height, foundation, finishing, painting etc complete. |
| 166 | ITEM NO.4- Online Chlorination unit -1 unit-2500000lit water chlorination capacity of single cartridge at 1ppm dosing price includes transportation upto site with installation. |
| 167 | Annual maintenance & operation of non electric online automatic chlorination fitted online on water supply scheme as mentioned in above item. |
| 168 | Sub Work No.15 :-GSR 10000 LITRES @ Ghorpad Wasti Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bypass arrangement consisting of C.I. M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to all exposed surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. Anti-termite treatment shall be given for underground portion of the structure.RCC GSR Capacity |
| 169 | Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.Inlet 80 mm dia.GI.D./F pipes (Medium) |
| 170 | Outlet80 mm dia.GI.D./F pipes (Medium) |
| 171 | Washout 80 mm dia.GI.D./F pipes (Medium) |
| 172 | Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R,complete with cast iron follower gland and M\\" S. nut holts eoated or other'wise protected from rusting and suitable for D.l.pipes including cost of labour, materials, and transpoffation to stores, loading and unloading excluding GST levied by GOI & GOM in allrespect etc. complete as per IS-9523.80 mm to 300 mm dia |
| 173 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOt & GOM in all respect etc. completeSluice valves PN-1 without bye-pass arrangement80 mm dia. Sluice valve - Outlet/Distribution |
| 174 | 80 mm dia. Sluice valve - Inlet/Bypass |
| 175 | 80 mm dia. Sluice valve - Washout |
| 176 | Sub Work No.16 :-RCC GSR 10000 LITRES @ Ghorpad Wasti Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bypass arrangement consisting of C.I. M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to all exposed surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. Anti-termite treatment shall be given for underground portion of the structure.RCC GSR Capacity |
| 177 | Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.Inlet 80 mm dia.GI.D./F pipes (Medium) |
| 178 | Outlet80 mm dia.GI.D./F pipes (Medium) |
| 179 | Washout 80 mm dia.GI.D./F pipes (Medium) |
| 180 | Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R,complete with cast iron follower gland and M\\" S. nut holts eoated or other'wise protected from rusting and suitable for D.l.pipes including cost of labour, materials, and transpoffation to stores, loading and unloading excluding GST levied by GOI & GOM in allrespect etc. complete as per IS-9523.80 mm to 300 mm dia |
| 181 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOt & GOM in all respect etc. completeSluice valves PN-1 without bye-pass arrangement80 mm dia. Sluice valve - Outlet/Distribution |
| 182 | 80 mm dia. Sluice valve - Inlet/Bypass |
| 183 | 80 mm dia. Sluice valve - Washout |
| 184 | Subwork No.17 :- Distribution System Total Length = 5394 m 63 ø mm to 75 ømm HDPE PN6 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.63 ø |
| 185 | Providing & Supply of Electro Fusion Fittingsin accordance with BS EN12201: Part-3 suitablefor drinking water with in black/ blue colourmanufactured from compounded PE80/ PE100virgin polymer and compatible with PE80/PE100pipes, in pressure rating SDR11 with min PN12.5rated for water application and shall be inclusive ofall cost such as testing, inspection charges,transportation up to store, transit insurance,loading, unloading, stacking excluding GST leviedby GOI & GOM in all respect, etc. complete.Couplers 63 |
| 186 | Couplers 75 |
| 187 | Equal Tee 63 |
| 188 | Equal Tee 75 |
| 189 | LNPE 63 Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint |
| 190 | LNPE 75 Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint |
| 191 | Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.Medium Pipe50 ø |
| 192 | Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOt & GOM in all respect etc. complete.Without by pass arrangement - PN-1.50 ø |
| 193 | LABOURExcavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 |
| 194 | Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 |
| 195 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in_x0002_charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259)Lift 0 to 1.5 |
| 196 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)Lift 0 to 1.5 |
| 197 | Filling in plinth and floors murum bedding intrenches with approved murum fromexcavated materials from foundation in 15cm to 20 cm layers including watering andcompaction, etc. complete. (Bd-A-10/263)from excavated stuff |
| 198 | Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including allspecials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part IIWorking Pressure 6 kg/cm²63 ø |
| 199 | Hydraulic testing of H. D. P. E./ M. D. P. E.pipe line to specified pressure including cost ofall materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position...63 ø |
| 200 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.Medium Pipe50 ø |
| 201 | Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.Medium Pipe50 ø |
| 202 | Lowering, laying, jointing in position following CI/DF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves )50 ø |
| 203 | Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete100 mm x 225 mm (20 kg) |
| 204 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)For Road Reconstruction PCC M150 |
| 205 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.Net volume of refilling |
| 206 | Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.)50 mm |
| 207 | 65 mm |
| 208 | Subwork no.18:- INFORMATORY SIGN BOARDS, TRIAL RUN AND CHLORINATION Commisioning running and maintaining the scheme to quantities, rate capacity, including manning necessory personnel such as operator, valveman, etc, as pr requirements of the scheme and who should also administer chemical dose for a period of one month for individual scheme together with training of personnel spared by MJP/ Local Body and handling over the scheme to Local Body after completion of the above period as directed by Engineer - in charge.For single village |
| 209 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge with two coats of greystove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete. |
| 210 | Subwork.19:-FUNCTIONAL HOUSEHOLD TAP CONNECTION (FHTC) Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour , UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mm respective Dia Heavy duty Brass/Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by Engineer inA) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul) for HDPE & PVC pipeFor MDPE/UPVC Pipe Service Connection on Disribution main.(Without Road Crossing)For 15 mm Service connection |
| 211 | For MDPE/UPVC Pipe Service Connection on Disribution main.(With Road Crossing)For 15 mm Service connection Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-6 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-7 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-8 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-9 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-10 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2026
