|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 2 | Group C |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 4 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 5 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 6 | Replacement of following sizes of medium class PVC Casing Capping along with accessories in surface as required. |
| 7 | 20 mm x 12 mm |
| 8 | 25 mm x 16 mm |
| 9 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 10 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 11 | 4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire |
| 12 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ PVC casing caping as required. |
| 13 | 3 x 1.5 sq. mm. |
| 14 | 4 x 1.5 sq. mm. |
| 15 | 5 x 1.5 sq. mm. |
| 16 | 6 x 1.5 sq. mm. |
| 17 | 3 x 4 sq. mm. |
| 18 | 6 x 4 sq. mm. |
| 19 | 3 x 6 sq. mm. |
| 20 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 21 | 5/6 amps switch |
| 22 | 15/16 amp switch |
| 23 | 3 pin 5/6 amp socket outlet |
| 24 | 6 pin 15/16 amp socket outlet |
| 25 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. |
| 26 | 3 Module (100mmX75mm) |
| 27 | 8 Module (125mmX125mm) |
| 28 | 12 Module (200mmX150mm) |
| 29 | Supplying and fixing musical/Ding Dong call bell suitable for D.C./A.C. single phase, 230 volts, complete as required. |
| 30 | Supplying and fixing Two Module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 31 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 32 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 33 | Supplying and fixing 3 pin 5 Amp Ceiling Rose on the existing junction box/wooden block including connection etc. as required. |
| 34 | Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 35 | Supplying and fixing following way, Horizontal/Vertical type SPN / TPN, sheet steel, MCB distribution board, 240/ 415 volts, on surface/ recess, complete with metal door, tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) |
| 36 | 8 Way SPN Double Door |
| 37 | 12 Way SPN Double Door |
| 38 | 4 Way Horizontal TPN (4+12) Double Door |
| 39 | Replacement of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision of 100 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (Without MCB's but with MCCB) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required) |
| 40 | 4 Way VTPN Double Door i/c Three Pole 100 A MCCB (18KA) as incomer (DB & MCCB should be from approved make as per approved make list or Equivalent Similar Superior Make) |
| 41 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 42 | Single pole. |
| 43 | Single pole and Neutral. |
| 44 | Triple pole |
| 45 | Triple pole and Neutral |
| 46 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts \\"C\\" curve SPN MCB complete with connections, testing and commissioning etc. as required. |
| 47 | Replacement of following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 48 | 200 Amp rating,Three pole, MCCB with variable Thermal-Magnetic Release, (Release Range 160-200A) breaking capacity 25KA at 415V, 50HZ, AC Supply and Conforms to IS/IEC 60947-2 (Make and Model, M/s L&T DN1-250C or equivalent similar superior make) with (Ics = 100% Icu) |
| 49 | 100 Amp rating, Three pole, MCCB with variable Thermal-Magnetic Release, (Release Range 25-32,50-63,80-100A) breaking capacity 25KA at 415V, 50HZ, AC Supply and Conforms to IS/IEC 60947-2 (Make and Model ,M/s L&T DN0-100C or equivalent similar superior make) with (Ics = 100% Icu) |
| 50 | Replacement of surface/ recess mounting, vertical type, 415 volts, sheet steel enclosure for following rating of 3P/ 4P MCCBs complete with in-built neutral Link for TPN system, interconnections, powder painted including earthing etc. as required. (But without MCCB.) |
| 51 | Suitable up to 125A MCCBs, 36kA |
| 52 | Supplying of one number of following sizes XLPE insulated PVC inner sheathed Aluminium conductor Armoured cable of 650/1100V grade conforming to IS: 7098(Part 1) 1988 WITH UPTO DATE AMENDMENTS , etc as required at site (ISI marked). |
| 53 | 2 x 6 Sq.mm. Aluminium Conductor Armoured Cable. |
