|
| 1 | Item Rate BoQ 82548/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: ADDL/ALTN OF BATHROOM, DRESSING AREA AND REPLACEMENT OF WINDOW IN BLDG NO P-454 MG ENCLAVE UNDER GE (S) JAIPUR MIL STN JAIPUR CA NO: CWE/JPR(S)- OF 2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM |
| 3 | M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified. |
| 4 | M&L for rendering 15mm thick in cement mortar 1:4 on stone, brick masonry surfaces or surface other than fair face of brick work of walls, finished fair & even. |
| 5 | M&L for preparing new plastered surfaces of external walls and applying two coats of weather proof paint (Exterior Acrylic Emulsion Paint) over a coat of 1 mm thick wall care putty and and over a coat of primer all as specified and directed with all scaffolding arrangement or working platform |
| 6 | M&L for preparation of new plastered surfaces and applying two coats of Oil boud distemper of approved shade/tint over a coat of birla wall care putty on wall and ceilings all as specified & directed by Engineer-in-Charge |
| 7 | M&L for complete removal of existing surfaces of walls, prepare the surface of wall and applying two coats of Oil bound distemper of approved shade/tint over a coat of birla wall care putty on walls and ceilling all as specified & directed by Engineer-in-Charge |
| 8 | Complete removal of exiting treatmetent, preparing surface by sand paper to obtain truely smooth surface, and applying two coats of weather proof paint (Exterior Acrylic Emulsion Paint) over a coat of 1 mm thick wall care putty over a coat of primer all as specified and directed with all scaffolding arrangement or working platform |
| 9 | S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or in trenches, Type 'B', ISI marked of 110mm bore including taking down of existing pipe. |
| 10 | S&F UPVC (SWR) bend of any radius of 110mm bore including taking down of existing bend . |
| 11 | PVC (SWR) floor trap of 75mm dia outlet, plain with grating including jointing with solvent cement. |
| 12 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors |
| 13 | S&F PVC (SWR) bends any radius 75mm dia |
| 14 | S&F PVC (SWR) vent cowl 110mm dia |
| 15 | M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement |
| 16 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity. |
| 17 | S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair |
| 18 | M&L for new galvanised steel water tubing 15mm medium grade with all fittings and fixed complete to walls and ceilings or laid in floors |
| 19 | M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors |
| 20 | Supply and fixed in repairs CP angle cock 15mm dia fancy type cast coper alloy |
| 21 | S&F in repair CP cast copper alloy bib taps long body FANCY TYPE with wall flange fancy type of 15 mm bore quarter turn , complete all as specified |
| 22 | Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type two way Bib Cock complete all as specified and directed. |
| 23 | S&F in repairs CP overhead shower size 250x250mm square with revolving joints (with body rotation) & 400mm long arm shower with rabit cleaning system and all fittings |
| 24 | S&F in repair Toilet paper holder complete all as specified and directed. |
| 25 | S&F in repair CP single towel rail 600 mm complete all as specified and directed. |
| 26 | S & F as in repairs Multipurpose Towel Rack, 65x20.3x11.3 cm complete all as specified and directed. |
| 27 | S&F in repair Soap dish complete all as specified and directed. |
| 28 | S & F in repair for CP hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. |
| 29 | S & F in repair hand shower 105 mm dia round shape multi flow with air effect (ABS Body & Face Plate Chromium Plated) with rubit cleaning system and incl Easy flex tube in chromium finish 1.5 meter long with both end nuts complete all as specified and directed. |
| 30 | Concealed body single lever brass CP Basin mixer wall mounted for mixing hot and cold water, including divertor, operating lever, Cartridge sleeve, wall flange, Nipple, Spout with exposed part kit wall plate screwed for iron pipe 15mm bore (minimum total weight of concealed and exposed part 1400 gram), fixed in repairs. |
| 31 | Concealed body single lever brass CP mixer for mixing hot and cold water with dual (shower and spout) divertor, outlet exposed part kit (wall plate and shower controller knob), screwed for iron pipe 15mm bore (minimum total weight of concealed and exposed part 1500 gram), fixed in repairs. |
| 32 | S & F in repair Corner glass shelf (with bracket). |
| 33 | M&L Towel ring of brass CP Square flange |
| 34 | S&F in repair 15mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm- 142 gms) |
| 35 | S&F in repair PVC connection 15mm dia 60cm long with 2 Nos brass check nuts with washer complete all as specified |
| 36 | S&F in repair waste coupling brass chromium plated 32mm dia for wash hand basin all as specified |
| 37 | S&F Snow White color Vitreous China WC Rimless Wall Hung with UF Soft close seat cover, Hinges, Accessories Set, Single Piece Slim concealed cistern with floor mounted frame, Divertor Installation Kit with twin Flush Control CP plate including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. complete all as directed by Eng-In-Charge. |
| 38 | S&F in repairs counter/table top rectangular wash hand basin vitreous china white including all fittings complete all as specified. |
| 39 | S&F in repairs Tumblor holder in Bathroom |
| 40 | S&F in repairs Liquid soap dispenser holder in Bathroom |
| 41 | S&F in repairs CP grating 100mm dia round with or without waste hole fixed on floor/nahani trap fixed with cement complete. |
