|
| 1 | Filling of low laying area with dredge spoil to the required level including transportation within a lead of 5 Km. by private trucks with polythene covering at the top to prevent spillage/ blowing of same including loading at one end and unloading at other end, spreading in layers, leveling, watering, compacting by VRR in suitable layers with supply of all labour, materials, T&P, all taxes, royalties, Port entry fees, engagement, hire & running charges of all equipments, operation expenses, all POL, cost of water, testing charges, excluding GST etc. all complete as per direction of Engineer-in-charge.N.B:- 10% voids shall be deducted from the measured quantity of sand after compaction to arrive at the payable quantity. |
| 2 | Earth work in excavation in all kinds of soil which may include ordinary soil, sand, silt, slusy soil with all leads, lifts and de-lifts, loading, unloading, handling, re-handling with cost of all labour, transportation and subsequent removal at appropriate time including site illumination, mobilization, demobilization, engagement, hire & running charges of all machineries, fuel & lubricants with all taxes, T&P, Port entry fees, all safety arrangements etc. all complete excluding GST and as per direction of Engineer in charge. |
| 3 | Supplying, mixing, transporting, laying in proper level & grade Cement Concrete 1:4:8 (1 Cement : 4 Coarse Sand : 8 hard granite metal of 40mm & below size Crusher Broken) for Plain Cement Concrete (PCC) including form works made of ply/ steel shutters, hoisting, laying over compacted surface, compacting by any approved means, finished smooth to the exposed surface to proper level & gradient, barricading the work site, curing etc. with supply of all materials, labour, T&P, all taxes, royalties, hire & running charges of all machineries, transportation charges, Port entry fees, cost of water, testing charges of materials, excluding GST etc. all complete as per direction of Engineer-in-charge. |
| 4 | Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge. |
| 5 | Supply Tor/TMT steel of any approved Steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour, materials, transportation charges, T&P, taxes, tollage, Port entry fees etc. all complete but excluding GST as per the direction of Engineer-in-charge.(NB: No payment shall be made for extra weight than theoretical co-efficient laid down in IS-1786. No Wastages shall be paid). |
| 6 | Providing Rigid and smooth leak proof centering & shuttering with form works made of ply/steel, painting with coltar/lubricant over the ply/steel after each use for RCC works in slab, wall, raft etc. including dismantling them after due period with cost of all material, labour, T&P, taxes, tollage, gate entry fees, transportion, staging etc. all complete excluding GST and as per direction of Engineer in charge. |
| 7 | Foundation and Plinth |
| 8 | Column & Beam |
| 9 | Lintel & Chajja |
| 10 | Providing, laying, spreading and compacting stone aggregates of IRC Gr-II (63 mm to 45 mm) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust, watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes, tollage, royalties etc all complete but excluding GST as directed by Engineer in charge. |
| 11 | Collecting, Conveying, Supplying and transportation of Quarry Dust of approved quality, conveying the same by private Trucks with all leads including loading at one end and unloading at the other, spreading quarry dust over the approved surface, compacting with VRR at minimum 8 to 10 Ton static load for both Dry & Wet rolling, all complete including testing charges as well as cost of all materials, labour, T&P, royalties, Taxes, hire & running charges of all equipments, Port entry fees, operator expenses, cost of water, fuel, lubricants, excluding GST etc. all complete as per direction of Engineer-in-Charge. |
| 12 | Providing and laying factory made chamfered edged cement concrete paver blocks in footpath, park lawn, drive way or light traffic parking etc. M30 strength and 80 mm thick, made by table vibratory method using PU mould, laid in required colour & parten over 50 mm thick compacted bed of sand , compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer throught vibratory compaction by using plate vibrator, filling the joints with sand and cutting the paver blocks as per required size and partern, sweeping the surface etc all complete with supply of material, labour, T&P, taxes tollage etc all complete excluding GST etc. all complete as per direction of Engineer-in-Charge. |
| 13 | Brick work in Fly Ash Bricks of size 25cmx 12cm x 8cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge (for all floors). |
