|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR 2.8 |
| 2 | All kinds of soil DSR 2.8.1 |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : DSR 2.10 |
| 4 | All kinds of soil DSR 2.10.1 |
| 5 | Pipes, cables etc, not exceeding 80 mm dia. DSR 2.10.1.1 |
| 6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre DSR 2.10.1.2 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : DSR 4.1 |
| 8 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) DSR 4.1.4 |
| 9 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) DSR 4.1.10 |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR 6.1 |
| 11 | Cement mortar 1:6 (1 cement : 6 coarse sand DSR 6.1.2 |
| 12 | 12 mm cement plaster of mix : DSR 13.4 |
| 13 | 1:4 (1 cement: 4 coarse sand) L.S QTY DSR 13.4.1 |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 15 | 20 mm nominal bore DSR 18.17.1A |
| 16 | Cutting holes up to 30x30 cm in walls including making good the same DSR 18.76 |
| 17 | With common burnt clay F.P.S. (non modular) brick DSR 18.76.1 |
| 18 | Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc. DSR 18.12 |
| 19 | 20 mm dia nominal bore DSR 18.12.2 |
| 20 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : DSR 18.59 |
| 21 | 100mm Dia DSR 18.59.3 |
| 22 | Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : DSR 18.31 |
| 23 | 100 mm diameter DSR 18.31.2 |
| 24 | Class II |
| 25 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 10 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation. |
| 26 | 75 mm |
| 27 | 110 mm |
| 28 | Proving and fixing of isrrigation aluminium hydrant of MS clamp for 75/90mm pipe ,MS socket 50mm with plug ,GI Nipple 50mm upto 1mtr length with GI fitting complete in all respacts |
| 29 | Detection of leakage in Hydrant/sprinkler pipe line Including cost of excavation and tracing of leakage point and repair of leakage etc. to entire satisfication of EIC |
| 30 | Proving and Fixing of Open Well Horizontal submersible pump set 10HP cap model KOS-1040+ or equivalent complete in all respact as per entire satisfication of EIC make as per approved list |
| 31 | Proving and fixing of Electrical Panel for 10HP submersible pump set complete in all respact as per entire satisfication of EIC make as per approved list |
| 32 | Proving and fixing of 3C -6 sqmm submersible Flat cable complete in all respact as per entire satisfication of EIC make as per approved list |
| 33 | Proving and fixing of Brass Sprinkler Gun 25mm inlet size complete in all respact as per entire satisfication of EIC |
| 34 | Proving and fixing of GI opener key having size 32mm i/c reducer etc. complete in all respact as per entire satisfication of EIC |
| 35 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 36 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm Please Enable Macros to View BoQ information |
