|
| 1 | SCHEDULE OF WORKS |
| 2 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, including removal of debris outside MD land, complete all as specified and as directed. |
| 3 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for roof /chajja padding including removal of debris outside MD land, complete all as specified and as directed. |
| 4 | Material & Labour for Plain cement Concrete 1:2:4 type B-0 (using 12.5mm grades stone aggregate) as in Padding over roof / chajja, complete all as specified and as directed. |
| 5 | Material & Labour Rendering 5mm thick on fair faces of concrete surface of ceiling in CM 1:3, surface finished even and smooth surface without using extra cement, complete all as specified and as directed. |
| 6 | Material & Labour Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement, complete all as specified and as directed. |
| 7 | Material & Labour Rendering 15mm thick on brick work or concrete surface in CM 1:4 including WPC, complete all as specified and as directed. (WPC measured and paid separately). |
| 8 | Supply only Liquid water proofing compound, complete all as specified and as directed. |
| 9 | Preparation of newly plastered surfaces of wall and applying two coats of cement based paint over one coat of primer complete all as specified and as directed. |
| 10 | Preparation of newly plastered surfaces on wall and applying two coats of oil bound distemper over one coat of primer on wall surfaces complete all as specified and as directed. |
| 11 | Preparation of newly plastered surfaces of walls / ceiling, chajja and applying two coats of acrylic Smooth exterior paint of required shade over one coat of priming coat of exterior primer complete all as specified and as directed |
| 12 | Material & Labour for Applying 1mm thick wall care putty on wall complete all as specified and as directed. |
| 13 | Material & Labour for Preparation of New plastered surface and applying three coats of white wash on Ceiling, complete all as specified and as directed. |
| 14 | Preparation of old decorated surfaces of wall including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash of wall complete all as specified and as directed. |
| 15 | Preparation of old decorated surfaces on ceilings including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and as directed. |
| 16 | Preparation of old surfaces of wall by washing, rubbing down & stopping of distempered & painted surfaces, and applying one coat of oil bound distemper on wall white or tined (of approved shade) complete all as specified and as directed. |
| 17 | Preparation of old surfaces on ceilings by washing, rubbing down & stopping of distempered & painted surfaces, and applying one coat of oil bound distemper on ceiling white or tined (of approved shade) complete all as specified and as directed. |
| 18 | Complete removal of existing treatment of old surfaces on wall and applying two coats of oil bound distemper over one coat of primer on wall complete all as specified and as directed. |
| 19 | Complete removal of existing treatment of old treated surfaces on wall washing, rubbing down and stopping of painted surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots old treated plastered surfaces of walls & applying two coat of cement base paint over a coat of primer complete all as specified and directed. |
| 20 | Preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint on steel surfaces, first quality complete all as specified and as directed. |
| 21 | Preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint on wood surfaces, first quality complete all as specified and as directed. |
| 22 | Supply & Fixing in repair pre-painted galvalume aluminium zinc coating GI based Corrugated steel sheet 0.50 mm thick of any colour, having 550 Mpa tensile strength as in roof flat or curved roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 23 | Supply & Fixing in repair pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour, having 550 Mpa tensile strength as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 25 | Supply & Fixing Mild steel roof trusses (framed) trussed purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, Rectangular or square pipe section flat sections) including distance pieces, Chequered plates, cleats, UT and bolt etc. conforming to Fe 290 Grade E-165, complete all as specified and as directed |
| 26 | Supply & Fixing Mild steel flat iron for wind tie securing bolts, posts including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165,complete all as specified and as directed. |
| 27 | Supply & Fixing Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces tec, complete drilled for fixing of steel sheeting or other covering cleats etc. conforming to Fe 290 Gde E-165, complete all as specified and as directed. |
| 28 | Preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described and providing material and labour for applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and as directed. |
| 29 | Preparation of new steel surfaces of any description, not exc 10cm in width or girth not otherwise described and providing material and labour for applying two coats of synthetic enamel paint over a coat of primer,complete all as specified and as directed. |
| 30 | Demolition of brickwork or stone/ PCC block masonry, built in cement mortar or cement lime mortar, including removal of debris complete all as specified and as directed. |
| 31 | Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 40 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed. |
| 32 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided including removal of debris outside MD land, complete all as specified and as directed. |
