|
| 1 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (DSR No.15.25) |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm (DSR no.15.23.1) |
| 3 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR item no.15.26 |
| 4 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead. DSR item no.15.27 |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) DSR item no.15.2.2 |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below DSR No. 15.12.1 |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. DSR item no.2.8.1 |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. DSR No.2.25 |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) DSR item No.6.1.2 |
| 10 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR item no. 13.4.1 |
| 11 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. DSR No. 14.82 |
| 12 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. DSR No. 15.52 |
| 13 | Dismantling Wash hand basin with existing CI brackets & fitting of all sizes including handing over the material to department all complete as per directions of Engineer-in-Charge. (NSI) |
| 14 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge DSR No. 14.79 |
| 15 | Providing and fixing soil, waste and vent pipes : 100mm dia Sand cast iron S&S pipe as per IS: 1729 DSR item no. 17.35.1.1 |
| 16 | 75 mm diameter Sand cast iron S&S pipe as per IS: 1729 DSR item no. 17.35.2.1 |
| 17 | Providing and fixing drip seal joint for HCI pipes of size 100mm including the cost of yarn, caulking complete in all respects (NSI) |
| 18 | Providing and fixing drip seal joint for HCI pipes of size 75mm including the cost of yarn, caulking complete in all respects |
| 19 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR No.18.11:15 mm dia nominal bore DSR No.18.11.1 |
| 20 | 20 mm dia nominal bore DSR No.18.11.2 |
| 21 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore (DSR No.18.46.1) |
| 22 | 20 mm nominal bore (DSR No.18.46.2) |
| 23 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR No.18.17 20 mm nominal bore (DSR No.18.17.1A) |
| 24 | 32 mm nominal bore (DSR No.18.17.2) |
| 25 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore DSR No. 18.18.2 |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR No.8.31) |
| 27 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (DSR No.11.56) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (DSR No.11.56.1 |
| 28 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete [Anti-Skid Floor Tiles]. Size of Tile 500x500 mm (DSR No.14.41.1) |
| 29 | Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).[For Barrier Free Toilet Block] Note: Guiding block 300mm away from sliding door Dark shade pigment using ordinary cement (DSR No.11.20.3) |
| 30 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay F.P.S.(non modular) brick tile of class designation 10 (DSR No.12.16.1) |
| 31 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase (DSR No. 12.21.1) |
| 32 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR No.12.22) |
| 33 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (DSR No.13.47.1) |
| 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR No.13.80) |
| 35 | \\"Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : With F.P.S. brick tiles (As per DSR I. No. 14.18.1)\\" |
| 36 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) (DSR No.14.45.1) |
| 37 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.(DSR : 13.91) |
| 38 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR item No. 19.30.3.1 |
| 39 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR No. 19.4.1.1 |
| 40 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter DSR No. 19.21.1 |
| 41 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm internal dimensions DSR item no. 19.19.1.1 |
| 42 | Providing and fixing aluminium work in doors, windows, partitions etc - Fixed - Anodised aluminium work(DSR No.21.1.1.1) |
| 43 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) (DSR No. 21.3.1 ) |
| 44 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm (DSR No. 9.97.3) |
| 45 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (DSR No. 9.100.1) |
| 46 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm (DSR No.9.96.1) |
| 47 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper ( DSR No. 9.101.2) |
| 48 | Providing and fixing grabe rail of stainless steel pipe 1-1/4\\" and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00 m spacing including cutting and making good the walls complete as per direction of Engineer-in-charge.(NSI) |
| 49 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap ( DSR No. 17.7.4) |
| 50 | Providing and fixing C.P. Bras angular stop cock of 15 mm nominal bore (NSI) |
| 51 | Providing and fixing white vitreous china ceramic flat back half stall flow sensor urinal wall mounted of size 580x380x350mm with all fitting required, standaed size CP Brass flush pipe,with automatic flushing system speaders, auto closing ahle cock, CP dome waste 32mm, GI waste pipe 32mm, clamps (all CP Bras) including painting of fitting complete in all respect (NSI) |
| 52 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (NSI) |
| 53 | Providing and fixing urinal partition 10mm thick High Stainless Steel of size 1.5 x 2.75 fixed in postion with clams holding the Steel Partition All exposed edges to be grinded with smooth finish to the entire satification of engineer-in-charge including carriage of material to site of work. to the entire satification of engineer-in-charge including carriage of material to site of work. [ Fixed on slopping back wall before fixing ceramic tiles] |
| 54 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (DSR No.17.22A) |
| 55 | Providing and fixing in postion best indian make ISI marked 15mm CP brass extension nipples including the cost of CP flange complete in all respect.(NSI) |
| 56 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR No.17.1.1) |
