|
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed. |
| 4 | Resecuring or easing & adjusting of shutters without taking down of shutters of any description not exc 2.0 Sqm each complete all as specified and directed. |
| 5 | S&F factory made solid PVC door frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 6 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed. |
| 7 | S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed. |
| 8 | S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20 (a), fitted to chowkats complete all as directed. |
| 9 | S&F 30 mm thick flush shutters solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and as directed. |
| 10 | S&F35mm factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed. |
| 11 | S&F Stainless Steel butt hinges medium weight of size 100 mm complete all as specified and directed. |
| 12 | S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed . |
| 13 | S&F in repair MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed . |
| 14 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed, |
| 15 | S&F in repair 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed, |
| 16 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 17 | S&F in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 18 | S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 19 | S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 20 | Resecuring or easing & adjusting of shutters without taking down of shutters of any description exc 2.0 Sqm each complete all as specified and directed. |
| 21 | S&F in repair stainless steel door stopper with solid stem and rubber end fixed to doors all as specified and as directed |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsarea exceeding 1.5 sqm complete all as specified and directed. |
| 23 | S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle exc 0.5 sqm in each pan all as specified and as directed. |
| 24 | S&F in repair sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle exc 0.5 sqm in each pan all as specified and as directed. |
| 25 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed |
| 26 | S&Fin repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed |
| 27 | Cutting holes in brick walls exc one brick but not exc two brick in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed |
| 28 | S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165 complete all as specified and directed |
| 29 | S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed |
| 30 | S&F in repair angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed |
| 31 | S&F in repair 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 32 | S&F in repair tubular Towel rail chromium plated 20mm dia 'D' type 600 mm long including brass screws and wooden / plastic cleats complete all as specified and directed |
| 33 | S&F in repair corner/wall mounted sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed |
| 34 | M&L in repair Vitreous China wash basin, white, flat back, size 550x400 mm including suitable size of CI brackets, brass chromuum plated waste fittings 32 mm dia with long screw shanks and fly nuts, chain and plug and porcelain stopper but including brackets complete all as specified and as directed |
| 35 | S&F 15mm dia pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed |
| 36 | S&F in repair 15mm dia pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed |
| 37 | S&F in repair chromium plated hand shower helth faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed |
| 38 | S&F in repair chromium plated shower roses with swivel joints, 125mm size including fixing to steel pipe or union all as specified and directed |
| 39 | S&F in repair CP grating round of size 125mm dia with waste hole of approved design complete all as specified and as directed |
| 40 | S&F in repair 32 mm dia low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 as waste pipe of suitable length etc. complete all as specified and directed |
| 41 | S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 42 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 43 | S&F in repair stainless steel kitchen rack of size 750mm x 600mm x 300mm with 2 shelf, made out of 0.8 mm thick sheet fixed with suitable size cromium plated screws complete all as specified and directed including taking out old one. |
| 44 | S&F in repair 25mm dia stainless steel curtain rod with catrip type with hooks/brackets fixed on walls complete all as specified and directed including taking down old one. |
| 45 | M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 46 | Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, ect but excluding dressed stonework and precast concrete articles complete all as specified and directed |
| 47 | M&L brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed |
| 48 | Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 49 | M&L for 15mm thick plastering in cement mortar on brick/concrete wall surfaces in CM (1:6) and finishing the surfaces even and smooth without using extra cement complete all as specified & directed. |
| 50 | M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings and finishing the surfaces even and smooth without using extra cement complete all as specified & directed. |