| 42 | S&F of 20 mm dia Drapery Fancy type curtain rod of stainles steel for door/window with curtain bracket, Finials heavy supported fixed by self screw in wall |
| 43 | S&F 18mm Thick HDHMR (High density high moisture resistant) kitchen cupboard shutter of one side colour/white Laminated and other side decorative as in modular kitchen / cabinets / door shutter fixed with minifix hardware where ever requred including edges band 22 mm wide 0.80 m thick (of pearlwood or equivalent) of matching colour on exposed surfaces of board fixed with polymaster adhessive of approved make (REHAu or equivalent) including trimming edges of edge band to true line of thickness of board by manual trimming .fixed to wall etc complete all as specified. |
| 44 | S&F 6mm thick HDHMR (High density high moisture resistant ) board of both side white laminate as in back of kitchen cabinets / partion of cupboard etc complite all as directed. |
| 45 | S&F soft close clip on hinge bright finish (Auto close hinges) complete all as specified. |
| 46 | S&F Stainless Steel Handles of size 150mm fancy type of approved make cupboard all as specified and directed. |
| 47 | S&F Stainless Steel Handles of size 100mm fancy type of approved make cupboard all as specified and directed. |
| 48 | S&F in reapirs floor door stopper of Brass body single legged with rubber shoe fixed to bottom rail of door as directed |
| 49 | M&L for 30mm ( average thickness ) PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in floors. |
| 50 | M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed. |
| 51 | M&L glazed ceramic Coloured Glossy tiles in vertical surface n exc 0.72 mm including 10mm thick layer of screed bed in cm 1:4 on verticle surfaces and jointed in neat cement slurry, Adhesive and pointed in white or colour grouting to match the surface of tiles as on verticle surfaces as skirting and dado etc,complete all as specified and directed. |
| 52 | M&L Non skid ceramic coloured tiles 7 to 8mm thick area of each tile n.exc 0.36 sqm in floors etc set and including 15mm thick layer of screed bed in cm 1:6 on floor surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 53 | S&F light shade Vitrified Ceramic digital tiles edge cut 10 mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) finished fair and even . |
| 54 | M&L for granite 18 to 20mm thick as in steps, pillars, Jambs, counter slabs of WHB (of any type) work (table rubbed and polished) counter of WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 55 | M&L for Marble work 18 to 20mm thick (table rubbed and polished) in Jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade |
| 56 | M&L 75 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection. |
| 57 | Demolition PCC in ground floors above and pavings n exc 15 CM thickness (below above ground level |
| 58 | M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even all as specified and directed by Engineer-in-charge. |
| 59 | M&L for Chequered designer cement concrete tiles PU Moulded 30cmx30cmx25mm thick, set,jointed and pointed in neat cement slurry in floors and 15mm thick screed bed in CM (1:6) all as specified. |
| 60 | M&L for Providing and laying 60mm thick factory made machine pressed chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength thickness and size / shape made by table vibratory method using PU mould laid in required colourful and pattern over and including 50mm thick compacted bed of fine sand ,compacting and proper embedding / laying of inner locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 61 | Same as per item no 59 except paver block complete all as specified. |
| 62 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and as directed |
| 63 | Taking down chowkats or frames (W/out taking of shutters) not exceeding 1.5 Sqm each. |
| 64 | Brass handles, cast type, polished bright 150mm long grip. |
| 65 | Brass barrel tower bolts 200mm long, with cast or sheet barrel and rolled or cast bolts and fixed. |
| 66 | S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete. |
| 67 | S&F Brass, sliding door bolt 150mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed |
| 68 | S&F 5mm thick looking mirror 600*1200 and looking mirror edges moulding, including hole 4 Nos for looking mirror and incl S S cap screw complete all as specified. |
| 69 | S&F as in repairs LED Lite Looking Mirror 600*800 in shape, made of premium quality “Saint Gobain” glass highly resilient and with great shine. Color Of The LED – Warm White with Smart touch switch or sensor that makes it glow as soon as one approaches the mirror, complete all as specified and directed. |
| 70 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. ( Note: The unit rate quoted by contractor included cost of 5mm glass, stainless steel wire cloth and includes all other connected accessories, filling of gaps and holes with silicon and necessary required arrangements) |
| 71 | S & F Solid PVC Moulded Door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforce with M.S square tube, high strength suppling & fixing in opening as per specification. |
| 72 | Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing & fixing in the frame at site as per specification |
| 73 | Powder coated aluminium (thickness of powder coating not less than 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete. |
| 74 | M&L Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium Door, window and ventilator shutters, fixed/ sliding/ Openable without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws handle, tower bolt, handle and stopper, etc. complete all as specified |
