|
| 1 | Supplying and fixing 0.5 A to 5 A rating, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\\"; (a) SP, Cat A |
| 2 | Earthwork in excavation by mechanical means (hydraulic excavator)/ manual means in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m.; All kinds of soil |
| 3 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 4 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing; All works upto plinth level |
| 5 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 6 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.; 3 Core 2.5 sq.mm |
| 7 | Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.; 4 Core 10 sq.mm |
| 8 | Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.; 3 1/2 Core 35 sq.mm |
| 9 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.; (b) In rocky strata |
| 10 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.; (4) 4 x 10 Sq. mm. |
| 11 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.; (2) 3 1/2 x 35 Sq. mm. |
| 12 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.; (1) 3 x 1.5/2.5 Sq. mm. |
| 13 | Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required |
| 14 | Supplying and laying 6 SWG GI wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required |
| 15 | Supply Installation, testing and commissioning of 7 m high hot dipped galvanised octagonal poles with 'B' class G.I. Pipe, duly welded having bottom dia. from 120 to 130 mm, top dia.from 60 to 70 mm with suitable 4nos. M20 X 600 mm J type foundation bolts complete with base plate 200 x 16 mm . Make philips, wipro, RR Ispat as required and directed by engineer incharge. |
| 16 | Supply and Installation of 1000mm single arm bracket HDGI Make philips, wipro, RR Ispat as required and directed by Engineer in Charge |
| 17 | SITC of LED Street light fitting of 60-80W, including lamp, with PF> 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete with all required accessories of make Bajaj, Wipro, Havells, K-Lite, Philips as required and directed by Engineer in Charge. |
| 18 | Supply and laying of PVC Wire 2C X 2.5 Sq.mm. i.i KV grade for service connection. |
| 19 | SITC of Cable Junction Boxes IP 66/67 “weather proof’ (Size – 300 x 150 (LXB)mm + Cable termination upto 16 Sqmm size.), for outdoor installation (with knockouts for cable entry) with bracket for mounting and all accessories of make hensel as directed by the Engineer-in-Charge |
| 20 | Supply Installation, testing and commissioning of following all Outdoor Feeder Pillar/Panels comprising below points. 1)-Panels shall be fabricated out of 16 /14 swg CRCA sheet steel, with necessory structural supports in form of structural steel sections. 2)-Floor mounted, IP-55 degree protection, Bottom or Top bus duct or cable entry as per the case & Bottom cable exit steel, 2mm frame, 1.6 mm compartments & tank process treated & 2-times Epoxy painted.3)-Proper gland size holes to be provided by the manufacturer with proper sticker and danger sign on all sides of panel.4)-Current Density-1.2 Ampere/1 Sq.mm (IS-8623 for factory built assembly).5)- Earthing terminal at both end.6)-Paint- Exterior Enclosure Tank process treated & 1 coat of Epoxy painted and 2 coat of Siemens grey as per shade RAL7032 for exterior and Black for base frame, everywhere maintaining micron upto 75.7)All Starters are according to Type-II Cordination, if any.8)Any other related details as per Engineer Incharge Please Enable Macros to View BoQ information |