| 51 | M&L for preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 52 | M&L for preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 53 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 54 | M&L for coloured printed glazed ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plastering in cement mortar (1:4) brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in backing of tiles complete all as specified and directed. |
| 55 | S&F Non skid ceramic coloured tiles 7 to 8mm th area of each tile exceeding 0.06sqm but not exc 0.11 sqm in floors etc. set and joined in neat cement slury and pointed in coloured cement to match including screed bed or bedding layer 15 mm thick in cement mortar (1:4) on floors for laying floor finish all as specified and as directed. |
| 56 | M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including screed bed or bedding layer 15 mm thick in cement mortar (1:4) on floors for laying floor finish complete all as specified and as directed. |
| 57 | M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including rendering 10 mm thick in cement mortar (1:4)on floors for laying floor finish complete all as specified and as directed. |
| 58 | M&L for PCC 1:2:4 type B1(20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as all as specified directed. |
| 59 | M&L for cleaning of aluminium window sliding channels oiling to roller, tightning to lock, hinges, rubber gasket etc all as specified and as directed. |
| 60 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 61 | Taking down aluminium window/ventilator with side hung,top hung or fixed type, sliding shutter of any description complete all as specified and directed |
| 62 | S&F anodised aluminium door/ window / ventilator shutters, sliding type with styles, rails, sash bar, sliding frame etc. all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws , aluminium handles, locking system etc complete all as specified and directed. |
| 63 | Dismantling water tanks capacity exceeding 1000 ltr but not exceeding 2000 ltr and removing to store complete all as specified and directed |
| 64 | S&F Rotational moulded polyethylene water storage tanks capacity 1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I® complete all as specified and as directed |
| 65 | S&F Rotational moulded polyethylene water storage tanks capacity 2000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I® complete all as specified and as directed |
| 66 | Dismantling of stone slabs & tiles of any description or thickness in floor, aprons etc. complete all as specified and as directed. |
| 67 | M&L Granite (of any type) slab, 20 mm thick machine cut laid over cement screed 20mm thick in CM(1:6) as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing complete all as specified and directed |
| 68 | S&F in repair anodised aluminium grill, having mesh size 100mmx100mm made out 4mm wide and 3mm thick aluminium section with MS hooks of 6mm round bars two numbers each side insert into the jambs/cill complete all as specified and directed including taking down old one. |
| 69 | M&L in repair for replacement of old spindle / washer including head for 15 mm dia brass wall mixer / basin mixer complete all as specified and directed. |
| 70 | S&F in repair 32 / 40 mm dia 1150 mm long PVC corrugated waste pipe fixed to walls complete all as specified and as directed including taking down old one. |
| 71 | S&F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed |
| 72 | S&F in repair Ball valves high pressure of PTMT with PTMT arm & highdensity plastic ball screwed for PVC Connection and fixed in cistern of 25mm dia pipe all as specified and as directed |
| 73 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends in pipe line and fixed complete all as specified and directed |
| 74 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends in pipe line and fixed complete all as specified and directed |
| 75 | S&F in repair vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including PVC seat cover for pedestal pan complete all as specified and directed |
| 76 | S&F in repair vitreous china squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete all as specified and directed |
| 77 | Supplying and laying in repair of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 78 | M&L CPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed. |
| 79 | Taking up or down 15mm steel tubing and connections including cleaning for re fixing or removal to store all as specified and directed. |
| 80 | M&L Tubes, 'medium grade' 15mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 81 | Taking up or down 20mm stee tubing and connections including cleaning for re fixing or removal to storeall as specified and directed. |
| 82 | M&L for Tubes, 'medium grade'20mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors upto 4th storey all as specified and directed. |
| 83 | M&L for Tubes, 'medium grade'20mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floorsupto 5th to 8th storey all as specified and directed. |
| 84 | M&L for Tubes, 'medium grade'20mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors upto 9th to 12th storey all as specified and directed. |