| 57 | Providing and fixing of wall hang EWC of make ( Jaguar/Cera/Hindware)white vitreous china type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern inside the wall including flush pipe, with automatic controlled device, conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required based on DSR item 17.2 :[Also for Barrier Free Toilet Block] W.C. pan with ISI marked white solid plastic seat and lid |
| 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank , 3 No.x 1000 Ltrs =3000 Ltrs. (DSR item no. 18.48) |
| 59 | Providing and fixing sanitary napkin vending machine, incinerator, Battery and happy days pad complete in all respects. (NSI) |
| 60 | Providing and fixing acralic sheet with silver remark engraving plate 12\\"x18\\" in postion at required place to the entire satification of Engineer-in-charge.(NSI) |
| 61 | Providing and fixing Sun board printing with lamination on 5mm sun board of size 6' x 2' to be fixed at the height of 12' from NGL, leveled in postion to the entire satification of Engineer-in-charge |
| 62 | Providing and fixing acralic sheet with silver remark engraving plate 12\\"x12\\" in postion at required place to the entire satification of Engineer-in-charge. |
| 63 | Providing and fixing Sun board printing with lamination on 5mm sun board of size 24\\" x 30\\" to be fixed at the height of 12' from NGL, leveled in postion to the entire satification of Engineer-in-charge |
| 64 | Providing and Fixing C.P. brass bib cock of approved quality conforming IS:8931 (DSR No.18.49) |
| 65 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved.(DSR :15.60) |
| 66 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia (DSR : 17.28.1.1) |
| 67 | Providing and fixing of Exhaust fan Make: crompton/Havells complete in all respects including the cost of wiring and switches etc. Size 9\\" double ball bearing. |
| 68 | Providing and fixing the louvers complete with frame for exhaust fan of 12\\" diameter. |
| 69 | Providing and fixing of ceiling fan of size 48\\" Make : Crompton/Havells |
| 70 | P/F of LED Tubelights complete set type 36W ,L=4ft, Make : Crompton/Havells |
| 71 | P/F of 1.5mm single core PVC insulated copper cable for wiring at Toilet Block |
| 72 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm (DSR No.1.21.2.E) |
| 73 | 25 mm (DSR No.1.21.2.E) |
| 74 | 50 mm (DSR No.1.21.5.E) |
| 75 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 75 mm X 75 mm X 60 mm deep (DSR No.1.22.1.E) |
| 76 | 100 mm X 100 mm X 60 mm deep (DSR No.1.22.2.E) |
| 77 | 150 mm X 150 mm X 60 mm deep (DSR No.1.22.4.E) |
| 78 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch (DSR No.1.23.1.E) |
| 79 | 3 pin 5/6 A socket outlet (DSR No.1.23.4.E) |
| 80 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. 8 Module (125mmX125mm) (DSR No.1.23.1.E) |
| 81 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. as required.75mm (DSR No.12.43.1) |
| 82 | 110mm (DSR No.12.43.2) |
| 83 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet (DSR No.1.24.4.E) |
| 84 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular swith, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B (DSR No.1.10.2 E&M) |
| 85 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(DSR No.1.12 E) |
| 86 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole (DSR No.2.10.3 E&M) |
| 87 | Supplying and fixing metal box of following sizes (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200 mm X 150 mm X 100 mm (DSR No.1.22.11 E&M) |
| 88 | Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. as required.15/16 amp switch (DSR No.1.24.3 E&M) |
| 89 | 6 pin 15/16 amp socket outlet (DSR No.1.24.5 E&M) |
| 90 | Supplying and fixing following way, single pole and netural, sheet steel, MCB distribution board consurmer unit 240 volts, on surface/reess, complete with timed copper bus bar netural bus bar, earth bus bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, interconnections, phosphatized and powder painted including earthling etc. as required (But without MC/ PCCB/Isolator) 2*4 way (DSR No.2.7.4 E&M) |
| 91 | Providing and fixing 50 watt LED flood light with bracket out side on the wall complete in all respects |
| 92 | Providing and fixing of Hand Drier of reputated make |
| 93 | Providing and placing PVC mat 15mm thick |
| 94 | Providing and placing PVC POT (Gamla) Size 18\\",12\\" dia Green in colour including decoretive plant. |
| 95 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work ( DSR Item No. 10.25.2) |
| 96 | Providing and Fixing IRC jali made of mesh wire 1\\" x 1\\" welded in frame made out of MS flat 25mm in existing ventilation complete in all respects including the cost of primer , painting etc |
| 97 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or more coats on new work (DSR Item No. 13.65.1) |
| 98 | Providing and Fixing of Customer feedback device having 3 nos. push buttons , metal body,wall mounted,mahine use for givng rating on public toilet including terminal box, electrical parts,wiring complete in all respect. |
| 99 | P/F PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement ( DSR Item No. 17.72) |
| 100 | P/F PTMT 15 mm urinal spreader size 95x69x100 mm with 15 mm BSP thread & shapes weighing not less than 60 grams. ( DSR Item No. 17.75) |
| 101 | Providing and fixing piller tap swan type long neck of approved quality : 15 mm nominal bore ( DSR Item No. 18.15.1) |
| 102 | Providing and fixing CP grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole |
| 103 | Providing and fixing of mounting type 0.5 horsepower motor water pump single phase,1440 RPM complete in all respect Make Crompton/Havells/Kirloskar/ABB Etc. |
| 104 | Providing of liquid soap bottles of approved brand/quality complete in all respects |
| 105 | Note :- Less against old material l.S. Please Enable Macros to View BoQ information |
