|
| 1 | Supply, installation, connecting, commissioning and replacement of LT panel with CPRI approved main factory fabricated LT distribution panel board, outdoor type, both side openable including loking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anticorrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4Nos insulated bus bar each made of high conductivity aluminium suitable for 1200 Amps, prewired with suitable size of copper cable/insulated copper strip including PCC work height from ground level .9 mtrs and Iron angle work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following including taking down old LT panel:-(A) INCOMING (i) ACB, 4 Pole,415V, 50HZ 630 Amps 65 KA Manual Drawout type with microprocessor release -01 Nos(B) OUTGOING (i) MCCB adjustable thermal and magnetic of 400 Amps, 4pole, 415 Volts, 36 KA, with rotary mechanism - 04 Nos (ii) MCCB adjustable thermal and magnetic of 250 Amps, 4pole, 415 Volts, 36 KA , with rotary mechanism - 04 Nos iii) MCCB adjustable thermal and magnetic of 63 Amps, 4pole, 415 Volts, 16 KA , with rotary macanism - 02 Nos (iv) Blank space for MCCBs of same capacity - 02 Nos(v) Digital Multifuction meter with selector switch and three current transformers of suitable ratio and capacity -01 Set(vi) Three phase Amp meter Accuracy Class 1.0, 0.5 Inbuilt selector switch for 3 phase meters CT/PT site programmable Frequency parameter available in 3Ph - 8 Nos(vii) LED Type Phase indicator lamps for three phases set of three -08 Nos(viii) Selector switch - 08 Nos(ix) Busbar chamber having insulated aluminium busbar, each suitable for 1200 Amps for three phases and neutral -01 Set |
| 2 | Supply, installation, connecting, commissioning and replacement of LT panel with CPRI approved main factory fabricated LT distribution panel board, outdoor type, both side openable including loking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anticorrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4Nos insulated bus bar each made of high conductivity aluminium suitable for 720 Amps, prewired with suitable size of copper cable/insulated copper strip including PCC work height from ground level .9 mtrs and Iron angle work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following including taking down old LT panel:-(A) INCOMING (i) MCCB, 4 Pole,415V, 50HZ 400 Amps 36 KA adjustable thermal and magnetic with rotary mechanism-01 Nos(B) OUTGOING (i) MCCB adjustable thermal and magnetic of 250 Amps, 4pole, 415 Volts, 36 KA, with rotary mechanism - 02 Nos (ii) MCCB adjustable thermal and magnetic of 200 Amps, 4pole, 415 Volts, 16 KA , with rotary mechanism - 02 Nos (iii) MCCB adjustable thermal and magnetic of 160 Amps, 4pole, 415 Volts, 16 KA , with rotary mechanism - 02 Nos (iv) MCCB adjustable thermal and magnetic of 100 Amps, 4pole, 415 Volts, 1 KA - 01 Nos (v) Three pole power contractor MNX-12 -01 Nos (vi) Three pole power contractor MNX-12 -01 Nos -02 Nos (vii) Three pole power contractor MNX-12 -01 Nos -02 Nos (viii) Change over switch 400 Amps 4 pole 415 volt with handle - 01 Nos (ix) MCB SPN 'C' Series,240V/415V,50Hz,32 amps 10 KA-01 Nos(x) Power factor Controller - 01 Nos (xi) Blank space for MCCBs of same capacity - 01 Nos(xii) Digital Multifuction meter with selector switch and three current transformers of suitable ratio and capacity -01 Set(xiii) LED Type Phase indicator lamps for three phases set of three -08 Nos(Xiv) Selector switch - 08 Nos(xii) Busbar chamber having insulated aluminium busbar, each suitable for 720 Amps for three phases and neutral -01 Set |
| 3 | Supply, installation, connecting, commissioning and replacement of LT panel with CPRI approved main factory fabricated LT distribution panel board, outdoor type, both side openable including loking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anticorrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4Nos insulated bus bar each made of high conductivity aluminium suitable for 225 Amps, prewired with suitable size of copper cable/insulated copper strip including PCC work height from ground level .9 mtrs and Iron angle work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following including taking down old LT panel:-(A) INCOMING (i) MCCB, 4 Pole, 415V, 50HZ,125 Amps 25KA micro processor -01 No. (B) OUTGOING (i) MCCB, 4 Pole,415V, 50HZ 63 Amps 16 KA adjustable thermal and magnetic -01 Nos(ii) MCB, SPN 'C' Series,240V, 50HZ 63 Amps 10KA -02 Nos (iii) MCB, SPN 'C' Series,240V, 50HZ 32 Amps 10KA -01 Nos (iv) Digital Multifuction meter with selector switch and three current transformers of suitable ratio and capacity -01 Set(v) LED Type Phase indicator lamps for three phases set of three - 01 set (vi) Busbar chamber having insulated aluminium busbar, each suitable for 720 Amps for three phases and neutral -01 Set (vii) Spare space for MCCB of same capacity -01 Nos Please Enable Macros to View BoQ information |
| 4 | Supply, installation, connecting, commissioning and replacement of LT panel with CPRI approved main factory fabricated LT distribution panel board, outdoor type, both side openable including loking arrangement with sliding door bolt , cubical type, 3 phase, 4 wire, 415V, factory made free standing, floor mounting, dust and vermin proof, cubical type, fabricated from 3.15 mm thick MS sheet with anticorrosive coating and finally epoxy polyster powder coating of flint grey shade fully compartmentalised design with 4Nos insulated bus bar each made of high conductivity aluminium suitable for 225 Amps, prewired with suitable size of copper cable/insulated copper strip including PCC work height from ground level .9 mtrs and Iron angle work for fixing arragement at site suitable earth strips conforming to IS, cable glands, lugs etc suitable for and comprising of the following including taking down old LT panel:-(A) INCOMING (i) MCCB, 4 Pole, 415V, 50HZ,125 Amps 25KA micro processor -01 No. (B) OUTGOING (i) MCCB, 4 Pole,415V, 50HZ 63 Amps 16 KA adjustable thermal and magnetic -01 Nos(ii) MCB, SPN 'C' Series,240V, 50HZ 63 Amps 10KA -02 Nos (iii) MCB, SPN 'C' Series,240V, 50HZ 32 Amps 10KA -01 Nos (iv) Digital Multifuction meter with selector switch and three current transformers of suitable ratio and capacity -01 Set(v) LED Type Phase indicator lamps for three phases set of three - 01 set (vi) Busbar chamber having insulated aluminium busbar, each suitable for 720 Amps for three phases and neutral -01 Set (vii) Spare space for MCCB of same capacity -01 Nos Please Enable Macros to View BoQ information |
