|
| 1 | Item Description/ Heading |
| 2 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 3 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 4 | Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in ratesbelow. (b) MEDIUM- 80mm.(8.64kg./m) |
| 5 | Lowering, specials laying and jointing of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position,as directed by Engineer-in-charge. MEDIUM 80mm.(8.64kg./m) |
| 6 | H.D.P.E.PIPES - Providing and supplying instandard lengths Polyethelene Pipes, confirming to IS4984/14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e.thread/ insert joint/ quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shadeduly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc.complete. (Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form) PE-100, 12.5Kg/Sq.cm: 75 mm |
| 7 | Lowering,LayingandJointingH.D.P.E./ M.D.P.E.pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. andall labours as directed by engineer incharge as per IS-7634 Part II For all classes. 75 mm |
| 8 | Providing, double flanged short body pattern type manually operated Butterfly Valve havingbody, disc andend cover in graded cast iron to IS-210 Gr.CF 200 generally confirming to IS-13095-1991, Syntheticrubber face dring secured on disc by retaining ring with stainless steel screwstub shaft of stainless steel riding in teflon bearing including inspection charges,transportation up to departmental store, unloading, stacking excluding GST levied by GOI & GOMinall respect etc. excluding C.C. foundation /structural steel support. b) Butterflyvalve-PN-1.6 (With by pass arrangement) 80mm. |
| 9 | Lowering, laying and jointing in position followingC.I.D/FReflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 80mm. |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 11 | Providing and fixing of H.D.P.E. Tee of 75x75 mm dia. Including with all materials for jointing procedure complete as per instruction of Engineer Incharge. |
| 12 | Providing and fixing of Collor joint and Flange (G.I.) of 75 mm dia. Including with all materials for jointing procedure complete as per instruction of Engineer Incharge. |
| 13 | Submersible monoblock Pump set (with Bronze /Stainless steel(CF8M) Impeller) Horizontal /Vertical - up to 3 stages (Motor with water lubricated bearing to accept entire hydraulic thrust) - 20.0 HP |
| 14 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
