|
| 1 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge.(DSR No.14.82) |
| 2 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. .(DSR No.15.52) |
| 3 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.(DSR No.14.79) |
| 4 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) .(DSR No. 14.1.1) |
| 5 | Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. .(DSR No. 14.13) |
| 6 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase.(DSR No. 12.21.1) |
| 7 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.(DSR No. 12.22) |
| 8 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps with C.P. brass including of fitting complete.(DSR No. 17.5.1) |
| 9 | Providing and fixing of factory made 30mm thick PVC flush door shutters made out of (RajshreePlasticwood pre-lamindated both side decorated) 5mm thick reigid PVC foam sheet frame shall be made out of 19x19mm MS square tube of 19 gauge and inside 20mm thick PVC hollow profile filed along tube frame, 5mm rigid PVC foam sheet fixed and pressed mechanically on both side of frame with approved quality of adhesive all the edges of door shutter shall have 5mm thick rigid PVC foamshet lipping in double layer, item includes powder coated MS buff hignges 100x58x1.19 mm fixed with bright finish cr. Black enamed 40mm 120 mm mild sheet crewas as per required to entire specifications of Engineer-in-charge Decorative finish (both side wood granined finish) |
| 10 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) .(DSR No. 14.5.1) |
| 11 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosivebitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore .(DSR No. 18.11.1) |
| 12 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore .(DSR No. 18.18.1) |
| 13 | Providing and fixing pillar cock (Brass) of approved quality High or low pressure complete 15mm nominal bore |
| 14 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore .(DSR No. 18.21.2.1) |
| 15 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter .(DSR No. 12.41.2) |
| 16 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm bend .(DSR No. 12.42.5.2:) |
| 17 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity – White .(DSR No. 17.18.1) |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. .(DSR No. 8.31) |
| 19 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps .(DSR No. 17.7.3) |
| 20 | Replacement by providing and fixing in place of old defective/unserviceable hand dryers including cost of wiring, nut bolt etc. complete in all respects |
| 21 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. .(DSR No. 18.48A) |
| 22 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. .(DSR No. 11.56.1) |
| 23 | Replacement by providing and fixing in place of old/defective 20 Watt LED tube light 4 feet long of reputed make: Bajaj/Phillips/ Havells/Corpmton |
| 24 | Replacement by providing and fixing of napkin paper type machine high impact ABS easy to install easy to load, no wastage as every last towel is used of reputed make to the entire satisfaction of EIC. |
| 25 | Providing and fixing of 8mm dia CP/SS jet with flexible tube upto 1 mtr long with SS Triangular plate to European Type WC of reputed make to the entire satisfaction of EIC |
| 26 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests .(DSR No. 17.1.1) |
| 27 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : .(DSR No. 17.2) |
| 28 | Replacement by providing and fixing in place of old/defective/unserviceable sanitary pad vending machine (Manual) suitable for dispensing pad after inserting Rs.5/- (only) including cost of heavy duty lock, latest SwacchhSurvekshan logo, wiring, nut bolt etc. Make DNR Health Care HLL Lifecare ltd. Complete as per entire satisfaction of EIC. |
| 29 | Replacement by providing and fixing in place of old/defective /unserviceable sanitary pad incinerator machine including cost of wiring, nut, bolt etc. complete as per entire satisfaction of EIC |
| 30 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore.(DSR No. 18.17) |
| 31 | Providing and fixing brass bib cock of approved quality : 18.15.1 15 mm nominal bore .(DSR No. 18.15.1) |
| 32 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 17.28.1.1 32 mm dia .(DSR No. 17.28.1) |
| 33 | Providing and fixing of laminated sun sign Board Material for indication of various sign board for SwachhSurvekshan, Toilet I.D. etc. in toilet block of size 36”x30” |
| 34 | Providing and fixing o laminated sun sigh board material size 8”x12” (Google Map), (Sanitary Napkin Machine), QR code (Male/Female, Differentially abled, Child Friendly |
| 35 | Note :- Less against old material L.S. Please Enable Macros to View BoQ information |