| 54 | 2 x 16 Sq.mm. Aluminium Conductor Armoured Cable. |
| 55 | 4 x 16 Sq.mm. Aluminium Conductor Armoured Cable. |
| 56 | 3½ x 35 Sq.mm. Aluminium Conductor Armoured Cable. |
| 57 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 58 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 59 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe or fixing on wall surface with suitable clamps or in the existing masonry open duct etc. as required.. |
| 60 | Upto 35 sq. mm |
| 61 | Replacement of 2 x 2.5 sqmm copper conductor round flexible multistrand unarmoured pvc insulated and PVC sheathed copper cable in air for electrical connection of the existing street light fitting etc.as reqd. cable. |
| 62 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 63 | 2 X 6 sq. mm (19mm) |
| 64 | 4 X 16 sq. mm (28mm) |
| 65 | Replacement of 8 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface / recessed conduit /submain wiring /cable as required. |
| 66 | Supplying Installation, testing and commissioning of following pre-wired, surface / recess mounted LED light fixture of all types, complete with all accessories, with integrated electronic driver , and lamps etc., suitable for operation on 230 Volts, 50Hz, Single Phase, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 67 | Surface and wall mounted Type, 20 Watts (+/- 2 Watts), 1200mm (Nominal dimension) energy efficient linear box LED PVC batten light having 6500K colour temp., minimum 1900 Lumens, 95 Lumen/watt efficacy along with all accessories (Make Syska, Havells or similar superior model of preferred make) |
| 68 | SITC of following rating Heavy duty Exhaust fan with Metallic body and louvers suitable for operation on 230V, 50Hz, single-phase AC supply ,including fixing the same on the existing opening making interconnection with 2x1.5 sqmm cu. Conductor FR PVC cable etc as reqd at site. ( M/s Havells TurboForce or Equivalent model of Usha, Bajaj, Khaitan or other similar superior make ). |
| 69 | 300 mm Sweep, 900 RPM Heavy duty Exhaust fan suitable for Single phase supply. |
| 70 | 450 mm Sweep, 900 RPM Heavy duty Exhaust fan suitable for Single phase supply. |
| 71 | SITC of 300 mm sweep fresh air fan With metallic body and net including fixing the same on the existing opening making interconnection with 2x1.5 sqmm cu. Conductor FR PVC cable etc as reqd at site. ( M/s Havells Ventilair-DS or Equivalent model of Usha, Bajaj, Khaitan or other similar superior make ). |
| 72 | SITC of 250 mm sweep Ventilating fan with plastic body and louvers including fixing the same on the existing opening making interconnection with 2x1.5 sqmm cu. Conductor FR PVC cable etc as required at site. (M/s HAVELLS model Venti Air-DX White or similar superior make, Other preferred makes Crompton Greaves/ Usha/ Khaitan/ Bajaj/ Orient) |
| 73 | Replacement of existing faulty MV switchgear suitable for operation, on Three Phase 415/500 V,50Hz, AC system, including mounting on wall /existing frame/ cubicle with suitable clamps/fasteners, drilling holes as necessary, making all incoming/outgoing interconnections, earthing the enclosure, testing, and dismantling/removal of the defective unit, complete as required. |
| 74 | SITC of 63 amps four pole ON load change over switch in steel enclosure with front handle operation. |
| 75 | SITC of 63 amps four pole ON load change over switch open execution type with front handle operation. |
| 76 | Providing and fixing M.S. Angle iron Stand /bracket for installation of Electrical equipment, fixture and switchgear, fabricated out of the followings , including cutting, welding, painting and fixing the same on wall /floor, making good the damage, minor civil work etc as reqd at site. |
| 77 | 40x40x5mm angle. |
| 78 | Supplying and fixing of 3 Phase 4 Wire 10-60 Amps. range LCD type Energy meter having class 1.0 accuracy i/c required wiring work in PVC conduit, on suitable size of the wooden board, complete with connections, testing & commissioning etc. as required.(Make:- M/s. HPL/L&T/Havells/ Secure make). |