| 85 | Taking up or down 25mm steel tubing and connections including cleaning for re fixing or removal to store all as specified and directed. |
| 86 | M&L Tubes, 'medium grade'25mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors upto 4th storey all as specified and directed. |
| 87 | M&L Tubes, 'medium grade'25mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floorsupto 5th to 8th storey all as specified and directed. |
| 88 | M&L Tubes, 'medium grade'25mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors upto 9th to 12th storey all as specified and directed. |
| 89 | S&Fin repair cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 4th storey i |
| 90 | ALL as per item no 89 above from 5 th to 8 th storied incl taking down old one complete all as specified and directed |
| 91 | ALL as per item no 89 above from9 th to 13th storied incl taking down old one complete all as specified and directed |
| 92 | S&F in repair 100 mm dia CI branch piece double, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed |
| 93 | S&F in repair 100 mm dia CI branch piece single, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed |
| 94 | S&F inrepair cast iron bends 100mm bore of pipe (any radius ) with ducks foot or heel rest complete all as specified and directed |
| 95 | S&F in repair Cast iron floor trap 100 mm, setting and jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed |
| 96 | S&F in repair 100mm diameter of outlet cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified. |
| 97 | Dismantling boarding, anydescription, fixed in any position with nails complete all as specified and directed |
| 98 | M&L for veneered decorative plywood, grade 1, 12mm thick (with BWR resin) with decorative faces veneers on one faces, fixed with screws to timber frame work complete all as specified and directed |
| 99 | S&F110mm dia pipe for PVC (SWR) pipes single socketed/double socketed in any length with rubber ring joints, laid in trenches or in floor all as specified including taking down old pipe upto 4th storey incl taking out old one |
| 100 | S&F110mm dia pipe for PVC (SWR) pipes single socketed/double socketed in any length with rubber ring joints, laid in trenches or in floor all as specified including taking down old pipe upto 5 th to 8 th storied incl l taking out old one |
| 101 | S&F110mm dia pipe for PVC (SWR) pipes single socketed/double socketed in any length with rubber ring joints, laid in trenches or in floor all as specified including taking down old pipe upto 9 th to 12 th storied incl l taking out old one |
| 102 | S&F 110mm dia for PVC (SWR) bends any radius complete all as specified and directed |
| 103 | S&F 110mm dia for PVC (SWR) branch piece single (single Y) equal or unequal complete all as specified and directed |
| 104 | S&F in repairs water tank cover any size moulded polyethylene cover all as specified complete all as specified and directed |
| 105 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 106 | S&F rolled mild steel section Fe 410 -W (Gde- E- 250) quality \\"B\\" framed work as in doors or gates with frame/chowkat with hand made holdfast made from angle of other section with gusset plates, rails braces, flat etc. complete drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings with sliding door bolts etc. (excluding steel covering which shall be measured and paid separately under respective items in this Schedule) and hanging fastening and fixing at any level in high raised bldg complete all as specified and directed by Engineer-in-Charge. |
| 107 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed |
| 108 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed |
| 109 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 110 | M&L for rendering 15 mm thick on brick or concrete surfaces in CM (1:4) mixed with WPC for final coat, each layer is 10 mm thick finished surface even and smooth without using extra cement complete all as directed. (Note :WPC @ 2% by weight of cement or as per manufacturer instructions measured and paid sepatarely). |
| 111 | Material & Labour for applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as specified and directed for work upto 4 th storied. |
| 112 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed. |
| 113 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall fixed with self tapping screws complete all as specified and directed. |
| 114 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensil strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 115 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 116 | S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed incl taking down old one. |
| 117 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with andprovision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) complate all as specified and as directed including taking down old one. |
| 118 | Cleaning of 5000 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writting letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed. |
| 119 | Cleaning of PVC water storage tank of capacity exceeding 1000 litres upto and including 2000 litres by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed. |
