|
| 1 | Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings.sor no. 20.1/254 |
| 2 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 150mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 150mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.4/P-255 |
| 3 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc.sor no. 20.4.1/P-255 |
| 4 | in all types of rocks.20.4.2/P-255 |
| 5 | Supply of I.S.I. marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per I.S. 1239 (Part-1 & Part-2) 1992 with IVth revision (Up-to-date amendments) 150 mm diasor no. 20.25/P-259 |
| 6 | Drilling of perfectly vertical bore hole of 150mm diameter upto desired depth below ground level in all types of rock including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. completesor no. 20.5/P-255 |
| 7 | Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings.sor no. 20.1/P-254 |
| 8 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 125mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 125mm nominal diameter M.S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.sor no. 20.2/P-254 |
| 9 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc.sor no. 20.2.1/P-254 |
| 10 | in all types of rocks.20.2.2/P-254 |
| 11 | Drilling of perfectly vertical bore hole of 115 mm diameter up to desired depth below ground level in all types of rocks including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.Sor no. 20.3/P-254 |
| 12 | I.S.I. marked UPVC casing pipe confirming to IS 4985/1988 (with up-to-date amendments) CM casing pipes 125mm dia20.26.6/P-259 |
| 13 | I.S.I. marked UPVC casing pipe confirming to IS 4985/1988 (with up-to-date amendments) CM casing pipes 100 mm dia20.26.5/P-259 |
| 14 | Construction of cement concrete platform as per design around the hand pump in M-15 cement concrete including excavation, centering, shuttering, cost of all the materials and labour and curing etc. complete. Including filling in 30 cm depth after removing Black cotton soil including ramming, watering etc. complete in areas of Black cotton soilssor no. 20.28.3/ 260 |
| 15 | Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity single phase, 50 Hz, 220V, deep well submersible pump Stainless Steel body, suitable for 4\\"/6\\" tube well with Contral Panel Starter suitable for Submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire rope and connection cable. Make - Kirloskar, falcon, Texmo, Luby & any ISI standard make)2 H.P. with to 10 to 11 stages, Head Mt. 77-30 Discharge LPM 40-125MPPHED SOR 3rd july 2018 24.20.105/P-266 |
| 16 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.2.5 Sq.mm.multi strandsor no. 24.20.107/P-267 |
| 17 | Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part II32mm dia (medium)sor no. 6.1/P-86 |
| 18 | Labour only for lowering of single phase submersible pumping set of capacity 1 to 3 HP in the tube well with flexible/ rigid pipe line assembly, electrical cable, nylone rope, testing etc. complete including connecting the electrical cable from pump & starter - Depth up to 150 mtr.sor no. 24.18.2/P-258 |
| 19 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 8 Kg/sq.cm : 32 mm dia UADD SOR VOL. - I 2nd Aug. 20217.1.3/P-103 |
| 20 | Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm. Screwed 32mm dia6.8.4/P-90 |
| 21 | Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work) 32mm diasor no. 6.27.4/P-95 Please Enable Macros to View BoQ information |
