|
| 1 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed by Engr-in-Charge. |
| 2 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations, shafts, wells, cess pits, manholes, for taking out old pipe and laying new pipe line, for laying cable etc. not exceeding 10 Sqm on plan and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed by Engineer-in-charge. |
| 3 | Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) in cement concrete in foundations, filling and mass concrete, complete all as specified and directed. |
| 4 | Material and labour for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 5 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. |
| 6 | Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. |
| 7 | Material and labour for 40mm PCC 1:2:4 type B-0 for Damp proof course to horizontal or vertical surfaces including necessary formwork, complete all as specified and as directed by Engineer-in-charge. |
| 8 | Material and labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams, bases forcolumns, etc., basement slabs,under-reamed piles and mass concrte, complete all as specified and directed. |
| 9 | Material and labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) columns, pillars, piers, postsand struts, complete all as specified and directed. |
| 10 | Material and labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 11 | Material and labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, lintels, deck slabs and in shelves and the like, complete all as specified and directed. |
| 12 | Material and labour for 25mm thick providing precast cement concrete 1:2:4, type B0 (12.5mm graded stone aggregate) set in CM 1:4, as in cover slabs (for manhole, drains etc) with plain fair faces, incl demolition of existing, complete all as specified and as directed by Engineer-in- charge. |
| 13 | Use and waste of formwork to soffits of suspended slabs such as cooking platform, shelves, landings and similar work; not exceeding 200mm thick (horizontal or sloping) flat in fair finished surfaces of concrete, complete all as specified and directed. |
| 14 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat in rough finished Add for fairsurfaces of finished concrete, complete all as specified and directed. |
| 15 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions,rough finished Add for fairsurfaces of finished concrete(Square, Circular rectangular on planor polygonal) complete all as specified and directed. |
| 16 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. flat in rough finished Add for fair surfaces of finished concrete, complete all as specified and directed. |
| 17 | Material and labour for mild steel TMT bars 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 18 | Material and labour for mild steel TMT bars 6 to 8 mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 19 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of Brick walls or concrete surfaces, finishing the surface fair and even complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | Material and labour for rendering 5mm thick in cement mortar (1:3) on concrete surface of ceiling, finished fair, even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | Material and labour for rendering 15mm thick in cement mortar (1:4) on otherthan fair faces of Brick walls or concrete surfaces, including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.(Note :- WPC shall be measured & paid separately as Supply only) |
| 22 | Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | Material and labour for preparing new plastered surfaces of walls and applying two coats of cement base paint on external plastered surfaces, complete all as specified and directed. |
| 24 | Material and labour for preparing new plastered surfaces on internal wall and applying three coats of white wash, complete all as specified and directed. |
| 25 | Material and labour for preparing new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 26 | providing and fixing factory made extruded aluminium ventilitaros with 50 micron powder coating of frame of 63.5x63.5x1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40apeture in upper 455 portion of shutters and to be fixed with and including EPDM gasket to tender the glazing air and water tight etc & aluminium beeds 20mm size with, complete all as specified and directed. |
| 27 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out 5mm thick plain clour PVC sheet reinforced with MS square tube including painting of edges to match with sheet, all as specified & shown in relevant drawing of item No. 8095 in MES Schedule SSR-2020 (Part-II), fixed in opening B13 complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | Supply & Fix 30mm thick factory made moulded PVC door (Wood free) consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provison at lock height complete as per manufacturer’s, complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Supply and fixing for butt hinge ISI Marked 75mm size, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 30 | Supply and fixing for 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | Supply and fixing for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section, complete all as specified and as directed by the Engineer-in-Charge. |
| 32 | Material and labour for hardcore of broken stone or boulders exc 63mm but n exc. 100mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled/rammed to a true surface, complete all as specified and as directed by the Engineer-in-Charge. |
| 33 | Material and labour for 100mm thick PCC 1:4:8 type D-2(using 40mm graded granite stone aggregate) in sub base, complete all as specified and directed. |
| 34 | Material and labour for 40mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as floor finish, complete all as specified and as directed by the Engineer-in-Charge. |
| 35 | Material and labour for joint free colour non-Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and as directed by the Engineer-in-Charge. |
| 36 | Material and labour for colour glazed ceramic tiles in vertical surface 450 x 350 x 7mm / 350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles including 15mm thick rendering cement mortar 1:4, complete all as specified and directe. |
| 37 | Supply & fix of 15mm size PVC connections with PTMP nuts of length 450mm, complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | Material and labour for 100mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 39 | Supply & fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | Supply & fix 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge. |