| 79 | Supply, installation, testing, and commissioning of LED flood light luminaires of following specified nominal wattage, housed in a robust die-cast Aluminium body with IP66 protection, toughened glass front cover, and equipped with high-efficiency polycarbonate lenses for optimal light distribution. The luminaire shall include a high-performance electronic driver and all associated accessories, suitable for operation on 230V, 50Hz, single-phase AC supply. The scope includes provision of appropriate mounting hardware, installation on existing suitably sized brackets, electrical interconnections, testing, and commissioning at site as required.(Note :For illuminating Signboard and Yard area) |
| 80 | 70 Watt. Pure white, LED flood light luminaire .(Havells Make and model : JETAADORNFLS70WLED757SSYMTOTGV2 /SYSKA / Wipro / Crompton / Bajaj / Osram or other similar superior make and model) |
| 81 | 200 Watt. Pure white, LED flood light luminaire .(Havells Make and model : JETAADORNFLS200WLED757SSYMTOTGV3 /SYSKA / Wipro / Crompton / Bajaj / Osram or other similar superior make and model) |
| 82 | Supply, installation, testing, and commissioning of one number Pole mounting type LED street light luminaires of following specified nominal wattage, housed in a die-cast Aluminium casing/body, IP66 protection, with lens-embedded polycarbonate cover in front, built -in electronic driver and complete with all accessories suitable for operation on 230V, 50Hz, single-phase AC supply, including installation on existing bracket arm fixed on pole up to 9 metres height, making necessary electrical interconnections, testing, and commissioning as required at site. |
| 83 | 60Watt LED street light luminaire with Side entry (Havells Make and model : ENDURASUNDOWNSL60WLED765PASYBOTG /SYSKA / Wipro / Crompton / Bajaj / Osram or other similar superior make and model) |
| 84 | Replacement of one no, 250x200x100mm (nominal inner dimensions /size) all weather, Poly carbonate , SMC junction Box, with IP54 protection, side hinged openable door and suitable for outdoor installation complete with DIN rail, & pole clamps , fixing the same on the existing pole/wall making interconnection etc. complete as required. (with out MCB ) |
| 85 | Supplying and fixing of G.I. bracket arm for mounting LED street light fittings, fabricated from 32mm dia medium-class G.I. pipe of 1 metre length, machine-bent to suitable curvature, complete with appropriately sized reducers, M.S. angle iron clamps, and painted with two coats of red oxide primer followed by two coats of aluminium paint, including numbering, all complete as required. |
| 86 | Supplying and laying of 3-core, 1.5 sqmm copper conductor, round flexible, multistrand, unarmoured PVC insulated and PVC sheathed cable for electrical connection of existing street light fittings, laid on surface of wall or in open air, including necessary fixing accessories, all complete as required. |
| 87 | Making arrangement and lifting out/ removal of existing faulty /defective /burnt old submersible pump set upto 5HP rating from the bore ( approx.. 150 feet deep) including dismantling and removal of water column pipe along with all accessories ,wires and cable complete in all respect as required at site.(Note: For the purpose of carrying out the work All T&P will have to be arranged by the agency ) |
| 88 | Making Arrangement and lowering/ fixing of Submersible pump set upto 5 HP rating in the bore ( approx.. 150 feet deep) along with existing water column pipe, Power cable, making interconnection and plumbing work complete including testing commissioning etc. as reqd. at site. |
| 89 | Supplying for replacement of 3.0 HP, 23 stage, water lifting Submersible motor pump set suitable for operation on Three phase, 415 volts, 50 Hz. A/C Supply and capable of discharge (100-0) Ltrs/min against the head of 71 - 140 mtrs and suitable for discharge connection of 32 mm. etc. complete as required.(Make : M/s. KSB make Model (CORA 4C + UMA I 100)/ (08-4C/23G/3HP/23STG/2.2/22\\") or similar superior make). |