| 75 | Providing and fixing suspended false ceiling using mineral fibre board of size 600 x 600 x 15mm as ceiling over and including suspension metal(galvanised iron) system ) designer grid (15mm grid 8mm return) bevelled tegular suprafine XL 15mm / silhouete complete including necessary hanging system arrangement 6 mm dia suspenders as per manufacture's instruction which is required to be made from existing RCC roof/stone slab of building or steel framed structure complete all as specified and directed by Engineer-in-Charge. |
| 76 | 5mm thick figured glass, pin head type not exc 0.5sqm in each pane, ordinary quality and glazing in louvers or existing snap beading and neoprene/rubber gasket in aluminium frames. |
| 77 | M&L for Fixing 10mm thick frosted toughened glass for wall to wall in L shape with sliding/openable door in bath internal area fixed with SS channel, slider, fitting and hand rail in both side at different bathroom complete all as specified and directed. |
| 78 | Excavation in trenches not exc.1.5 m wide and not exc.1.5 m in depth for foundation or for walls and getting out in soft/loose soil. |
| 79 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete |
| 80 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 81 | M&L for Cutting opening in cement concrete walls without reinforcement (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings,including trimming surfaces toreceive rendering, etc. |
| 82 | M&L for Cutting channels, grooves or rebates exc 15cm girth, but n exc 30cm and trimming surface |
| 83 | M&L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:6 |
| 84 | Brickwork with subclass ‘B’ burnt bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4. |
| 85 | Returning,filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in hard/dense soil. |
| 86 | Removal of excavated soil to a distance exc. 250m but not exc. 500m and depositing where directed. |
| 87 | Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 88 | S&F 3mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with L-type or J-type or cranked hook bolts including bitumen washers etc. as in roof, walls etc all as specified and as directed by Engineer-in-charge. |
| 89 | Gusset Plate or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices, angle brackets |
| 90 | S&F Steel work in tubular trusses, ladder, tank stand complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and directed by EIC. |
| 91 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome |
| 92 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces walls ,floors and match to colour coding etc |
| 93 | M&L for Point wiring complete with1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 1.5 Sqmm ( Phase-Red,Neutral -black and earth continuity conductor 1.5 sqmm (Green) drawn into and incl. concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked i, including MS sunken box for mounting fitting like Modular switches, sockets, fan regulators type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings.(i) One light / fan /bell point controlled by one, one way switch. |
| 94 | (ii) One 3 pin 5 Amp socket out let on the same board with other switches |
| 95 | (iii) One 5 Amp socket independent controlled by one, one way switch. |
| 96 | All as per Item No 92 above but PVC conduit 25 mm dia medium grade with all accessories ISI marked with copper conuctor cable of size 4 Sqmm for 3 pin 15 Amps socket outlet on independent board, including 4.0 Sqmm copper cable continuous earth wire and connecting to common earth dolly. |
| 97 | S&F in repair Modular switch 1 way 6A,1 module complete all as specified and directed . |
| 98 | S&F in repair Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed . |
| 99 | S&F in repair Modular switch 1 way 16A,1 module complete all as specified and directed . |
| 100 | S&F in repair Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed . |
| 101 | S&f in repair modular PVC white cover plate with frame Following accessories:-(a) White cover plate with frame,3 module |
| 102 | (b) White cover plate with frame,8 module |
| 103 | S & F PVC blanking plate one module comple. |
| 104 | M&L in repair of Ceiling rose 3 phase/PVC/polycarbonate, isolated body 65x50mm, three terminals complete all as specified and directed.. |
| 105 | 7. S/F in repair of LED tube light fitting 1x 20 watt (4 feet long) high-quality materials and design,extruded aluminium housing enhances safety high quality PC diffuser reliable and robust housing structure ,maximize the endurance over the life time slim integrated design,easy to install efficiency in warm white /natural white connecting up with three core flexible copper conductor cable of three core suitable for size from cceiling rose complete. |
| 106 | S/F in repair LED light fitting miirror type with high out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder warm white /natural white including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from cceiling rose complete. |
| 107 | S/F PVC air fresh fan AC single phase 230 V of size 200/250mm sweep heavy duty with blades and frame and louvers all as specified and directed |
| 108 | S/F PVC wall mounted fan 450 mm sweep, AC ,single phase, 230 V,RPM 1500 heavy duty with blades and frame complete all as specified and directed |
| 109 | S/F electric water heater,storage type steel body with copperinner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. completeall as specified and directed. |
| 110 | S/F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB of 20 Amps 220 volt comple all as specified and directed. Total in Figures 0.0 0.0 0.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
