|
| 1 | Comprehensive Annual Maintenance Contract of EPABX system make Kanishka for 64 line/ extension i/c instruments, UPS, MDF, Related cabling etc. complete as required at site as per Inventory, additional terms and Conditions |
| 2 | Supplying and drawing following pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 3 | 2 Pair |
| 4 | 4 Pair |
| 5 | 10 pair |
| 6 | Supply and replacement of Analog phones having standard features like 16 digit LCD display, 2 way speaker, caller ID and number storage facility etc. complete as required.i/c rebate for dismantle material. |
| 7 | Supply,Installation and Replacement of 12 Volt and 7 AH Sealed Maintenance Free UPS Dry Battery, connection etc. as required i/c Rebate for dismantle material. |
| 8 | Comprehensive Annual Maintenance Contract of CCTV Surveillance Network system alongwith cable, supply etc. complete as required at site i/c upkeep of recording, data process & Maintenance as per Inventory, additional terms and Conditions attached. |
| 9 | Supply, Installation, commissioning and testing of CCTV bullet Camera with 1/3\\" Progressive scan CMOS, lens 6 mm, 3 Mega Pixel, HD 1080/720p Real time Video Recording, True day/Night, IP 66 rating, metallic body, IR range upto 40-50 Mtr. with power supply, suitable stand, extra safety housing i/c fixing at suitable place etc. complete as required as per specifications. |
| 10 | Supplying ,drawing,Installation,Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required.A) 1 run of cable |
| 11 | Servicing, Repairing, painting (Synthetic enamel paint of outer body and rubber paint in inner body)18/20\\" size Desert Cooler with Supply and Replacement of wood wool pad (i/c jali & binding wire), oiling/ greasing of Fan Motor & Pump, repair of all minor fault, loose connection etc. as required with re-installation at the same place as required. |
| 12 | Repairing of Desert Cooler 18\\"/20\\" Sweep i/c Replacement of following worn out parts, Rebate for dismantle material i/c connection, testing etc. complete as required. |
| 13 | Submersible pump set water lifting 1.5mtr. Capacity i/c Rebate for dismantle material |
| 14 | Fan Motor Blade M.S. / Plastic i/c Rebate for dismantle material |
| 15 | 3 Core copper readymade lead with ISI marked 5 Amp. 3 Pin top 2.5 mtr. length i/c Rebate for dismantle material |
| 16 | Cooler Fan Motor i/c Rebate for dismantle material |
| 17 | Capacitor 4 mfd i/c Rebate for dismantle material |
| 18 | Desert cooler side panel 18/20 made out of 20 swg GI sheet dismantling of old, refixing of wood pad, jali testing etc. as reqd. i/c Rebate for dismantle material |
| 19 | 5 Amp ISI marked 3 pin top i/c old dismantle rebate |
| 20 | Rewinding of cooler fan motor kit 3 speed i.c. ring, nut, bolt etc. i/c Rebate for dismantle material. |
| 21 | Supply,fixing and Replacement of Desert Cooler 18” size made of MS Sheet 18/20-SWG including Pump for Water Lifting Capacity up to 1.5 mtrs, 3-Speed Cooler Fan Motor, Side Panel, Front Grill, ON/ OFF Rotary type Switch, Wood-Wool Pad, 3C Cu. readymade Lead with ISI 5 Amp 3-Pin Top i/c Rebate for Dismantle Material complete etc. as required. |
| 22 | Supply and installation of Powder Fire Extinguisher (Stored Pressure type) Capacity 4 Kg duly ISI marked conforming to IS:15683:2018 ,with IS 4308,ISI marked ABC powder complete with squeeze grip release valve,discharge pipe,locking arrangement,pressure gauge,operation manual and bracket, operating temperature : -30°C to +60°C. |
| 23 | Supply & installation of CO2 type Fire Extinguisher ,ISI marked conforming to IS:15683 ,Capacity of 4.5 kg. Complete with delivery hose horn ,wheel type release valve ,Locking arrangement ,operation manual and bracket .Operating Temperature --30°C to +60°C. |
| 24 | Refilling and refixing of ABC Dry powder type fire extinguisher of capacity 4 kg i/c hydrostatic pressure testing etc.as per ISI standard required |
| 25 | Refilling and refixing of CO2 type fire extinguisher of capacity 5 kg i/c hydrostatic pressure testing etc.as per ISI standard required |
| 26 | Refilling and refixing of CO2 wheel type fire extinguisher of capacity 6.5 kg i/c hydrostatic pressure testing etc.as per ISI standard required |
| 27 | Supplying and Replacement of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI -EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). i/c rebate for dismantle material. |
| 28 | 120 Watt |
| 29 | Supplying and replacement of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI≥70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beamangle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time(LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin) ,SDCM(Standard Deviation Color Matching) <5,Maximum power consumption should not more than the specified rating and Fixture shall be ofrelevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required withMinimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).i/c rebate for dismantle material |
| 30 | 100 watt |
| 31 | SITC of Complete Glow Backlit Display Hoarding Board size Length-13feet ,Height-5 feet and 6 inch deep with printed on star light flex, LED tube fittings 20watt duly fabricated mild steel square 1\\"x1\\" . hollow tube frame at the Entrance Gate of the office of Dy.Director, PM-UDAY,Deepali Chowk, Rohini. Please Enable Macros to View BoQ information |