| 14 | Removing old cement plaster from walls including raking out joints 12mm deep including stacking the useful materials for reuse and removing the debris within 50m with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place etc. all complete but excluding GST and as per direction of Engineer-in-charge. |
| 15 | Cement plaster with Cement Mortar of following proportion over brick work and concrete surface including chipping the concrete surface, watering the wall surface before plastering, with supply of all materials, labour, curing, taxes, tollage, royalties, T&P, scaffolding excluding GST etc. all complete as per direction of Engineer-in-charge. (For all floor). |
| 16 | 16mm thick cement plaster in CM (1:6) (outside). |
| 17 | 12mm thick cement plaster in CM (1:6) (inside). |
| 18 | Supplying fitting fixing of Vitrified floor tiles (premimum Quality 600 x600 mm size)in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with white cement including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.( New work). |
| 19 | Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles (premimum Quality 200 x300 mm or 200 x200 mm size) as approved by EIC in walls on 12mm thick bed of cement mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge. |
| 20 | 12mm thick Cement plaster with cement mortar (1:4) proportion, over concrete work, finished smooth to the exposed surface, rounding the corners wherever found necessary including punning with supply of all materials, labour, T&P, Port entry fees, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding GST as per direction of Engineer-in-charge. |
| 21 | Acrylic based Weather Coat two coats over a coat of primer to exterior wall surface with approved cement paint by brush to give an even surface up to the satisfaction of the Engineer-in-charge including scaffolding and curing with supply of all labour, materials, T&P, taxes, excluding GST etc. all complete as per direction of Engineer-in-charge. (for all floors). |
| 22 | One coat Priming with water bond cement primer to the newly plaster surface of the exterior Wall or over the existing putty surface of the interior wall of approved make & shade to make an even finished surface in all heights with all scaffolding and staging including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, port entry fees etc. complete but excluding GST as per direction of Engineer-in charge. (for all floors). |
| 23 | Back filling in foundation trenches by using the excavated material by the side of drain, culvert, sump & settling pond as per requirement within initial lead and lift, leveling, dressing, watering, compacting by any approved means with cost of all labour, T&P, transportation, hire and running charges of all equipments/ machineries, POL, all taxes etc all complete excluding GST as per direction of Engineer-in-Charge.. |
| 24 | Dismantling Old Brick Work/ RCC Structure in F & P and super structure at any height, any floor including stacking the useful materials for reuse and removing the debris & disposing the same at specified place as directed with supply of all labour, T&P, staging, scaffolding, etc. complete with all taxes, including leads & lifts, transportation but excluding GST etc. all complete as per direction of Engineer-in-charge. |
| 25 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect etc. all complete but excluding GST and as per direction of Engineer in charge. |
| 26 | Supplying, fitting & fixing of WPC door and window frames of required size as per requirment.The Door Frame should high scrrew holding capacity & fixing the metalic hold fast & shall be consolidatec by filling of Plaster of Paris with supply of all labour, materials, T&P, all Taxes,transportation, Port Entry fees, Staging etc. all complete but excluding cost of GST as directed by Engineer In-Charge. |
| 27 | 32mm thick flush door shutter made out of 32mm B.W.R. block board and with 1mm thick sunmica to both side pasted with adhesive including fixing fixtures like Godrej make Mortice Lock, Godrej make Door closure having 100mm Aluminum heavy hinges with cutting grooves in chaukaths mending good the damages etc. including cost of all materials, labour, T&P, taxes, all transportation, staging, scaffolding, etc. complete but excluding GST & as per direction of the Engineer-in-charge. |