18:00 IST
Corrigendum-11 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-12 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-13 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-14 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 20, 2026
18:00 IST
Corrigendum-15 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-16 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-17 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-18 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 20, 2026
18:00 IST
Corrigendum-19 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-20 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-21 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2026
18:00 IST
Corrigendum-22 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 28, 2026
18:00 IST
Corrigendum-23 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 20, 2026
18:00 IST
Corrigendum-24 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-25 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-26 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-27 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-28 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-29 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-30 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-31 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-32 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 02, 2026
18:00 IST
Corrigendum-33 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 28, 2026
18:00 IST
Corrigendum-34 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2026
18:00 IST
Corrigendum-35 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 20, 2026
18:00 IST
Corrigendum-36 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 02, 2026
18:00 IST
Corrigendum-37 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 02, 2026
18:00 IST
Corrigendum-38 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 28, 2026
18:00 IST
Corrigendum-39 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2026
18:00 IST
Corrigendum-40 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 20, 2026
18:00 IST
Corrigendum-41 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-42 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-43 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-44 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-45 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 19, 2026
18:00 IST
Corrigendum-46 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 12, 2026
18:00 IST
Corrigendum-47 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 06, 2026
18:00 IST
Corrigendum-48 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 26, 2026
18:00 IST
Corrigendum-49 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-50 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-51 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-52 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-53 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 26, 2026
18:00 IST
Corrigendum-54 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 19, 2026
18:00 IST
Corrigendum-55 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 12, 2026
18:00 IST
Corrigendum-56 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 06, 2026
18:00 IST
Corrigendum-57 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 02, 2026
18:00 IST
Corrigendum-58 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 28, 2026
18:00 IST
Corrigendum-59 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2026
18:00 IST
Corrigendum-60 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 20, 2026
18:00 IST
Corrigendum-61 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 12, 2026
18:00 IST
Corrigendum-62 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 06, 2026
18:00 IST
Corrigendum-63 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 02, 2026
18:00 IST
Corrigendum-64 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 28, 2026
18:00 IST
Corrigendum-65 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2026
18:00 IST
Corrigendum-66 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 20, 2026
18:00 IST
Corrigendum-67 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-68 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-69 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-70 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-71 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 09, 2026
18:00 IST
Corrigendum-72 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 02, 2026
18:00 IST
Corrigendum-73 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 26, 2026
18:00 IST
Corrigendum-74 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 19, 2026
18:00 IST
Corrigendum-75 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 12, 2026
18:00 IST
Corrigendum-76 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 06, 2026
18:00 IST
Corrigendum-77 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 02, 2026
18:00 IST
Corrigendum-78 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 28, 2026
18:00 IST
Corrigendum-79 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2026
18:00 IST
Corrigendum-80 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 20, 2026
18:00 IST
Corrigendum-81 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-82 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-83 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-84 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-85 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 12, 2026
18:00 IST
Corrigendum-86 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 19, 2026
18:00 IST
Corrigendum-87 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 06, 2026
18:00 IST
Corrigendum-88 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 02, 2026
18:00 IST
Corrigendum-89 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 28, 2026
18:00 IST
Corrigendum-90 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2026
18:00 IST
Corrigendum-91 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 20, 2026
18:00 IST
Corrigendum-92 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 16, 2026
18:00 IST
Corrigendum-93 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 11, 2026
18:00 IST
Corrigendum-94 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 08, 2026
18:00 IST
Corrigendum-95 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 04, 2026
18:00 IST
Corrigendum-96 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 06, 2026
18:00 IST
Corrigendum-97 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 02, 2026
18:00 IST
Corrigendum-98 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 28, 2026
18:00 IST
Corrigendum-99 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 23, 2026
18:00 IST
Corrigendum-100 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender