|
| 1 | Excavation in soil in hilly areas by mechanical/manual means, in all heights and depths, in all kinds of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damages to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiseling and wedging out of rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber, super-elevation and levels as shown on the drawings and as directed by the Engineer-in-Charge in conformity with the requirements of MoRD technical specification for Rural Road, Section. 300 & 1600 to achieve designed formation width including hauling and stacking of materials useful for construction at suitable sites safe manner and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means along with its leveling, fine dressing and carriage of machineries, tools, equipment’s and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. During the mobilization period, contractor should take the advanced x-sec in 15 m (fifteen metre) interval of whole road length in the presence of Engineer-in-Charge or his representative. In case the advanced x-section has been taken in the presence of Engineer-in-Charge representative, in that case the same has to be got approved from Engineer-in-Charge. The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account, filling of unevenness blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-Charge for smooth riding. The recovery for stones, whether useful or 752.74 (Seven Hundred Fifty Two point Seven Four) cubic metre at the rate of Rs 300/-only (Rupees three hundred only) per cubic meter amounting to Rs. 2, 25,822.00 only shall be effected on prorata basis in all circumstances. Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 2 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling/wedging out rocks (Where blasting is prohibited) as per drawings and MORD technical specification section 300 and 1600 and as per direction of the Engineer-in-Charge including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of materials upto any leads and lifts including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring, strutting, pumping and bailing out water (surface and sub soil water) upto any depth any quantum of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 3 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 with all leads as per MORD Technical Specification section 300 complete and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 4 | Loosening of the ground upto a level of 300 mm (three hundred millimetres) below the subgrade level, watered, graded with motor grader and compacted in layers to meet requirement of Tables 300. 1 and 300. 2 of MORD with three wheel 80-100 kN (eighty to one hundred kiloNewton) static roller for subgrade construction as per MORD Technical Specification section 300 as per direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 5 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with in all lifts and leads, transporting to site, spreading, grading by mechanical means to required slope and compacted with three wheel 80-100 (eighty to one hundred) kN (kiloNewton) static roller to meet requirement of Table 300.2 complete as per MORD technical Specification section 300 & 1600 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 6 | Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and MORD technical specifications section 1200, 1600 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 7 | Providing, laying and spreading Material for sub base course on a prepared sub grade, adding the designed quantity of cement to the spread Material, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base Quantity of cement assumed as 4% (Four Percent) of quantity of crushed rock by weight Cement Treated Crushed Rock or combination as per clause 403 and Table 400.4 as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 8 | Providing, laying and spreading Material for base course on a prepared sub grade, adding the designed quantity of cement to the spread Material, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base Quantity of cement assumed as 4% (Four Percent) of quantity of crushed rock by weight Cement Treated Crushed Rock or combination as per clause 403 and Table 400.4 as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 9 | Construction of Granular Sub-Base (Grade-1) by providing well graded materials, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 kN (Eighty-hundred kilonewton) static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 10 | Providing, laying, spreading and compacting by mechanical means crushed stone aggregate size 63mm to 45mm (sixty three millimetre to forty five millimetre) Grading-II consolidated thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 kN (eighty to one hundred kilonewton) static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2 mm (eleven point two millimetres) nominal size at the rate of 0.20 cum (zero point two zero cubic metres) per 10 sqm (ten square metres) and binding material at the rate of 0.06 cum (zero point zero six cubic metre) per 10 sqm (ten square metre) to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD technical specifications section 400 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 11 | Providing, laying, spreading and compacting by mechanical means of crushed stone aggregate size 53mm to 22.4mm (fifty three millimetre to twenty two point four millimetre) Grading-III [75mm (seventy five millimetre) consolidated thickness] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 kN (eight to one hundred kiloNewton) static roller in stages to proper grade and camber, including applying and brooming, stone screening type-B of size 11.2mm (eleven point two milimetre) nominal size at the rate of 0.18 cum (zero point one eight cubic metre) per ten square metres and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 12 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm (Zero point Eighty Five kilogramme per square meter) using mechanical means as per MORD Technical specification clause 502 including carriage of material within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST. |
| 13 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg/sqm (zero point two hundred seventy five kilogramme per square meter) on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD technical specification clause 503 including carriage of material within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST. |
| 14 | Providing, laying and rolling of close-graded Mix Seal Surfacing material of 20 mm (twenty millimetres) thickness composed of 11.2 mm to 0.09 mm (eleven point two millimetre to zero point zero nine millimetre) (Type-A) @ 0.27 cum per 10 sqm (at the rate of zero point twenty seven cubic metre per ten square meter) aggregates using penetration grade bitumen @ (at the rate of) i e binders content VG-10 (Viscosity Grade-Ten) @ 22 kg per 10sqm (at the rate of twenty two kilogram per ten square metre to required lines, grades and levels to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN (eight to ten kilo newton) static roller and finishing to required levels and grades as per MORD technical specifications section 500 including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 15 | Construction of plastic cell filled cement concrete pavement, thickness as per design, over a prepared sub base, with 53 (Fifty Three) grade Ordinary Portland Cement (OPC) or any other type as per Clause 1501.2.4 M30 (Thirty) Grade. Coarse and fine aggregates conforming to IS : 2386, maximum in a concrete mixer of not less then 0.2 cum (Zero point Two cubic metre) capacity and appropeiate weigh batcher using approved mix design(As per IRC 44:2088, laid in approved fixed side formwork (Steel channel, wedges, Steel plates including levelling the fomwork as per drawing), spreading the concrete with sholvels, rakes, conpacted using needle, screed an plate vibrators and finished in continuous operation, Concrete should have a slump of 30-50mm (Thirty-Fifty millimetre) with use of approved plasticizer if required. Formwork of plastic cells should be made of High Density Polyethylene (HDPE), sheets having thickness ranging from 0.20-0.22mm (Zero point Two Zero-Zero point Two Two millimetre) with sides 150mmx150mm (One Hundred Fifty into One Hundred Fifty millimetre) and height as fixed by engineer in charge. Cells should be stitched using thread, thus ensuring optimum joint strength. Joint strength should be a minimum of 2 Kilo Newton per metre. Heat welded cells should not be procured as they are not able to withstand the tension and often break when they are laid in the full width of the carriageway. Iron spikes of about 200mm (Two Hundred millimetre) long are to be used to keep the cell walls taut. Nylon thread or rope may be used to prevent collase of cells during placement of concrete. Iron spikes to be taken out for use in other place as soon as the concrete is in place. The subbase should be provided with concrete/stone block or brick on edge on either side of the carriageway protecting the subbase with full thickness of the concrete pavement for its confinement and protection. Curing of concrete slabs for 14 (Fourteen) days, curing compound ( where specified) and water finishing to lines and grades as per drawing and Technical Specification of cell filled Concrete Pavement Published by NRRDA. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 16 | Construction of Panel concrete, plain cement concretegrade M-30 (M-thirty) pavement, Each Panel 0.50m x 0.50m (zero decimal five zero metre into zero decimal five zero metre), 125 mm (one hundred twenty five millimetre) thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetre), mixed in a concrete mixer of not less than 0.2 cum (zero decimal two cubic metre) capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14 (fourteen) days. Curing compound (where specified) and water finishing to lines and grades as per drawing and MORD Technical Specification section 1500 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 17 | Providing and Laying of cold applied thermoplastic compound road marking paint 2.5mm (two decimal five millimetres) thick with reflectorizing glass beads at the rate 250 gram (two hundred fifty) gram per square metre area, thickness of 2.5mm (two point five millimetres) is exclusive of surface applied glass beads as per specification and with strips of 0.10 (Zero point one zero) metre width in centre lines or edge lines of the road as per MORTH specification Clause 803.4 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 18 | Providing and laying concrete mechanically mixed and vibrated mix 1:4:8 (one cement: four sand: eight graded crushed stone aggregate 40mm (Forty millimetre) nominal size) for plain/reinforced concrete in foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 & 1600 and curing complete including the cost of form work and hauling of material within all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 19 | Providing and laying concrete mechanically mixed and vibrated mix 1:4:8 (one cement: four sand: eight graded crushed stone aggregate 25mm (Twenty Five millimetre) nominal size) for plain/reinforced concrete in foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 & 1600 and curing complete including the cost of form work and hauling of material within all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 20 | Providing and laying 100mm dia (One Hundred millimetre diametre) PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, abutments, wing walls, return walls and retaining/breast walls extended through the full width of the structure with slope 1 (V):20 (H) (One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700, 1200 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 21 | Providing and laying concrete mechanically mixed and vibrated PCC M-10 (Ten) 1:3:6 nominal mix (one cement: three sand: six graded crushed stone aggregate 20 (twenty millimetre) nominal size) for plain/reinforced concrete in open foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 and 1600 and curing complete including the cost of form work and hauling of material within all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 22 | Providing and laying mechanically mixed and vibrated plain cement concrete grade M-15 (Fifteen) 1:2.5:5 (one cement: two point five sand: five graded crushed stone aggregate 40mm (Forty millimetre) nominal size) design mix with cement content not less than 275kg (two hundred seventy five kilogram) per cubic metre for plain/reinforced concrete in sub-structure and plinths or similar works complete as per drawings and MORD technical specifications section 800, 900, 1200 and 1600 and curing complete including the cost of form work as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 23 | Bedding for Pipe Type A (Concrete Cradle) Bedding: Laying concrete cradle bedding with M15 (fifteen) grade 1:2.5:5 nominal mix (one cement: two point five sand: five graded crushed stone aggregate 40 mm (forty millimetre) nominal size) design mix with cement content not less than 275kg (two hundred seventy five kilogram) per cubic metre for Cement Concrete complete as per drawings and technical specification section 1100 & Clause 1101.5 (i) and curing complete including the cost of form work as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 24 | Providing and laying flooring with rubble stone in cement mortar 1:3 (one cement : three coarse sand) laid over cement concrete bedding complete as per drawing and technical specification section 1300 as per directions of Engineer-in-Charge including curing and carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 25 | Fillling in foundation trenches with earth filling as per drawing and technical specification section 300 & clause 305.3.9 and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 26 | Providing and laying (to level or slope) 900mm dia (Nine Hundred millimetres) diameter reinforced cement concrete heavy duty non pressure pipes IS (Indian Standard) Class NP-3 (Non pressure- three) for culverts on first class bedding of Granular material in single row including providing and fixing collar with cement mortar 1:2 (One cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete bedding and masonry work in head walls and parapets as per drawing and MORD technical specifications section 1100 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 27 | Providing and laying (to level or slope) 300mm dia (Three Hundred millimetres) diameter cement concrete heavy duty non pressure pipes IS (Indian Standard) Class NP-3 (Non pressure- three) (burried conducts) for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2 (One cement : two sand) but excluding the cost of excavation, protection works, backfilling, concrete bedding and masonry work in head walls and parapets as per drawing and MORD technical specifications section 1100 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 28 | Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10% (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 29 | Providing and laying cement concrete wearing course M 30 (thirty) grade designed mix with cement contects not less than 430 kgs per cum (Four Hundred Thirty Kilogrammes per cubic metre) with 20 mm (Twenty millimetre) nominal size, including reinforcement and formwork complete as per drawing and MORD technical specifications section 800, 1400 and Clause 1404.2 and as per the direction of the Engineer-in-Charge including the cost of form work and carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 30 | Random rubble stone masonary & through and bond stone in cement mortar 1:6 (one cement : six sand) in sub-structure complete as per drawing and MORD technical specifications 2014 section 700, 1200 and 1600 and and as per direction of Engineer-in-Charge including the cost of scaffolding and carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 31 | Construction of dry rubble masonry & through and bond stone for retaining walls, breast walls, revetment walls and parapets etcetera for sub structure and super structure complete as per drawing and MORD technical specifications section 700, 1300 & 1600 and and as per direction of Engineer-in-Charge including the cost of scaffolding and carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 32 | Construction of unlined surface drains by manual/mechanical means of average cross-sectional area 0. 40 sqm (zero point four zero square metre) in all kinds of soil & ordinary rock to specified lines, grades, levels and dimensions. Excavated material to be used in embankment as per MORD Technical Specification Clause 307 and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 33 | Providing and fixing of typical PMGSY informatory sign board with logo as per MORD specification and drawing. Three MS plates of 1. 6 mm (one point six millimetre) thick top and middle plate duly welded with MS flat iron 25mmx5mm (twenty five millimetres x five millimetres) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm (Twenty five millimetres into twenty five millimetres into five millimetres). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. (Two Nos.) 75mmx75mm (seventy five millimetre x seventy five millimetres) of 12 SWG (twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 (M fifteen) nominal mix 1: 2.5: 5 (One cement: Two and half sand: Five graded or crushed stone aggregate 40mm (Forty millimetres) grade blocks of 450mmx450mmx600mm (four hundred fifty millimetres into four hundred fifty millimetres x six hundred millimetres), 600mm (six hundred millimetres) below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm (Forty seven millimetres x forty seven millimetres) of 12 SWG (Twelve Standard wire gauge) steel plate tube. All MS will be stove enamelled on both sides. Lettering and printing arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and MORD technical specifications section 1700 and Annexure 1700. 1 as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 34 | Providing and fixing of typical PMGSY informatory Logo as per MORD specifications and as per standard design of National Rural infrastructure agency development agency, of diamond size 600 x 600 mm (Six hundred into Six hundred millimetre), MS (Mild steel) plate of 1.6 mm (One point Six millimetre) thick, and board plate of 1100 x 300mm (One Thousand One Hundred into Three Hundred millimetre), MS plate of 1.6 mm (One point Six millimetre) thick and 2.4 m (Two point Four metre) deep 75mm x 75 mm x 6mm (seventy five millimetre x seventy five millimetres) of 12 SWG (twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 (Fifteen) grade blocks of 450mm x 450mm x 600mm (four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm (six hundred millimetre) below ground level size including fitting and painting, Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and MORD specification Section 1700. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 35 | Providing and fixing 5th (fifth) kilometre stone (Precast) Reinforced cement concrete M-15 (M-fifteen) grade of standard design as per IRC: 8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 36 | Providing and fixing Ordinary Kilometre Stone (Precast) Reinforced cement concrete M-15 (M-fifteen) grade of standard design as per IRC: 8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 37 | Providing and fixing 200m (two hundred metre) Stone (Precast) Reinforced cement concrete M-15 (M-fifteen) grade of standard design as per IRC: 26 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 38 | Providing and erecting direction and place identifications signs up to 0.9 sqm (Zero point Nine square metre) of semi reflective sign boards as per IRC:67 made of 2 mm (Two millimetre) thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm (Seventy millimetre) width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm (Forty Seven milimetre into Forty Seven millimetre) of 12 SWG (Twelve Standard Wire Gauge) Square tube of 3050 mm (Three Thousand Fifty millimetre) height duly strengthened by 25 mm x 5 mm (Twenty Five millimetre into Five millimetre) MS (Mild steel) flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 (Fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (Four Hundred Fifty millimetre into Four Hundred Fifty millimetre into Six Hundred millimetre), 600 mm (Six Hundred millimetre) below ground level as per approved drawing and Technical Specification Clause 1701 and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 39 | Providing and fixing of Semi-reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm (one point five millimetre) thick MS sheet duly stove enamelled paint in white colour in front and grey colour on back with red reflective border of 65 mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG (forty seven into forty seven millimetre of twelve Standard Wire Gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade (M- fifteen grade) cement concrete 450mm x 450 mm x 600 mm (four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm (six hundred millimetre) below ground level as per drawings and MORD Technical Specification section 1700 including painting angle iron post with primer and two post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. i) 600 mm (six hundred millimetre) equilateral triangle |
| 40 | 600 mm (six hundred millimetre) circular |
| 41 | Providing and fixing of Maintenance Board as per MORD specifications and drawing. MS Plates of 1.6 mm (One point Six millimetre) thick 900 mm x 1500 mm (Nine Hundred into One Thousand Five Hundred millimetre) welded over 6mm (Six millimetre) thick steel plates. 2 nos. (Two numbers) 75mm x 75 mm (seventy five millimetre x seventy five millimetres) of 12 SWG (twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 9Fifteen) grade blocks of 450mm x 450mm x 600mm(four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm (six hundred millimetre) below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing MORD Specification section 1700 including hauling of materials within all leads and lifts as per entire satisfaction and direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 42 | Guard stone on curve made of reinforced cement concrete M 15 (Fifteen) grade local stone of standard design as per IRC: 25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 43 | Providing and Fixing pavement marker (Cat eyes) made out of ABS 3 m (three metre) plastic of size 128x110x29.5 mm (one hundred twenty eight into one hundred ten into twenty nine decimal five millimetre) without nail having 50mm (fifty millimetres) stem of ABS The pavement marker shall be installed with epoxy ABS including carriage of materials and equipment with all mode of transportation and as per MORD specification section 1700 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 44 | Providing and fixing road side delineator of height 600mm (six hundred millimetre) made of MS pipe of size 50mm (fifty millimetre) of 1.6 SWG (One point SIx Standard Wire Gauge) having High intensity micro prismatic reflective sheeting confirming to ASTM type-XI upto 300mm (Three Hundred millimetre) length Balance 300mm (three hundred millimetre.) It shall be painted with synthetic enamel paint of alternate colour black & white strips. It shall be fixed with 30 x 30 x 30cm (thirty into thirty into thirty centimetre) block with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) as per specifications complete as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 45 | Supplying and installation of delineators road way indicators, hazard markers, object markers with tape, 80-100 cm (eighty to one hundred centimetre) high above ground level, painted black and white in 15 (Fifteen) centimetres wide strips, fitted with 80 x 100 mm (eighty into one hundred millimetre) rectangular or 75 mm (seventy five millimetre) diameter circular reflectorized panels at the top, buried or pressed into the ground and conforming to IRC:79 as per MORTH Specifications clause 806 & direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 46 | Providing and fixing road side Single Chevron markers of height 600mm (Six Hundred millimetre) made of MS pipe of size 50mm (fifty millimetre) of 1.6 SWG (one point six Standard Wire Gauge) having High intensity micro prismatic reflective sheeting confirming to ASTM type-XI upto 300mm (three hundred millimetre) length Balance 300mm (three hundred millimetre). It shall be painted with synthetic enamel paint of alternate colour black & white strips. It shall be fixed with 30 x 30 x 30cm (thirty into thirty into thirty centimetre) block with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) complete in all respect as per specifications complete as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 47 | Collection of materials for bio-engineering techniques that require live woody cuttings (brush layers, pallsades and fascines): Collection of hardwood cuttings from appropriate approved species, from sources within 1 km (One kilometre) of the road, including trimming the sterms and making the cuttings, and transporting while wrapped in damp material and the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 48 | Construction of live fascines made with hardwood cuttings: Planting unrooted hardwood cuttings (2.0 m (Two point zero metre) in length and 3.0 to 8.0 cm (Three point Zero to Eight point Zero cetimetre) in diameter) of appropriate approved species on slopes, including final preparation of cuttings, preparing lines, digging trenches to specified dimensions and forming fascines. and the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 49 | Road side tree planting containerzed tree and shurbs including potting, transplanting, compacting and mulching on slopes 30 (Thirty) degree to 60 (Sixty) degree pits size 30 cm (Thirty centimetre) diametre into 30cm (Thirty centimetre) depth. Providing and mixing compost with thre soil, Provisioning and applying of pesticides of required including labour abd transporation to the site and the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 50 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and M.O.R.D. technical specifications section 1700 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 51 | Construction Part |
| 52 | Note: The bidder should quote his % rate (+) or (-) only on the constrcution part amount and maintenece Part -II freezed |
| 53 | Routine Maintenance after completion of construction work as per items and condition of bid document that is 4 (i) of contract data to general condition of contract and technical specification of Ministry of Rural Development roads January, 2014 (Two thousand fourteen) for rural roads including hauling/carriage of all labour equipment and materials to various location through all modes of transportation all leads, lifts to the entire satisfaction of the Engineer-in-Charge. |
| 54 | For 1st year |
| 55 | For 2nd year |
| 56 | For 3rd Year |
| 57 | For 4th Year |
| 58 | For 5th Year Please Enable Macros to View BoQ information |