| 120 | Demolition of cement concrete( un reinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 121 | M&L for Cement concrete 100 mm thick Type C1 (1:3:6) 20 mm graded stone aggregate as in floor finish concrete surface even and rough finish to receive topping layer. |
| 122 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed with grey pigment cement and pigment and pointed in neat cement slurry in floors all as specified and as directed |
| 123 | M&L for screed bed or bedding layer 15 mm thick in cement mortar (1:4) on floors for laying floor finish complete all as specified and as directed. |
| 124 | M&L 10 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick backing layer CM ( 1: 4) with cement slurry complete all as specified and as directed. |
| 125 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade Complete all as specified and as directed including taking down old one. |
| 126 | M&L Sand filling under floors or in foundations including watering and consolidation complate as directed. |
| 127 | Dismantling of old MS seccon concertina coil of any description from RCC / MS fencing post complete all as specified and directed. |
| 128 | S&F MS seccon concertina coil 600mm dia (before stretching) with 10-12 stands of SRPBT wire of minimum dia 2.59 mm, tensile strength of 1620 N/sqmm with anticorrosive mint green paint conforming IS-513DD grade & IS-4454 part-I/1981 grade-II, for respective materials of razor strip & core wire and all fixing arrangements as per manufactures instruction for fixing & erection complete all as specified and as directed |
| 129 | supply only Integral waterproofing compound |
| 130 | Material and labour for cement concrete (1:4:8) type D2 using 40mm graded crushed trap stone aggregates complete all as specified and directed |
| 131 | M&L for PCC Type B2 (1:2:4) 20mm graded aggregate Cement concrete in surface channels and drains all as specified. |
| 132 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed |
| 133 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified. |
| 134 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed all as specified. |
| 135 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar Internal dia of pipe in 150/200 mm complete all as specified and directed |
| 136 | M&L 200mm dia bore pipe Reinforced concrete pipes, class NP2, laid and jointed complete with collars |
| 137 | M&L for 200 mm thick Concrete bed to drain pipes in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and as directed. |
| 138 | M&L for 150 mm thick Concrete bed to drain pipes in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed. |
| 139 | M&L 150mm dia bore pipe Reinforced concrete pipes, class NP2, laid and jointed complete with collars |
| 140 | Cutting into existing manhole, 150 mm bore pipe, for connecting new drains making good to pipe and removing cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates, smooth finish and re-forming benching complete all as specified and as directed |
| 141 | Material and labour including tools and plant required for cleaning of manholes using the cleaning devices as per rule 5 and protective gear and safety devices as per rule 4 of the Prohibition of Employment as Manual scavengers and their Rehabilitation Rules, 2013 and removing blockage if any and removing night soil/ silted sludge/ waste material outside MD land unprohibited by any authority and following the statutory law/ guidelines complete all as specified and as directed. |
| 142 | M&L including tools and plant required for cleaning of blockage of wash basin, floor trap , nahani trap , gully trap (GT) , kitchen, bath etc. (carrying slage ) in any length upto the first manhole by any means (using chemical or any mechanical device) & flushing with water complete UPTO 4th FLOOR all as specified. |
| 143 | M&L including tools and plant required for cleaning of blockage of wash basin, floor trap , nahani trap , gully trap (GT) , kitchen, bath etc. (carrying sludge ) in any length upto the first manhole by any means (using chemical or any mechanical device) & flushing with water complete UPTO 5th TO 8th FLOOR all as specified. |
| 144 | M&L including tools and plant required for cleaning of blockage of wash basin, floor trap , nahani trap , gully trap (GT) , kitchen, bath etc. (carrying slage ) in any length upto the first manhole by any means (using chemical or any mechanical device) & flushing with water complete UPTO 9th TO 12th FLOOR all as specified. |
| 145 | M&L including tools and plant required for cleaning of the drain pipes upto 150mm dia by roading from manhole and well flushing with water after cleaning and removing all sludge , dirt and solid contents to a distance n exc 100m and burried in ground (min 30cm below ground level) including necessary excavation returning filling and spreading of bleaching powder complete all as specified. |
| 146 | Supply and fixed in repairs 600 mm x 450 mm x 75mm thick precast RCPC perforated drain cover slab of 2 MT load bearing capacity with embossing RCPC 2MT complete all as specified and as directed including taking down old unserviceable cover. |
| 147 | S&F PVC safety net in three Braided layers for covering the dubries / concrete stone from bldg including taking down complete all as specified and directed Please Enable Macros to View BoQ information |
