|
| 1 | Providing vated structural design and drawing of 28.00 Meter spaned Foot Over Bridge in front of Koyal enclave scheme, loni road, Ghaziabad. Vating should be performed by any IIT or Government Engineering Institute. Taking 1% of Rs. 9789441.77 |
| 2 | Earth work in excavation in drains in foul condition by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (exceeding 0.3 m in depth or 10 sqm on plan), including dressing of sides, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.in All kinds of soil.DSR 2023 2.6.1 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR/2023/6.1.2 |
| 4 | Providing and laying in PCC of Specified grade excluding the cost of centering and Shuttering with 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate) 40 mm nominal size from natural sources. All work upto plinth levele. with all complete. (DSR/23 4.1.8) |
| 5 | Centering and shuttering including strutting, propping etc and removal of form work for: (A) Foundations, footing, bases for columns. DSR 2023/4.3.1 |
| 6 | (B) Columns, piers, abutments, pillers, posts and struts. DSR 2023/5.9.6 |
| 7 | (C) Lintels, beams, plinth beams, griders, bressummers and cantilevers |
| 8 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in charge, for the following grades of concrete. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum DSR 5.33.1.1/2023 |
| 9 | Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically, treated bars of grade Fe-500D or more. DSR 2023/5.22.6 |
| 10 | Steel work in built up tubelar (round, square or rectangular hollow tubes etc) turs as etc, including cutting, hosting, fixing in position and apply a primer coat of aprove steel primer including weldin and volted with special shaped washers etc. with hot finished welded type tubes. with all complete. DSR/2023, 10.16.1 |
| 11 | Structural steel work riveted, volted or welded in built up sactioned, trusses and fram work including cutting, hosting, fixing in position and apply a priming coat of steel primer all complete. DSR 2023/10.25.1 |
| 12 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m2. DSR/2023/ 12.1.3 |
| 13 | Providing and fixing 15cm wide, 45cm overall semi-circular plain G.S. Sheet gutter with iron brackets 40x3mm size. Bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/sqm. DSR 2023/12.7.2 |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR 2023/12.7.2 |
| 15 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily: Size of Tile 600X600mm. DSR 2023/ 11.41A3.1 |
| 16 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR 2023/13.4.1 Please Enable Macros to View BoQ information |
