|
| 1 | Earthwork in excavation for foundation of structure as per drawings and technical specification, including setting out, construction of shoring and bracing, removal of sumps and other deleterious matter, dress of sides and bottom backfilling with approved material. |
| 2 | sand Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 |
| 3 | PCC Grade M-15 in open Foundation complete as per drawing and Technical specifications. |
| 4 | Brick masonry work in cement mortar 1:3 in parapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.4 |
| 5 | Flexible Apron-Construction of flexible apron 1 m thick comprising of loose stone boulder weighing not less than 40 kg beyond curtain wall. |
| 6 | Furnishing and Placing M-25 RCC in super-structure as per drawing and technical specification. |
| 7 | Providing and laying cement concrete wearing course M 30 including reinforcement complete as per drawing and technical specifications clauses 800and 1206.3 |
| 8 | Providing weep holes in brick masonry/ Plain/Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1:20 (V:H) towards drawing force. Complete as per drawing and technical specifcations. |
| 9 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. |
| 10 | Drainage Spouts complete as per drawing and tehnical specification. |
| 11 | Supply fitting and placing HYSD Bar reinforcement in super structure complete as per drawing and technical specifications. |
| 12 | Rainforced cement concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications clauses 800and 1211 |
| 13 | Running of 5HP pump for dewatering including arrangement of pump suction and delivery pipes and other accessories at site including cost of POL. |
| 14 | Dismantling of existing culvert (Brick work, RCC work, ) and including stacking of dismentaled materials as directed by Engineer-in-charge within a distance of 60 meters. |
| 15 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, compacting to meet requirement of the table 300-2 i/c royalty. |
| 16 | Construction of granular sub base by providing well graded material spreading in uniform layer with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel rollar to achieve the desired density,complete as per Technical Specification clause 401. |
| 17 | Providing, laying, spreading and compacting stone aggregates of specific sizes (45-63 mm) to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate,watering and compacting to the required density . WBM Grading-II as per Technical Spcification clause 405. |
| 18 | Providing,laying,spreading and compacting stone aggregates of specific sizes (22.4-53 mm) to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with smooth wheeI roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate,watering and compacting to the required density. WBM Grading-III as per Technical Spcification clause 405. |
| 19 | Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.60 kg/sqm using mechanical means as per Technical Specification Clause 502. |
| 20 | Providing and applying tack coat with Bitumen (VG-10) using emulsion distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503/5.2(As per MORD). |
| 21 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen @1.46 kg/sqm to required line,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying and rolling with three wheel 80-100 kN static rollar capacity finished to required level and grades to be followed by seal coat of Type-C as per Technical Specification Clause 508. |
| 22 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type-C with bitumen binder @ 0.65 kg/sqm including cost of bitumen as per Technical Specification Clause 510. |
| 23 | Brick Edging on both sides of roads of straight over burnt brick Class-150 Bricks/ 7.50 cm wide and 11.5 cm. deep laid with mud mortar finished to required template in proper alignment & including dressing & ramming the excavated earth as directed by E/I as per S.I. No. 765. |
| 24 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 303.1 |
| 25 | Providing and erecting Type-A \\"W\\" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70cm above road /ground level fixed on ISMC Series Chanel Vertical Post 150X75X5MM Spaced 2M Centre to Centre, 1.8M Hight, 1.1m below ground/road level all steel part and fitment to be galvanised by hot dip process all fitting to conform to IS 1367 and IS 1364 metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm 330m long complete as per MORTH Specification clause 810 and also including fixing in cement Concrete M-15 grade includin all material labour T&P etc. complete |
| 26 | Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 Please Enable Macros to View BoQ information |
