|
| 1 | Dismantling Stone slabs and tiles of any description, interlocking paver block laid and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 2 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 sqm exc 50mm and n exc 100 deep complete all as specified and directed. |
| 3 | M & L for 75 mm thick (compacted thickness) WBM with granite top or basalt coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with a power roller, 8 to 12 tonnes to form a true surface complete all as specified and as directed. |
| 4 | M&L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen) VG -10 @ 10 Kg per 10 Sqm on unsurfaced water bound macadam including preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed. |
| 5 | M & L for repair to potholes any depth not exc 1 sqm each in area including sweeping from dust & mud or water securing sunken surfaces in roads etc cutting around edges to at least 25mm in depth but making good by applying tack coat @ 5kg per 10 sqm (using paving bitumen) putting in premixed bituminous macadam, well rammed and sealed with binder 9.8kg per 10sqm blinded with 0.09cum of stone chippings, 6.3mm size and well rammed (including supply of premixed macadam, binder and chippings)depth of potholes exc 30mm complete all as specified & directed. |
| 6 | M&L for premix bituminous, macadam using with paving bitumen VG-10 of any penetration of consolidated thickness n.exc 75mm with 4% binder content by weight of total mix, laid & rolled and compacted to required gradient and camber with 8 to 10 tonne power roller complete all as specified and directed by Engr-in-Charge. |
| 7 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and or applying evenly a priming/tack coat with bituminous primer Paving bitumen) VG-10 @ 5 kg per 10 sq metre complete all as specified and directed. |
| 8 | Providing Bituminous premixed carpet,30 cm consolidated thickness,with 0.41 cu.m. of stone chippings (0.28 cum of 12.5 mm size and 0.13 cum of 10mm size mixed with 21.9 kg of binder paving bitumen VG-30, rolled and compacted with vibratory roller and compacted with with 8 to 10 tonne power roller to required camber and applying Premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface complete all as specified and directed. |
| 9 | M & L for laying hot applied thermoplastic compound (paint) 2.5mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T & P etc required for proper completion of work incl all other charges. Th e finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No 803 as per IRC. Painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm wide with road marking paint white, golden or yellow complete all as specified and as directed. |
| 10 | Supply & fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 11 | Supply and fix in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 12 | Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all asspecified and directed. |
| 13 | Demolition of precast concrete block walling, dressed stone work built in cement mortar complete all as specified and directed |
| 14 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all asspecified and directed. |
| 15 | M&L for factory made Pre-cast cement concrete as in block masonry with solid blocks, Type C-1 , 1:3:6 (20 mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:6, complete complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement incl addition thickness provided as floating/setting coat including mixing only water proofing compound as per manufacturer's instructions on external walls complete all as specified and as directed. |
| 17 | M&L for preparing newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed. |
| 18 | M&L For Cement concrete Type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed. |
| 19 | M & L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in coping, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 20 | Extra for forming fair finished drain or channel above 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed. |
| 21 | S&F in repairs circulate polycarbonate convex mirror 600 mm dia with mild steel pipe of adequate size for fixing of mirror incl embedding in PCC 1:2:4 Type B-1 (150X150X300 mm) complete all as per manufacturer's instructions complete all as specified and as directed. |
| 22 | S&F in repairs speed bumps, made of heavy duty tough rubber of size 500mmx 365 mm x 50 mm , black and yellow in color, Make Dark eye Model No 1008 or equivalent in 3M/STP Ltd. complete all as specified and as directed. |
| 23 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 24 | M&L for 50 mm thick PCC, Type C-1 , 1:3:6 (20 mm graded aggregate) , as in floors for levelling course on existing cleaned surface etc. for laying paver blocks, chequred tiles etc finished rough to receive floor finishes complete complete all as specified and directed. |
| 25 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified and as directed. |
| 26 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 27 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 28 | M & L for providing Precast cement concrete(reinforced) type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) set in cement mortar 1:6 as in landings, for RCC cover slabs factory made for drains cover with plain faces including necessary form work as required complete all as specified and directed. |
| 29 | M & L for applying 02 coats of synthetic enamel paint on kerb stones after preparing new surfaces and applying one coat of primer of approved color and design complete all as specified and as directed. Please Enable Macros to View BoQ information |
