|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil. |
| 3 | Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge. |
| 4 | M & L for Cement concrete using type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete all as specified and as directed by Engineer-in-charge. |
| 5 | M & L for Cement concrete using type B2 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete all as specified and as directed by Engineer-in-charge. |
| 6 | M & L for RCC type M-30 design mix (using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed in Engr-in-charge. |
| 7 | Formwork for sides of concrete foundations, footings, Flat or Square or rectangular fair finished surface,bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or tobatter all as specified and directed in Engr-in-charge. |
| 8 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed in Engr-in-charge. |
| 9 | M & L for Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed in Engr-in-charge. |
| 10 | M & L for Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed in Engr-in-charge. |
| 11 | S & F for Steel work in tubular pipes (vertical poles / trusses / purlins /Rafter) including welding etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed |
| 12 | S & F steel work of Fe-410-W (Gde- E-250) quality-B Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment complete all as specified and directed in Engr-in-charge. |
| 13 | S & F for 25mm Dia mild steel rag or lewis / HD bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30cm long complete all as specified and directed |
| 14 | M & L for Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described with one coat of primer with Red oxide and two coat of synthetic enamel paint all as specified and as directed by Engineer-in-charge. |
| 15 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.Note: Color of sheet (Color: Multani Mitti) decided by GE while execution period. |
| 16 | S&F for Plain, galvanised, mild steel sheeting 0.63mm thk, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with self tapping screws as specified and as directed. by Engineer-in-charge. |
| 17 | M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface. |
| 18 | M & L for 75mm thk Cement concrete type D1, 1:4:8 (20mm graded aggregate) in sub base of flooring/ hard standing finishing the surface even and fair complete all as specified and directed by Engr-in-charge. |
| 19 | M & L for 100mm thk Cement concrete type D1, 1:4:8 (20mm graded aggregate) in sub base of flooring/ hard standing finishing the surface even and fair complete all as specified and directed by Engr-in-charge. |
| 20 | M & L for 75mm thk Cement concrete type B-1, 1:2:4 (40mm graded aggregate) of flooring/ hard standing finishing the surface even and fair without using extra cement complete all as specified and directed by Engr-in-charge. |
| 21 | M & L for 100mm thk Cement concrete type B-1, 1:2:4 (20mm graded aggregate) of flooring/ hard standing finishing the surface even and fair with using extra cement, complete all as specified and directed by Engineer-in-charge. |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm using Hard/Dense Soil, complete all as specified and directed in Engr-in-charge. |
| 23 | Removing excavated material n exc 50m and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specfied |
| 24 | S & F for Framed work Fe-410-W(Gde-E-250) quality B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing incl sliding door bolt, steel handles..etc, complete, all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 25 | S & F for Framed work Fe-410-W(Gde-E-250) quality B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing incl sliding door bolt, steel handles..etc, complete, all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
