|
| 1 | SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 100 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively. 1.0 HP, 1-Ø, (10 - 83)Mtr, (40- 10) LPM |
| 2 | 2.0 HP, 1-Ø, (7- 95)Mtr, (55-22) LPM |
| 3 | 3.0 HP, 1-Ø, (40 -170)Mtr, (60- 20) LPM Copper Wound |
| 4 | 5.0 HP, 1-Ø, (56 - 236)Mtr, (90 - 25) LPM Copper wound |
| 5 | 150 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively3.0 HP, 3-Ø, (54 -95)Mtr, (250-50) LPM |
| 6 | 5.0 HP, 3-Ø, (68 - 102)Mtr, (225-85) LPM |
| 7 | 7.5 HP, 3-Ø, (76 - 96)Mtr, (285-180) LPM |
| 8 | 10.0 HP, 3-Ø, (91 - 115)Mtr, (285-180) LPM |
| 9 | 15.0 HP, 3-Ø, (80 - 123)Mtr, (465-305) LPM |
| 10 | Supply Installation testing & Commissioning of ISO certified company made DOL/Star-Delta Starter panel made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection,Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. Appropriate type test certificate / OEM test report shall be submitted. All as per pre approved by Engineer in charge. Foradditional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .For single phase Submersible / Monoblock pump 0.5 HP to 1.5 HP (DOL starter) |
| 11 | 2.0 HP to 3.0 HP (DOL starter) |
| 12 | For Three phase Submersible / Mono block pumpUpto 3.0 HP ( DOL starter ) |
| 13 | 3.0 HP to 5.0 HP ( DOL starter ) |
| 14 | 7.5 HP to 10.0 HP ( DOL starter ) |
| 15 | 3.0 HP to 5.0 HP ( Star / Delta starter ) |
| 16 | 7.5 HP to 10.0 HP ( Star / Delta starter ) |
| 17 | Providing & Laying of synthetic rope for submersible pump ISI marked (IS:5175) of following sizes. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR12mm (suitable up to 50 mm OD pipe) |
| 18 | 16mm (suitable above 50mm & up to 75mm OD pipe) |
| 19 | Providing & Fixing of HDPE pipe ISI mark (IS:4984/2016 ) for water supply (suitable for submersible & jet pump) with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSRfor vertical installation40 mm OD 6 kg / cm2 |
| 20 | 50 mm OD 6 kg / cm2 |
| 21 | 63 mm OD 6 kg / cm2 Please Enable Macros to View BoQ information |
