|
| 1 | Item No. 1)Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. Item No. 46.13 930/ cmt |
| 2 | Item No.2) Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. Item no. 46.11 380/Cmt |
| 3 | ITEM NO 3 :-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Bd.A.1 Page One Number 259 Item No. 21.02 207/ cmt |
| 4 | ITEM NO 4 Excavation for foundation inSoft rockandoldcement or limemasonry foundations including removing the excavatedmaterial upto adistanceof 50metres beyond the buildingareaandstackingasdirected, includingdewatering, preparingthebedfor the foundationandnecessarybackfillingwith availableearth/murum, ramming ,watering includingshoringand struttingetc.complete.(Liftfrom1.5mTo3.0m.)ByMechanical Means Item no. 21.16 524/Cmt |
| 5 | ITEM NO 5:-Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40Kilogrameach complete as per drawings and Technical specifications etc. complete. (boulder laid without wire crates) Item No. 14.69 1872/ cmt |
| 6 | ITEM NO 6:-Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary A) Raft & cut off wall )BR 4 Page No 104.105 Item No. 12.24 223/ Hour |
| 7 | ITEM NO.7:-Providing and laying in PCC M15 grade leveling course below approach slab complete with fully automatic micro processor PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and Technical specifications etc. complete with fine agreegates of required specifications ( VSI sand finely washed etc ) MORT and H 1700 and 2700 Item No. 14.58 5976/ cmt |
| 8 | ITEM NO.8:-Providing and laying in situ / ready mixM-25 plain cement concrete of trap/granite /quartzite/ gneissmetal for cast in citu piers, abutment, returns, wings etc.includingprovisionof \\"V\\" shapedfalse joints toformsuitablepanelson thefaces to approve design with compacting by vibrating and curing complete, including plywood/steel formworkcentering ( excludingdewateringbymeans of pump) and including bailling out water and curingfinishinginCM1:3etc.complete. asdirectedby engineer incharge basic rateshallbeincreasedforheight above5.00minfollowinh manners (a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.4 Item No. 17.40 8212/ cmt |
| 9 | ITEM NO .9:-Providing and laying in situ / ready mix controlled M-25 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications ( VSI sand finely washed etc ) Item No. 17.53 8783/ cmt |
| 10 | ITEM NO 10:-Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) RCC work of Ballast walls & Kerb Item nO. 14.44a 9587/cmt R.A. |
| 11 | ITEM NO11:- Providingandlayinginsitu/readymixM-30 controlled cement concrete oftrap/granite/quartzite/ gneissmetal for RCCwork in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic microprocessor basedPLCwith SCADA enabled concrete batch mix plant /pan mixerandfineagreegatesof required specifications (VSIsandfinelywashedetc) i)Heightup to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. Item No. 14.17 11122/cmt |
| 12 | ITEM NO 12-Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. Item No. 14.01 88341/MT R.A. B) Super structure |
| 13 | C) Sub - structure |
| 14 | ITEM NO 13-Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. BR.43 Page One Number 138 Item No. 14.33 1086/Smt |
| 15 | ITEM NO 14-Providing 100mm diameter GI water spouts as per detailed drawings in RCC slab and wearing surface / kerb etc. complete. Item No. 14.50 1127/*No. |
| 16 | ITEM NO 15- Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. Item No. 17.37 533/Rmt |
| 17 | ITEM NO 16- Providing tar paper bearing including laying in proper position etc. complete. Item No. 13.02 99/-Smt |
| 18 | ITEM NO 17- Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion as per approved drawings and technical specifications etc. complete.MORT and H 2700, 1500, 1600 and 1700 Item No. 14.56 2277/ Rmt |
| 19 | ITEM NO 18 Providingand layingof filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than600mmwithsmaller size towards thesoil andbigger size towards thewall andprovidedover the entire surface behind abutment,wingwall and returnwall to the full height compacted to a firm conditionasperdrawingandtechnical specifications etc. complete. Item no. 12.72 1212/Cmt |
| 20 | ITEM NO 19-Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) Item No. 12.70 784/ cmt |
| 21 | ITEM NO 20:-Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete. Item No. 14.88 1508/ smt |
| 22 | ITEM NO 21:-Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) BR.47(a) Page One Number 140 and B. 7, Page One Number38 Item No. 14.39 6538/-cmt |
| 23 | ITEM NO 22:- Fixing in position Road Junction/ Informatory Sign Board in ground with C.C.1:4:8 block of 60cm x 60cm x 75cm size including all leads complete. Item No. 6.20 1949/-No. R.A. Please Enable Macros to View BoQ information |
