|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.Bruss/stainless steel screws, all complete as per architectural drawinfgs and the directions of Engineer-in-charge. ( Glazing, paneling and dash fasteners to be paid for seperately). |
| 2 | For fixed portion Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) |
| 3 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required ( Fittings shall be paid for seperately). Anodised aluminium ( anodised transparent of dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 4 | Providing and fixing anodised aluminium grill (anodised transparent of dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. Brass/ stainless steel Screws @200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirment and direction of Engineer-in-charge. ( only weight of grill to be measured for payment) |
| 5 | Providing and fixing 12 mm thick prelaminated particle board flat. Pressed three layer or graded wood particle board conforming to IS:12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P.brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides |
| 6 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent of dyed to required colour or shade, with necessary screws etc. complete : 125mm |
| 7 | Providing and fixing ISI marked aluminium butt hinges anodised ( anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125x75x4mm |
| 8 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with ISI, IS:3564, embossed on the body, door weight upto 35 kg and door width upto 700mm), with necessary accessories and screws etc. complete |
| 9 | Providing and fixing aluminium tower bolts, ISI marked, anodosed ( anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 150x10mm |
| 10 | Providing and fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete . Stainless steel ( grade 304) wire gauze of 0.5 mm dia wire |
| 11 | Providing and fixing aluminium pull bolt lock, ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade , with necessary screws bolts, nut and washers etc complete |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required . In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 13 | Providing and fixing hard drawn steel wire fabric of size 75x25 mm, 50x50mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of 'L' shaped mild steel shear key welded with existing einforcement or MS structure including the cost of materials, labour, tool & plants as approved by Engineer-in-Charge. Wire Diameter (3.00MM) |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Please Enable Macros to View BoQ information |
