|
| 1 | M&L for taking down ceiling fan of 1400/1200mm sweep and refixing on same location or other location of any type/make and size carefully from fan hook and transportation from any location inside AFS area to MES E/M strore yard and back after repairing and painting with synthetic enamel paint by spraying including filling cavity complete all as specified and as directed. |
| 2 | Stripping of ceiling fan 1200/1400mm sweep, washing thoroughly of bearing/bush by petrol, washing/cleaning fan blades body, etc. thoroughly, provision of new greasing, replacement of worn out/defective unserviceable parts (wherever necessary) reassembling the same and testing the fan on full load to entire satisfaction of Engineer-In-Charge complete all as specified and as directed.Notes : (i) Defective/unserviceable parts replaced will be paid seperately in respective item of Sch 'A' as supply only.(ii) The cost of taking down unserviceable parts included in this item. |
| 3 | S&F as in repairs fan bearing No. 6201/6202 suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed. |
| 4 | S&F as in repairs fan capacitor 2.5 Mfd suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed. |
| 5 | Supply only plastic canopy upper & lower of any size and make of ceiling fan fixed with suitable size of screws complete all as specified and as directed. |
| 6 | Supply only rubber reels inclshackle clamp, bolts, nuts, washers split pinsof appropriate size as required complete all as specified and as directed. |
| 7 | Supply only down rod made of 15mm dia GI pipe heavy duty 45cm long including machining/ threading/drilling hole of size suitable for nuts, bolts and washer and split pin suitable for any size and make of fans complete all as specified and as directed. |
| 8 | Hanging only ceiling fan of any sweep and make including connecting up with electric connection from ceiling rose/connector to fan including provn of cable from ceiling rose or connector to fan complete all as specified and as directed.Note : Flexible wire is provided under respective item. |
| 9 | Taking down exhaust/wall/pedestal fan of size 250mm to 450mm sweep of any make and refixing on same location or other location of any type/make and size carefully from fan hook and transportation from any location inside AFS area to MES E/M strore yard for stripping of fan washing thoroughly of bearing/bush by petrol, washing/cleaning fan blades body, etc. thoroughly, provision of new greasing, replacement of worn out/defective unserviceable parts (wherever necessary) assembling the same including provn of twisted twin core flexible wire upto 0.7 mtrs long size 24/0, 020 (ISI marked) and testing the fan on full load to entire satisfaction of Engineer-In-Charge complete all as specified and as directed.Note : (i) Defective/unserviceable parts replaced will be paid seperately in respective item of Sch 'A' as supply only.(ii) The cost of taking down unserviceable parts included in this item. |
| 10 | Rewinding the armature for 250mm to 450mm sweep exhaust fan of any make with super enamelled copper wire of suitable size with and including all insulating materials varnishing, etc. complete all as specified and as directed. |
| 11 | Stripping of exhaust/wall/pedestal fan of size 250mm to 450mm sweep of any make washing thoroughly of bearing/bush by petrol, washing/cleaning fan blades body etc. thoroughly, provision of new greasing, replacement of worn out/defective unserviceable parts (wherever necessary) reassembling the same and testing the fan on full load to entire satisfaction of Engineer-in-Charge complete all as specified and as directed.Notes : (i) Defective/unserviceable parts replaced will be paid seperately in respective item of Sch 'A' as supply only.(ii) The cost of taking down unserviceable parts included in this item. |
| 12 | S&F as in repairs ball bearing of size suitable for exhaust/wall/pedestal fan upto 450mm sweep complete all as specified and as directed. |
| 13 | S&F as in repairs for capacitor ISI marked 230/240/250 volts AC 4 Mfd suitable for exhaust/wall/pedestal fan including condenser spacer and soldering of condenser wire to fan wire complete all as specified and as directed. |
| 14 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 15 | S&F heavy duty exhaust fan steel body AC single phase 230 volt of size 300mm sweep with blades, frame and louvers including all civil works and including taking down old unserviceable one complete all as specified and as directed. Make : Crompton Greaves, Cat No. 300MM Transair (Double ball bearing) or equivalent model from make as specified in Particular Specifications. |
| 16 | S&F heavy duty exhaust fan steel body AC single phase 230 volt of size 450mm sweep with blades, frame and louvers including all civil works and including taking down old u/s one complete all as specified and as directed. Make : Crompton Greaves, Cat No. EXHD450 or equivalent model from make as specified in Particular Specifications. |
| 17 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, 230 volts, 50 Hz, 1200 RPM, copper winding of 300mm sweep complete all as specified and as directed. |
| 18 | S&F 150mm CRISP AIR VX EXH fan (exhaust fan) made of sturdy engineering plastic complete with louvers shutter, 230 volts, 50 Hz, 900 RPM, copper winding of 150mm sweep complete all as specified and directed. |
| 19 | S&F wall mounting fan of 400mm sweep complete all as specified and as directed.NOTE:- The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender, from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