| 90 | Supplying for replacement of 4.0 HP, 25 stage, water lifting Submersible motor pump set suitable for operation on Three phase, 415 volts, 50 Hz. A/C Supply and capable of discharge of 100 Ltrs/min - 33 Ltrs/min against the head of 78 - 148 mtrs and suitable for discharge connection of 38 mm. etc. complete as required.( Make : M/s. KSB make Model 10-4C/25/4HP/ 25 STG UMAI 100-3.0/22 or similar superior make). |
| 91 | Supplying for replacement of 5.0 HP,Monoblock pump set suitable for operation on Three phase, 415 volts, 50 Hz. A/C Supply and capable of discharge of 9.0 - 4.0 ltrs./second against the head of 4 - 40 mtrs. and suitable for discharge connection of 32 mm. etc. complete as required.(Make : M/s. Kirloskar make model no. KDI-538+ or similar superior make). |
| 92 | Supplying of DOL (Direct‑On‑Line) motor‑starter pump control panel suitable for operating 3.0/4.0/5.0 HP, 415 Volts, three‑phase submersible pump set/monoblock pump, comprising suitably rated contactor, thermal overload relay, ON/OFF push‑button assembly, R‑Y‑B phase indicators, MCB/isolator, internal wiring, connection plate, enclosure of suitable gauge sheet steel with powder coating, earthing studs and all accessories, complete as required. (Make: M/s. BCH Electric Limited model Shakti WP or S. S. make). |
| 93 | Providing 32 mm dia. medium‑class UPVC water column pipe with coupler/Socket for existing submersible pump set, including Supplying along with all accessories required for proper connection with the existing rising main and pump, complete as required. |
| 94 | Supplying of 12 mm diameter polypropylene (PP) rope of approved quality for holding and securing the existing submersible pump set during lowering, lifting and operation, including cutting to required lengths complete as required. |
| 95 | Supply,Installation, Testing and Commissioning of Maintenance free Chemical earth station as per latest RDSO/BSNL specifications consisting of:- (a) Copper bonded steel Electrode of 3.0 Mtrs. long 17 mm. dia. with copper bonded thickness of minimum 250 microns and UL listed and marked→01 No. (b) Earth enhancing compound minimum 30-35 Kg. of RDSO/BSNL approved brandsuplied in sealed bags of minimum 10 Kg. (Make:- RDSO/BSNL approved). (c) Providing & weld ( Exothermic) a Copper bus bar of minimum size 6mmx25mmx150mm on top of earth electrode.(d) Providing & making inspection chamber (DMC) pit cover of minimum size of 425mmx250mm etc complete as required. |
| 96 | Supplying and laying 35 sqmm. copper conductor flexible multistrand unarmoured pvc insulated and PVC sheathed copper cable on surface/air i/c suitable size of lugs , nut bolt etc. for earth connections etc. complete as reqd. |
| 97 | Earthing with GI earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 98 | Providing and fixing 25 mm X 5 mm GI strip in 40 mm. dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 99 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 100 | Providing & Fixing Copper Main Equi-potential earth busbar (MEEB) of minimum size 6mmx25mmx300mm fixing on wall with two no. suitable insulator i/c suitable size nut bolt, spring waser and marking & sign writing as per the direction of Engineer-in-charge etc complete as required at site. |
| 101 | Testing of the existing earthing system installed at the BTS or Exchange site including watering the existing earthing system with salt from the available watering source at site, arranging the earth testing meter, arrangement of vehicle for movement from site to site, necessary skilled work force to complete the job and preparing a testing report for tested results as per the instruction of the Engineer-in-Charge etc. complete as required. (Note:-This item will be paid if only earth measurement is done and no work of earthing is executed at site). |
| 102 | Supplying and Fixing of following size medium class heavy duty PVC Pipe with all accessories bends, union, sockeys, clamps etc in surface of wall / recess / road crossing complete as required |
| 103 | (a) 32 mm dia Please Enable Macros to View BoQ information |