| 28 | Supplying, fitting & fixing of factory made uPVC glazed/ sliding glazed window or Door with single/ double glass panes for windows & ventilators and Doors with the following specification. Frame : Made from the Extruded Lead Free (RoHS Compliance) uPVC Window Profile Section of size 60 x60mm (+/-2 mm) having outer wall thickness of 2.5mm (+/-0.2 mm) and multi-chambered, White in finish, duly reinforced with 1.2mm (+/-0.1 mm) thick galvanized U or Box type GI section. All the four corners shall be mitered cut & thermal welded so as to form window or Door frame. Frame shall be milled with drain and air equilizer hole in order to be water tightness and for drainage of accumulated water, if any, to outer side. Specified hinges fix to the frame complete as per manufactures specification and direction of Engineer in charge. Shutter : The shutter of window or Door shall be made of 78 x 60 mm (+/-2mm) Extruded Lead Free (RoHS Compliance) uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/-0.2 mm) provided with reinforcement of 1.2mm(+/-0.1mm) thick welded at all corners and fitted with uPVC glazing bead suitable according to the glass with K & O type inner and outer EPDM weather seal gaskets along with glass. The rate should include cost of all materials, labour, fittings & fixtures, T&P, all taxes, electricity expenses if any, all transportation, all leads & lifts, safety arrangements, Port Entry Fees etc all complete as per direction of Engineer-in-Charge but excluding GST. |
| 29 | Providing and engaging Hydra/ Crane on hour basis for Shifting of Pipes, sewage fittings and any pump house fittings, fixtures laid inside pump house peripheri or others required area including hire and running charges of hydra, cost of driver, POL, all taxes excluding GST etc. all complete as per direction of Engineer-in-charge.(Driver pass, Machine Entry pass will be borne by the contractor). |
| 30 | Supplying, transporting, fabrication and erection of GI pipe of required size, welding, fixing the pipes as per required profile with supply of all labour and material, machinery, cost of fuel, electrode, gas, consumables hire and running charges of all kind of equipments etc all complete excluding GST as per direction of Engineer-in-charge.Gate (4.5m X 1.6m) X 3 Nos. |
| 31 | 50mm GI Pipe |
| 32 | 40mm GI Pipe |
| 33 | Painting two coats with approved quality & shade enamel paint on new iron work over one coat of red oxide primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding GST as per direction of Engineer-in-charge. |
| 34 | Supplying of following D.I. pipe & fittings of good quality ….etc. with supply of all materials, labour, T&P, transportation charges, hire & running charges of all equipments, port entry fees, excluding GST, etc. all complete as per direction of Engineer-in-Charge. |
| 35 | 150mm DI Flanged Pipe. |
| 36 | 150mm DI Flanged Pipe of different length |
| 37 | 150mm DI Sluice Valve |
| 38 | 150mm x 150mm DI Flanged Tee |
| 39 | 150mm 90 DI Flanged Bend |
| 40 | 150mm D/F Tail Piece |
| 41 | 150 x 100mm D/F Tail Piece |
| 42 | 150 x 75mm D/F Tail Piece |
| 43 | Cast iron double flnged swing type non return valve of any approved make or equivalent confirming to IS-5312, flanged joint (PN-1.60) 150mm Dia. |
| 44 | Cast iron swing type foot valve of any approved make or equivalent confirming to IS-4038, flanged joint150mm Dia. |
| 45 | 75mm x 90 degree D/F DI Bend |
| 46 | Cast iron double flanged swing type non-return valve of any approved make or equivalent confirming to IS-5312, flanged joint (PN-1.60)150mm Dia. |
| 47 | Labour charges for Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7, Class K9, flanged pipes conforming to IS:8329-2000 of the following nominal diameter as per specification, port entry fees, etc. all complete but excluding GST as per direction of Engineer-in-Charge. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately).15mm Dia |
| 48 | Providing flanged joints conforming to IS:3114-1994 to flanged Cast Iron pipes/ D.I pipes or other pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete, port entry fees, etc. all complete excluding GST as per direction of Engineer-in-Charge.150mm Dia |
| 49 | Fixing of C.I/ D.I sluice valves/ N.R.V/ check valves/ Air valve/ water meter etc. as per specification, port entry fees, etc. all complete excluding GST as per direction of Engineer-in-Charge.150mm Dia |
| 50 | Supply, fitting, fixing of of electrical/ mechanical fittings/ fixtures of ISI mark with supply of all materials, labour, T&P, transportation charges, hire & running charges of all equipments, port entry fees, excluding GST, etc. all complete as per direction of Engineer-in-Charge. |
| 51 | Three Phase Monobloc Water Pump with following specificationHead Range: 44-56M,Discharge Range: 26-17LPSSunction Nozzle Size: 100MMDelivery Nozzle Size:80MMMotor Rating: 30HPVoltage Rating: 415V/ 50Hz/ Three PhaseMOC:Pump Casing: Cast IronMotor Body: Cast IronImpeller: Cast IronPump Shaft: Carbon SteelSealing: Gland Packed |
| 52 | PanelFully Automatic Star-delta Stater 22KW/ 30HP Type-MN25 FASD of L&T make/ similar items |
| 53 | Motor back Protection MCCB DN0/ 250M, 3Pole 100A of L&T make/ similar items Please Enable Macros to View BoQ information |
