|
| 1 | Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift up to1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 |
| 2 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 3 | Brick masonry work in cement mortar (1:4) in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 1204 |
| 4 | Supplying, fitting and placing with MS bar reinforcement (Fe 415) in substructrue complete as per drawings and technicalspecification Clauses 1002, 1005, 1010 & 1202 including bending for proper and necessary completion of the work and including supply of steel and wastages, bends, hooks and authorised overlapping shall be measurised as per direction of Engineer-in-charge. |
| 5 | Plain/reinforced cement concrete (Grade M20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | R.C.C. Work with cement, approved coarse sand & 2 cm (3/4\\") guage approved stone ballast in proportions of 1:1.5:3 in haviear beam excluding supply of reinforcement and its bending. But including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work Excluding cost of binding wire. si no. 286 |
| 8 | M 150 (1:4) Brick Work ,coarse sand in superstructure including supply of all materials labour T&p etc.required for proper completion of the work . s.i no 305a+309+310 |
| 9 | 12 mm thick plaster (1:4) with cement & Fine sand minimum thickness n-ot to be less than 1 cm including supply of all material labour T&P etc. required for proper completion of the work s.i no 584 new item |
| 10 | Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. |
| 11 | Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. requied for proper completion of the work.661+662 |
| 12 | Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesal or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-109. |
| 13 | Providing and fixing 1mm thick M.S. Sheet garge door with frame of 40x40x6mm (1½\\"x12\\"x\\") angle iron 3.15 mm (1/8\\") thick M.S. gusset plate at the junction and comers including supply and fixing of necessary fittings. Lock rail of 15\\" length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. SI NO. 517 |
| 14 | M.S. or iron of heavy sizes such as trusses, built up gates, record racks, roof work, gates etc. includingriviting of welding where necessary . required for proper completion of the work. Si no 503 |
| 15 | E/W in cutting or in embankment in ordinary soil excavation to be in the from of regular pits not be exceeding 0.50 m in depth and earth work in embankment to be in 20 cm. Layers including ramming and dressing the surface to required levels and slop and also including 1.5 m. lift and up to 15 km .SI NO. 253A+261B+231B |
| 16 | P.C.C.(1:2:4) cement concrete with 20 mm gauge approved stone ballast including supply of all material, labour and t&p etc. s.i no 279 (a) |
| 17 | Supply and fixing of kota stone in flooring 20mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 18 | S/F Fan box |
| 19 | S/F Fan |
| 20 | Wiring point for light/fan with 1sq.mm FRLSH insulateD multistrand single core copper conductor in PVC conduit etc all complete. S.I.NO. 121(B) |
| 21 | Wiring point for plug with 1sq.mm FRLSH insulateD multistrand single core copper conductor in PVC conduit etc all complete. S.I.NO. 124C |
| 22 | S/F of 0.5 to 5Amp single pole miniature circuit breaker (10KA) C curve etc all complete. S.I.NO. 1001 |
| 23 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4\\"x3/8\\"x1/12\\") and braced with flat from diagonals 20x5mm (3/4\\"x3/16\\") size with top and bottom rails or T-iron 40x40x6mm (1 1/2\\"x1 1/2\\"x1 1/4\\") with 38mm dia steel pullys with bolts, rails lockin arrangement, stoppers handles complete including applying a priming coat of approved lead paint. |
| 24 | Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or vamish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. |
| 25 | Supply and fixing of LED Tubelight with battern suitable for upto 1 x 22 watt LED Tube light fitting including tube on surface complete in all respect S.I.NO. 1413 |
| 26 | Supply and wiring of 3 number 10 sq. mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 32 mm dia heavy guage rigid steel conduit on surface, with two number 10 SWG copper earth continuity wire etc, complete in all respect. |
| 27 | Collection and consolidation of WBM top coat with 22.4 -53mm gauge stone ballast including supply of stone ballast of approved quarry, royalty.carriage uplo site loading unloading stacking, testing charges, trade tax and other taxes, octroi levies to and also including opening out stacks spreading stone ballast to required cambor and template and making mendies to retain water and also all leads and lifts, water charges,watering and compacting with 8-10 tonne smooth wheeled road roller, including all hire fuel charges of the roller and blinding with Type B screening materials required for propor completion of work. Including all material, labour, T&P, taxes, labour coss etc. complete as per direction of Engineer in charge but excluding GST (mord 405) |
| 28 | Supplying & Laying of 80 mm precast cement concrete I -shape Interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimesion 200x(160+120mm) O.P. Cement , smoot high gloss finish, skid resistant manufactured from rubber moulds through vibro- compression mechanism . The compressive strength of concrete paver block shall not be less than 30Mpa (m-30) and weight 5kg per no. conferming to IS:15658-2006 including cost of material ,labour ,T&Petc required for proper completion of the work as directed by Egneer-in charge.(ISI MARK INTERLOKING TILES) |
| 29 | Supply of fixing of Board |
| 30 | GST Please Enable Macros to View BoQ information |
