|
| 1 | Providing and fixing Ist quality (Superior Quality) Seasoned teakwood like beams,columns,joist,rafters, purlins, purlin cleats,hip rafters, jack rafters, ridges, wall plates, post plates and posts, pedestals or any other wooden members etc. including removing/refixing/replacing damaged/decayed wooden members,fixing with stainless steel screws, cutting, sawing,making proper wood joinery, turning/ shaping/ carving with necessary fixtures and fastenings and as directed by Enginner Incharge etc. complete. Note-Necessary wood section shouldbe provided as per site condition |
| 2 | Providing and applying boiled linseed oil in two coats to the new wood work, including knotting, preparing the surface, scaffolding etc. complete as directed. |
| 3 | Providing and applying Wacker Chemical ( water base antifungal silicon treatment )on stone surface. |
| 4 | Providing leak proof treatment by Injection grouting method in required position etc complete & as directed by Engineer incharge. |
| 5 | Providing and Fixing in position, fabric based two part water proofing of kemperol/ Maris or equivalent make. Item to include, cleaning of surfcae, applying base coat, laying fleece with overlap complete. & as directed by Engineer incharge. |
| 6 | Providing and fixing Indian teak wood plank ceiling 20 mm thick plain underside tongued and grooved including iron screws, scaffolding, if necessary, including one primer coat on under side and one coat of coal tar on upper side etc. complete. & as directed by Engineer incharge. |
| 7 | Providing and laying lead sheet of 400mm to 900mm width and 1.5mm thick including proper fixing jointing, soldering joints with leadrod and as directed by in charge etc. complete & as directed by Engineer incharge. |
| 8 | Providing and fixing 1st quality seasoned Burma teakwood in required size including cutting, sawing,making proper wood joinery, turning/shaping/carving as per existing pole with necessary fixtures and fastenings etc,complete & as directed by Engineer incharge. |
| 9 | Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete & as directed by Engineer incharge. |
| 10 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- The elevational and base area of the scaffolding shall be measured for payment purpose. |
| 11 | Providing structural steel work in hollow section of various thickness and sizes in square, rectangular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete & as directed by Engineer incharge. |
| 12 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 13 | Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon)coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) with COLORBOND ( R ) steel quality super durable polyester paint |
| 14 | Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. |
| 15 | Providing and fixing corrugated galvanised iron sheets of 0.63mm thick(24B.W.G.)for roofing without wind tiles including fastening with galvanised iron screws and bolts,lead and bitumen washers as per drawing etc.complete.(Weightof5.5Kilogram/sq.m.). |
| 16 | Providing and fixing valley gutter of 22B.W.G. (0.8mm)plain galvanised iron sheets 90 cm wide with teakwood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank) |
| 17 | Skilled heavy male/ carpenter |
| 18 | Unskilled heavy male |
| 19 | Providing crane 40 to 80 T capacity |
| 20 | Supply,erecting,Testing And Commissioning of CPRI tested safe shade Early Streamer Emission (ESE) Lightning Arrester NFC-17 102 level 1 107 mtr radious with complete connecting accessories |
| 21 | Supply,erecting,Testing And Commissioning of Test Link Box |
| 22 | Supply,erecting,Testing And Commissioning of Digital counter for ESELA |
| 23 | Supply and Erecting Complete Connecting Accessories |
| 24 | Supply,erecting,Testing And Commissioning of copper cable 16sq.mm |
| 25 | Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V. 1 core 25 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB LT/CU |
| 26 | Supplying, installing and testing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill ground ehancing compound complete with all accesories of copper materials & recording the results as per specification no EA-EP/EF |
| 27 | Providing and back filling carbon based environment friendly back fill earth conductivity enhancing compound of 25 kg bag complete Please Enable Macros to View BoQ information |
