Tender For Renewal Of Bharwaliya Karmaini Musabar Gerui Sangad To Farenda Dhani Road In F.Y. 26-27 By (Hot Mix Plant). (Lot No- 8/8)., Gorakhpur-Uttar Pradesh
TDR : 54816993
Tender Notice
BOQ
3 Days Left
Gorakhpur
Uttar Pradesh
Tender For Renewal Of Bharwaliya Karmaini Musabar Gerui Sangad To Farenda Dhani Road In F.Y. 26-27 By (Hot Mix Plant). (Lot No- 8/8).
Name of Work:- Renewal of Bharwaliya karmaini musabar gerui sangad to farenda dhani road in F.Y. 26-27 by (Hot mix plant). (LOT NO- 8/8).
Sl. No.
Item Description
1
WBM Grading - IIIProviding and laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification incluidng spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying and brooming stone screening to fill-up the interstices of coarse aggregate watering and compacting to the required density as per MoRD technical specification clause 405 (MoRD Sl. no. 4.7 and Specification no. 405), (including Labour cess and royalty) (GST will be paid extra as applicable).
2
Tack CoatProviding and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. As per morth specification 503, (Including Labour Cess and cost of Bitumen VG-10), (GST will be paid extra as applicable).
3
20 mm Thick Open Graded Premix CarpetProviding, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades.As per morth specification 511, (including Labour cess, royalty and cost of Bitumen VG-10) (GST will be paid extra as applicable).
4
Seal coat type \\"B\\"Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade..As per morth specification 513, (including Labour cess, royalty and cost of Bitumen VG-10) (GST will be paid extra as applicable). Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
