|
| 1 | Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete. (DSR No. 13.91) |
| 2 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80) |
| 3 | Distempering with oil bound washable distemper or approved brand and manufacture to give an even shade.Old work (two or more coats) over and including priming coat with cement primer (DSR 13.41.1) |
| 4 | Finishing walls with Acrylic smooth exterior paint of required shade old work (Two or more coal applied @ 1.67 ltr/10 sqm) on existing cement paint surface as per DSR No. 13.11.1) |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats an old work (DSR No. 14.54.1) |
| 6 | Replacement by providing & fixing of M.S. sheet door of 18 guage with MS angle 25x25x3mm with MS strip 50x3mm is per site d e s i g n including cost of cutting, welding, fixing at site drilling ir existing structure with drill machine,genset welding set, painting etc. complete as per requirement of site. Sizes 6'-0\\" x3'-0\\" |
| 7 | Repair of existing toilet doors including providing & fixing MS sheet repair, hinges, drilling/holding, inner & outer side locking arrangements (kundi) with the help of welding set, welding rod, gen set labour and tools etc. complete |
| 8 | Replacement by providing and fixing water closet squatting pwater closet squatting pan (Indian type S trap, 10 liter low level white P.V.C. W.C. pan) with 100 mm sand cast Iron P flushing cistern, including flush pipe, with manually controlled device (handle lever) contorming to IS: 7231, with all fittings and fixtures complete, including cutting a n d making g ood the walls a n d floors wherever required: White Vitreous china Orissa pattern W.C. p a n of size 580x440mm with integral type foot rest |
| 9 | Replacement by providing and placing terrace (at floor levels) polyethylene water storage tank, IS :12/01 marked, with cover and suitablelocking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Circular tank (DSr no.18.48) |
| 10 | Providing and fixing of 40mm dia stainless steel 304 grade grab rail with clamps fitting at site with fasteners welding complete in all respect |
| 11 | Providing and fixing of signage boards indicating toilets ID's facilities provided and all other fextures as per Swatch Public Toilets Perameters complete in all respect |
| 12 | Providing and fixing of boards indicating toilets Gender friendly complete in all respect |
| 13 | Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 122mm long. Weighing not less than 99gms.(DSR No.18.54.2) |
| 14 | Providing and fixing of LED tube light 4'x20 watt USHA/CROMPTON make complete |
| 15 | Providing & fixing of 50 watt LED outdoor flood light which focus water proof 240V, 4000 lummens complete in all respect |
| 16 | Providing & fixing exhaust fan 12\\" of reputed make S.A. heavy duty compete as per satifcation of EIC. |
| 17 | Wiring for light point/ fan point/ exhaust 20 Each 550/- 11000.00 24 fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 1.8.1 Group A |
| 18 | Providing & fixing P.V.C. waste pipe of superior quality for sink or Wash basin including PVC waste fiting complete in all respect |
| 19 | Providing & fixing PTMT pillar cock of approved quality and colour 15mm nominal bore 107mm long weighing not less than 100gms.(DSR No.18.56.1) |
| 20 | Providing & fixing PTMT stop cock of approved quality and colour 20mm nominal bore 89mm long weighing not less than 88gms(DSR no.18.55.2) |
| 21 | Providing and fixing in best Indian make C.P. Jet complete in all respect |
| 22 | Providing & fixing PTMT seat cover for EWC & lid complete in all respect |
| 23 | Providing & fixing floor CP grating heavy duty complete in all respect |
| 24 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore (DSR No.18.18.2) |
| 25 | Providing and fixing of Top cover on existing PVC Tank capacity 500 to 1000 Ltr. Each complete in allrespect |
| 26 | Providing and fixing in position best Indian make ISI marked ball cock with brass rod, PVC ball completein all respect of following dia 20mm nominal boreMake :VIKING |
| 27 | Providing and fixing in position best Indian make 5mm thick mirror mounted on water proof ply/PVC sheet ground fixed in position by means of 4 Nos. chormium plated brass screw and washers, including the cost of wooden brass screw and washer, including the cost of wooden/fiber beedingalaround complete in all respect |
| 28 | Providin and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS :7231, with all fitting and fixtures complete 10 litre capacity wihte |
| 29 | Providing and fixing of Flex Board and fixingmaterial for board and fixed properly at various Toilets toilet block of Sector 22, Chandigarh 6\\" x 2\\" |
| 30 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required(DSR No. 17.2.1) Please Enable Macros to View BoQ information |
