|
| 1 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain windowsills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 2 | 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | 1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size). |
| 4 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 6 | 1:1½:3 (1 cement : 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 8 | Suspended floors, roofs, landings, balconies and access platform |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. |
| 10 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 12 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 15 | Locally best available seasoned hard wood |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.. (Note:Butt hinges and necessary screws shall be paid separately) |
| 17 | Kiln seasoned and chemically treated hollock wood a)30 mm thick shutters |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick . |
| 19 | Kiln seasoned and chemically treated hollock wood. |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : |
| 21 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 22 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 23 | 125x64x2.50 mm |
| 24 | 100x60x2.50 mm |
| 25 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws etc. complete. |
| 26 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 27 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 28 | 250x16 mm |
| 29 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 30 | 200x10 mm |
| 31 | 150x10 mm |
| 32 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete |
| 33 | 125 mm |
| 34 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 35 | Providing and fixing to existing door frames. |
| 36 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 37 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 38 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 39 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 40 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i)Single socketed pipes. |
| 41 | 100 mm diameter |
| 42 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 43 | Coupler a) 100 mm |
| 44 | Bend 87.5° a) 100 mm bend |
| 45 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 46 | 1:6 (1 cement: 6 coarse sand) |
| 47 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 48 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 49 | Applying priming coat : |
| 50 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works |
| 51 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 52 | Two or more coats on new work. |
| 53 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 54 | Old work (one or more coats) |
| 55 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 56 | Two coats. |
| 57 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 58 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. |
| 59 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 60 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 62 | One or more coats on old work. |
| 63 | French spirit polishing : |
| 64 | One or more coats on old work. |
| 65 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead : |
| 66 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 67 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 68 | Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) |
| 69 | Renewal of old putty of glass panes (length) . |
| 70 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of EIC |
| 71 | Dismantling 15 to 50 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 72 | Internal Work- Exposed on wall |
| 73 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge |
| 74 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 75 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 76 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 77 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 78 | Of area 3 sq. metres and below |
| 79 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 80 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 81 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 82 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 83 | 10 litre capacity - White |
| 84 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 85 | White solid plastic seat with lid |
| 86 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 87 | Flexible pipe (i) 32 mm dia |
| 88 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 89 | 20 mm nominal outer dia. Pipes. |
| 90 | 25 mm nominal outer dia. Pipes. |
| 91 | 40 mm nominal outer dia. Pipes. |
| 92 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 93 | a) 45 cm length i) 15 mm nominal bore |
| 94 | Providing and fixing C.P. brass bib cock and stop cock of approved quality conforming to IS:8931: |
| 95 | 15 mm nominal bore. |
| 96 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 97 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
| 98 | 15mm nominal bore |
| 99 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 100 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 101 | Providing and fixing PTMT grating of approved quality and colour. |
| 102 | Circular type. a) 100 mm nominal dia. |
| 103 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: |
| 104 | (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 105 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 106 | Bars upto 12 mm diameter |
| 107 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 108 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 109 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 110 | 12 mm average thickness. |
| 111 | Supplying of Styles & rails for wooden door / window shutters complete. (Payment to be made on area of new work only). (i) 35 mm thick shutter (a)Local hard wood |
| 112 | Easing door, window shutters with / without removing and refixing the same as per direction of the Engineer - in - charge. |
| 113 | Repairing of damaged door, window shutter i/c dismembering the parts & refixing the same after repairing with same/new screws all complete as per direction by the engineer-in charge (payment of new panels, styles, rails hinges shall be paid in respective item). |
| 114 | Providing and fixing high pressure PVC ball valve (Solvent Weld) of make Supreme or equivalent with pressure class SCH:80 of approved quality including the cost of necessary uPVC socket, pieces of pipes etc. required for the work complete as per direction of EIC |
| 115 | 20 mm dia. nominal bore |
| 116 | Rewashring of 15 mm dia stop cock /bib cock/pillar cock including gland packing if nesessary |
| 117 | Labour for dismantling GI pipes with fittings. |
| 118 | upto 25mm dia |
| 119 | Removing chokage of G.I pipe including the cleaning pipe and refixing it |
| 120 | Supplying, fitting and fixing PVC flushing cistern parts after removing the defective parts complete as per direction of the EIC |
| 121 | Polythene syphone with nut , plunger plate, plunger rod and lifting device complete. |
| 122 | Handle lever set for PVC flushing cistern. |
| 123 | Cleaning the glazed walls/flooors tiles including sanitary fittings of WC/Bath etc. with oxalic acid , broom, brush and scrapper all complte per direction of engineer -in- charge. ( for Type- IV Qtr. ) |
| 124 | Removing cistern i/c cleaning, washing with muriatic acid and refixing the existing fittings complete. |
| 125 | Providing and fixing vertical blinds at window of approved size with top channel and other fittings as per direction of Engineer in charge. |
| 126 | Credit value for dismentled materials. |
| 127 | G.I. pipe 15 mm |
| 128 | G.I. pipe 20 mm |
| 129 | G.I. pipe 25 mm Please Enable Macros to View BoQ information |