| 41 | Material and labour for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | Cutting, chases, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth, complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm bore pipe line, complete all as specified and as directed by the Engineer-in-Charge. |
| 44 | Supply and fixing for ISI marked 15mm bore bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | Supply and fixing for trippled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified in SSR part-I, complete all as specified and directed. |
| 46 | Supply and fixing 15mm bore stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by the Engineer-in-Charge. |
| 47 | Supply & fixing for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | Supply & fixing for pillar tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | Supply & fixing for viterious china white wash hand basin flat back white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 type, complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | Supply & fixing for 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC, complete all as specified and as directed by the Engineer-in-Charge. |
| 51 | Supply & fixing for vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm white , with integral foot rests, complete all as specified and as directed by the Engineer-in-Charge. |
| 52 | Supply & fixing for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe, complete all as specified and as directed by the Engineer-in-Charge. |
| 53 | Material and labour for 15mm ball brass valves , high pressure , with polythene float and flynut complete , screwd for iron pipe or brass ferrule and fixed, complete all as specified and as directed by the Engineer-in-Charge. |
| 54 | Supply & fixing for soap dish, any type, fixed to plugs with chromium plated brass screws, completed all as specified and directed. |
| 55 | Supply & fixing for 32mm dia PVC waste pipe for wash hand basin / Kitchen sink / Urinal etc, completed all as specified and directed. |
| 56 | Supply & fixing of Angle valve 15mm bore stop valve, fancy type, brass chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 57 | Supply & fixing for brass chromium plated tublar towel rail, 20mm dia, D type 60cm long between flanges, completed all as specified and directed. |
| 58 | Supply & fixing for grating doom 100mm dia of PTMT (min weight 25gms) completed all as specified and directed. |
| 59 | Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base flooring/hard standing/plinth protection, complete all as specified and directed. |
| 60 | Material and labour for RCC NP3 150mm diameter pipes laid on 150mm thk bed with excavation in any type of soil, including manhole/drop manhole of standard size (0.7x1.65M) made of brick masonsry /RCC/pre-cast RCC with with SFRC ventilating cover and frame includes all items and activities to execute and make sewer line functional, complete all as specified and directed. |
| 61 | Cutting into existing 150mm dia man hole manholes for connecting new drains, making goodto pipe and rendering, cutting outexisting benching for and formingbranch channel (1/2 round or 3/4section) in cement concrete 1:2:4 typeB-l smooth finished, and reformingbenching as required, complete all as specified and directed. |
| 62 | Material and labour provding and laying 80mm thick factory made chamfered edge cement concrte paver block Of M30 grade with approved colour design 7 pattern as in footpath parks lawns drive ways or light traffic parking etc of required strength thickness & size shape made by table vibratory method using PU mould laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand compacting and proper embedding/ laying of inter locking palate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complete machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and no pigmentas, complete all as specified and directed. |
| 63 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and as directed by Engineer-in-charge. |
| 64 | Material and labour for Point wiring complete with 1.5 sqmm (nominal area) PVC insulated unsheathed multistranded copper condutor single core cable 1100 volts grade FRLSH ISI marked drawn through and including non metalic PVC conduit heavy duty , ISI marked of not less than 20 mm dia,Heavy duty thickness as per IS standards , concealed in wall, roof, etc, with all connected fittings including MODULAR WHITE COVER PLATE WITH FRAME - 1 module/ 2 module/3 module/4 module/6 module/8 module/12 module, etc., MODULAR METAL FLUSH BOX - 1 module/ 2 module/3 module/4 module/6 module/8 module/12 module, etc., and including FRLSH PVC insulated unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for the following:- Note:- modular switches, sockets, ceiling rose, regulators, etc shall be measured and paid separately. |
| 65 | One light / fan / Bell point controlled by one switch, complete all as specified and directed. |
| 66 | One socket outlet 5 Amps on the same board with other switches, complete all as specified and directed. |
| 67 | Supply & fix Modular switch one way 6A , 1 Module type single pole 240 volts of specified colour, complete all as specified and directed by the Engr-in-charge. |
| 68 | Supply & fix Socket, 6A- 2/3 pin combined 2 Module, complete all as specified and directed. |
| 69 | Supply and fixing in LED lamp 9 watt, retrofit, complete all as specified and directed. |
| 70 | Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings for LED lamps complete all as specified and directed. |
| 71 | Supply & fix LED tube light fitting (including LED tube) 1 X 20W 230 Volt surface and wall mounted LED batten, extruded aluminium housing provided with efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with all accessories internallyprewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size fixed on wall/ceiling, complete all as specified and directed. |
| 72 | Supply & fix connecting up testing and commissioning industrial corrosion proof IP 65 luminaire LED 35W suitable for security lighting made out of pressure die cast aluminium housing (including suitable GI tubing , brackets, clamps and lamps) complete with all accessories prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed. |
| 73 | Supply and fixing ceiling rose bakelite, 63.5mm 3 terminals with base plate ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 74 | Supply and fixing MCB SP 6 -32 Amps,10 KA, 'C' series 240 V ISI marked, complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 75 | Supply and fixing MCB SP 6 -32 Amps,10 KA, 'C' series 240 V ISI marked, complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
