|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: PROVN OF PAVED AREA NEAR TO GROUND AND CERTAIN MISC CIVIL WORKS AT CHANAKYABAGH, PROVN OF BALCONY DRAINAGE SYSTEM AND INSTALLATION OF GRILLS AT WINDOWS OF LOBBY AREA AT THOMACHAN BLOCK AND PROVN OF WALL PANELLING, FLOORING AND FALSE CEILING IN NCS AT NSB-I CHNAKYABAGH UNDER GE NEW DELHI Contract No: GE/ND-106/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and directed by Engr in charge. |
| 3 | M&L for Hardcore of gauge n.exc 63mm broken brick deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 4 | M&L for 100mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 5 | M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, upto six storey height complete all as specified and directed. |
| 6 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 7 | M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 8 | M&L for 15 mm thick cement plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra (incl new brick work) mixed with WPC as per manufacturer instruction complete all as specified and directed. |
| 9 | M&L for preparation of new plasterd wall surfaces and applying 1.5 mm thick JK / Birla wall putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resisstane primer and applying two coats of exterior emulsion first quality (APPEX ASIAN/ Weather coat (BERGER)/ Weather shield (ICI) or equivelent as approved) of approved colour complete all as specified and directed. |
| 10 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 11 | M&L for 10-12 mm thick heavy duty parking tiles 400 x 400 mm of any colour and pattern decided by Engr-In-Chargeas in pavings laid over 20 mm thick screed bed 1:4 set jointed with cement slurry mixed with pigments to match the shade of tiles complete all as specified and directed.Make : Johnson / Kajaria / Somany |
| 12 | M&L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone ( Note:- Size and colour of stone to be matched with existing stone) complete all as specified and directed. |
| 13 | M&L for 25-30 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq m area and not exceeding 0.5 sq m fixed with and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing &including silicon treatment over 15 mm thick backing layer in CM 1:4 complete all as specified and directed. Note:- Size and colour of stone to be matched with existing stone |
| 14 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) in floors, steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, including 20mm thick screed in cement mortar 1:4 complete all as specified and directed. |
| 15 | M&L for rounding the edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specifeid and directed by Engr in charge. |
| 16 | M&L for Machine cut kota stone slab flooring 20-25mm thick, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 17 | Providing and fixing at site factory made kerb stone of required shape and size of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required also incl dismantling of existing kerb stone complete all as specified and directed. |
| 18 | M&L for one coat of synthetic enamelled paint in any approved pattern and colour including preparation of new or previously untreated surfaces of Kerb stone /concrete/plaster surfaces exceeding 10cm width or grith not other wise provided complete all as specified and directed. |
| 19 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 making good of dismantled portion by plastered work and match with existing surface complete all as specified and directed. |
| 20 | M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed. |
| 21 | M&L for preparation of old steel and iron surfacesof any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. Note :- The work described in these items shall be executed in bldgs up to (G+10 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 11 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates.Note :- Removing building materials /debris / old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond out side MOD Land. |
| 23 | M&L for Virified Ceramic tiles light colour 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in cement mortar 1:6, complete all as specified and directed |
| 24 | All as per item no 22.00 above but in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 25 | S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165 complete all as specified and directed. |
| 26 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr in charge. |
| 27 | S&F PVC (SWR) pipes 150mm bore single socketed, pressure rating 6 kg/cm2 in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 28 | S&F 75 mm PVC (SWR) eyehole bends any radius complete all as specified and directed. |
| 29 | S&F 150 /75 mm T reducer with access door complete all as specified and directed. |
| 30 | S&F 75 mm dia Unplasticised PVC pipes of pressure rating (10 kgf/ cm2) pipe, fixed to walls, ceilings or in floors etc, any type of pipe incl fittings as ends, elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips etc complete all as specified and directed.Make:- Finolex / Supreme / Vectus |
| 31 | M&L for Cutting holes superficial area n exc 150 sq cm, into or through brick walls or through RCC wall built, in cement mortar or cement lime mortar, making hole upto full thickness of wall for fixing pipe into hole, and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required to repair the hole complete all as specified and directed. |
| 32 | S&F in repairs corner shelf 304 x 304 mm size with 5mm thick toughened glass complete all as specified and directed.Make : Jaquar/ Kohler/Hans Grohe/ Villeroy and boch |
| 33 | S&F in repairs, brass chromium plated soap dish with CP brass screws complete all as specified and directed. Make -cera/parko/somany. |
| 34 | S&F in repairs 600 mm long C P finish CP Towel Bar complete all as specified and directed.Make : Jaquar/ Kohler/Hans Grohe/ Villeroy and boch |
| 35 | Taking down cement plaster on brick wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specifeid and directed. |
| 36 | M&L for 15mm thick rendering on fair or other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finish even and smooth without using extra cement complete all as specifeid and directed. |
| 37 | M&L for 10mm thick rendering on ceiling surfaces in Cement morter 1:3 finish even and smooth without using extra cement complete all as specified and directed. |
| 38 | Supply only water proofing compound liquid @ 200 ml per bag of cement complete all as specified and directed. |
| 39 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation complete all as specified and directed. |
| 40 | M&L for three coats of white wash on old plastered surfaces of ceiling including preparation complete all as specified and directed. |
| 41 | M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distember over 1.5mm thick Brila/JK wall care putty over a coat of alkali resistant primer complete all as specifeid and directed. |
| 42 | M&L for preparation of old plastered wall surfaces complete removal of existing treatment ofg wall and applying two coats of oil emulsion distember over 1.5mm thick Brila/JK wall care putty over a coat of alkali resistant primer complete all as specifeid and directed. |
| 43 | M&L for preparation of old plasterd wall surfaces complete removal of existing treatment of wall with machanically and applying JK / Birla wall putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resisstane primer and applying two coats of exterior emulsion first quality (APPEX ASIAN/ Weather coat (BERGER)/ Weather shield (ICI) or equivelent as approved) of approved colour complete all as specified and directed. |
| 44 | Removing demolished material and depositing out side the MOD land complete all as specified and directed. |
| 45 | M&L for powder coated GI T Grid system in 600 x 600 mm module which includes providing and fixing wall angle along the perimeter of the room with nylon sleeves and wooden screws at 300 mm centre to center. Suspendeding the main tee of size from the soffit, soffit cleat, rawl plugs and wire rod & leveling spring clip at 1200mm center to center cross tee, interlockined into the pre-cut slots in the main tees at 600 mm centre to center in direction perpendicular to the main tee to make a grid of 600x 1200mm. 600 mm cross tees are interlocked in the pre cut slots in the 1200mm tees at 1200 mm center to center in direction parallel to the main tee. Cross Tees having length more than 600 mm are to be supported independently. 4.0 mm thick E board or perforated type ceiling tiles with square Edge of size 595x595 mm be placed in the grid of 600x600mm.Size of grid as speicfied by Manufacturers, complete all as specified and directed by Engr in charge. |
| 46 | M&L Providing PVC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick PVC sheet. The panel & strips shall be Density of 600 Kg /Cum Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed. |
| 47 | M&L for PVC 'L' angles fixed at where direction changed portion with adhessive or as per manufacture instruction complete all as specified and directed. |
| 48 | M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble stone including grinding, and polishing complete complete all as specified and directed.Note: (a) Srl Item No 02.00, 03.00, 05.00, 10.00 to 13.00, 18.00, 26.00, 31.00, 44.00, 45.00 & 47.00 of BOQ and all bathroom fittings and sanitary items are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