| 33 | Material and labour for use and waste formwork to side and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, rough finished surfaces of concrete complete all as specified and as directed. |
| 34 | Material & Labour Reinforced Cement Concrete, Type B0 1:2:4 (12.5 mm graded aggregate) slabs suported on walls over roof and the like complete all as specified and as directed. |
| 35 | Material & Labour Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 36 | Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or above GL) as in floor etc, complete removal of debris outside MD land, complete all as specified and as directed |
| 37 | Material and labour for, 25mm thick flooring, with plain cemenet concrete, type B1 1:2:4 (20mm grade aggregate) as in sub base complete all as specified |
| 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 39 | Material & Labour Vitrified ceramic tiles 8 to 9 mm thick light shade (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including providing 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 40 | Material & Labour for Vitrified ceramic tiles 8 to 9 mm thick light shade (square/ rectangular) area of each tile not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including providing 10 mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 41 | Material & Labour for Coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm,Group B-II, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 42 | Material & Labour for Coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, Group B-II, as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 43 | Material & Labour for Glazed ceramic coloured tiles in vertical surface 450x300x7mm/600x300x7mm thick, Group BII set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick rendering in CM 1:4.etc, complete all as specified and as directed. |
| 44 | Material and Labour for Non skid heavy duty tile 400x400x10mm thick coloured jointed free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match and including 15mm thick screed bed layer in CM (1:4) etc complete all as specified and as directed. |
| 45 | Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc.complete all as specified and as directed. |
| 46 | Supply & Fixing of 18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including edge moulding, machine polish to edge as required and like in 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed. |
| 47 | Supply and Fixing in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and as directed. |
| 48 | Supply and Fixing in repairs 110mm dia PVC (SWR), Type B pipes single socketed in any length with rubber joints fixed to walls etc. complete all as specified and as directed. |
| 49 | Supply and Fixing in repairs 75mm dia PVC (SWR) pipes, Type B, single socketed in any length with rubber joints fixed to walls etc complete all as specified and as directed. |
| 50 | Supply and Fixing in repairs PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed. |
| 51 | Supply and Fixing in repairs PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed. |
| 52 | Supply and Fixing in reparis GI tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 15mm dia bore complete all as specified and as directed. |
| 53 | Supply and Fixing in repairs GI tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 20mm dia bore complete all as specified and as directed. |
| 54 | Supply and Fixing in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe complete all specified and as directed. Make: Parryware CAT No. C8964 (S-Trap) or Techno commercial equivalent of approved makes specified here-in-after. |
| 55 | Supply and Fixing in repairs Vitreous china squatting Pan 'Orrisa' Pattern size 580 x 420 mm white with integral foot rest , P or S Trap, and lime concrete bedding complete making good disturb ground complete all as specified and as directed. Make: Parryware CAT No. C0126CS or Techno commercial equivalent of approved makes specified here-in-after. |
| 56 | Supply and Fixing in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and as directed. Make: Parryware CAT No. E8333 or Techno commercial equivalent of approved makes specified here-in-after. |
| 57 | Supply and Fixing in repairs 15mm bore chromium plated cast copper alloy Bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Parryware CAT No. G0204A1 or Techno commercial equivalent of approved makes specified here-in-after |
| 58 | Supply and Fixing in repairs Brass CP Health Faucet with 1 m SS Chrome plated tube & hook complete all as specified and directed. Make : Parryware CAT No T9805A1 or Techno commercial equivalent of approved makes specified here-in-after. |
| 59 | Supply and Fixing in repairs 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fancy type of chromium plated complete all as specified and as directed. Make: Parryware or Techno commercial equivalent of approved makes specified here-in-after |
| 60 | Supply and Fixing in repairs 15mm dia angle stop cock with wall flange, fancy type of chromium plated complete all as specified and as directed. Make: Parryware CAT No. G0253A1 or Techno commercial equivalent of approved makes specified here-in-after |
| 61 | Supply and Fixing in repairsCP Pillar cock 15mm dia bore screwed down pressure complete all as specified and as directed. Make: Parryware CAT No. G0202A1 or Techno commercial equivalent of approved makes specified here-in-after |
| 62 | Supply and Fixing in repairs brass chromium plated shower rose 150mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed. Make: Parryware CAT No. T5135A1 or Techno commercial equivalent of approved makes specified here-in-after |
| 63 | Supply and Fixing in repairs tubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed.Make: Parryware CAT No. T5901A1 or Techno commercial equivalent of approved makes specified here-in-after Please Enable Macros to View BoQ information |
