|
| 1 | Earth work excavation and deposting on bank with an intial lead of 10m& initial liftm of 2m in hard siff clay , stiff black cotton , hard red earth shales , murram , gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil asper standard specification 20.B |
| 2 | Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and Eight broken stone jelly) using 40mm size hard broken stone jelly excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete and as directed by the departmental officers. |
| 3 | Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with out props, With all cost and conveyance of materials and lab our at site ect ., Coplete as per standard specfication. |
| 4 | Without Props |
| 5 | For Column |
| 6 | Brick work in cement 1:5 mix using well burnt country bricks of size 83/4\\"x41/4\\"x23/4\\" including all cost and conveyance etc complete as per std specification |
| 7 | Supplying , fabricating and placing in position of MS or RTS rods for cutting, bending, straightening of rods and tying the grills for reinforcementwith necessary binding wire including all cost and conveyance of materials to site with all labour cost ect.,complete as per standard specification. |
| 8 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 9 | Ground Floor |
| 10 | Special ceiling Plastering cement mortar 1: 3 mix 10mm thick including cost and conveyance all materials etc. completeas per std specification |
| 11 | Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification. |
| 12 | Supplying and fixing of MS iron door with iron angles including all cost and conveyance all materials to the site and all labour charges etc. complete |
| 13 | Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 14 | Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 15 | Painting two coats with ready mixed approved paint over New steel surface including cost and conveyance all materials etc. complete |
| 16 | Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification. |
| 17 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 21) |
| 18 | Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tube. (SD 89) |
| 19 | Wiring with 2X1.5 sq mm (22/0.3) P V C insulated S C, unsheated Cu. Conductor of 1100 V grade in suitable P V C rigid pipe on wall and ceiling with P V C accessories 100X113mm TW switch box for 5 A3 pin non interlocking C S plug with painting of suitable colour with contineous earth wire connection of 14 SWG TC wire for open P V C plug point ( S D 36) |
| 20 | Wiring with 2X1.5 sq mm (22/0.3) P V C insulated S C, unsheated Cu. Conductor of 1100 V grade in suitable P V C rigid pipe on wall and ceiling with P V C accessories 100X113mm TW switch box for 15 A3 pin non interlocking C S plug with painting of suitable colour with contineous earth wire connection of 14 SWG TC wire for open P V C plug point ( S D 15) |
| 21 | Supply and fixing of 1200mm (48\\") A C ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp(S D 110) |
| 22 | Supplying following pipes and specials etc., complete as per standard specifications. |
| 23 | 15mm Pillar Tap 25mm 3way Ball Valve Please Enable Macros to View BoQ information |
