|
| 1 | Schedule 'A' |
| 2 | Dismantling of wrought iron of mild steel work of any description not otherwise provided complete all as specified and directed. |
| 3 | Demolition of cement concrete un-reinforced of any description and in any position not otherwise specifically provided for incl removing the debris out side the premises of MoD land of deposting at low laying area complete all as specified and directed. |
| 4 | Demolition of RCC of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).incl removing the debris out side the premises of MoD land of deposting at low laying area complete all as specified and directed. |
| 5 | Demolition of brick or stone/boulder masonry built in cement mortar complete all as specified and directed. |
| 6 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 7 | M&L cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 8 | M&L for PCC 1:3:6 type C1 (20mm graded Agg) as in coping incl necessary formwork etc complete all as specified and directed. |
| 9 | M/L PCC (1:2:4) type B1 using 20mm graded stone aggregate as in benching , surface channels and drains complete all as specified and directed. |
| 10 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 11 | All as per item No 09 but except bricks complete all as specified and directed. |
| 12 | M&L for rendering 15mm thick in CM 1:4 on on fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth complete all as specified and directed. |
| 13 | Supply only water proofing compound complete all as specified and directed. |
| 14 | S&F in repair 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls as directed. |
| 15 | M&L Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 16 | M&L formwork to side of pillars, posts, struts, piers, columns and stanchions for square, rectangular fair finished surfaces all as specified and directed. |
| 17 | M&L for RCC 1:2:4 type B1 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 18 | M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 19 | M&L for reinforcement TMT bars 10mm dia and over cut to length, bent to shape reqd including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 20 | M&L precast cement concrete (nominal mix) Type B0 1:2:4 (20 mm graded aggregate) as in louvres and jallies,40 mm thick (measured solid), including all mouldings, setting in cm 1:4 complete all as specified and directed. |
| 21 | Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed. |
| 22 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm thick screed bed in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed. |
| 23 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 24 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 25 | Preparation of new surfaces of concrete any description over 10cm girth or width, not otherwise described apply two coat of synthetic enamel paint complete all as specified and directed. |
| 26 | M&L for PCC 1:3:6 type C2 (40mm graded aggregate) 75mm thick as in sub base complete all as specified and directed. |
| 27 | Supplying and laying non woven geotextile filter media behind gabion wall as per MORTH 700 TYPE III geoltextile made of poly propylene or similar fiber manufactured through machine made process of heat bending or needle punching technique and tensile strength 7 KN/M, weight not less than 150 gm/sqm as per manufaturar specification complete all as specified and directed. Makes : M/s Maccaferi Environmental solution Pvt Ltd./M/s Gabion Technologies India Pvt Ltd/M/s Techfab India Industries Ltd./M/s SVN Non Wovens Pvt Ltd./M/s Manas Geotech India Pvt Ltd |
| 28 | Supply and installation of Mechanically woven double twisted hexagonal shaped wire mesh gabion boxes as per IS 16014-2018, Morth clause 2500 of required sizes, Mesh type 10cm x 12cm (D=100mm with tolerence of +/- 2%),(Zn +10% Aluminium alloy) plus Polymer coated, Mesh type wire dia 2.7/3.7mm (ID/OD), Mechanically/edged/selvedged, with partition at every 1m interval and shall have minimum 10 Numbers of mesh openings per meter of mesh perpendicular to the twist, tying with lacing wire of dia 2.2/3.2 mm (ID/OD) supplied @ 5% by weight of gabion boxes will be supplied incl of accessories such as U clamps, thimbles etc laid in position after filling of boulders of size 150 mm to 250 mm all as per detailed specification conforming to codes in vogue all complete as per direction and as approved drawings.Make of Gabion Boxes :- M/s Maccaferi Environmental solution Pvt Ltd / M/s Gabion Technologies India Pvt Ltd./ M/s Techfab India Industries Ltd. / M/s Gurukrupa Wire netting Industries/ M/S A-1 Fence Products Company Pvt Ltd / M/s Shiva Engineering Co. (Brand: CONSEC)Note:-(i) Cost of boulders/Rock is deemed to be inclusive in the rate quoted.(ii) Filling of rocks/boulders shall be as specified & directed by the GE.(iii) Front face shall be neatly packed with good facia rocks for the facing of gabion wall / matress.(iv) The makes mentioned above are subject to compliance of the eligibility of manufacturer given in particular specification. |
| 29 | Dismantling floor, hearth, chequred tiles, interlocking tiles tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 30 | M & L for Machine pressed precast concrete interlocking paver block rubber moulded any shape with gray cement and pigment and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. |
| 31 | M & L for Machine pressed precast concrete interlocking paver block rubber moulded any shape with gray cement and pigment and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed. |
| 32 | Supply only fine aggrigate(sand) for filling under floors complete all as specified and directed. |
| 33 | M&L 100 mm thick plain cement concrete type B 2, 1:2:4 (20mm graded stone agg) as in flooring and finishing the cement concrete surface even and smooth without using extra cement including making mimpressions of expanded metal, whilst the concrete is green complete all as specified and as directed. |
| 34 | M&L 75 mm thick plain cement concrete type D 2, 1:4:8 (40mm graded stone agg) as in flooring and finishing the cement concrete surface even and smooth without using extra cement including making mimpressions of expanded metal, whilst the concrete is green complete all as specified and as directed. |
| 35 | Supply only Metallic floor hardener complete all as specified and directed. |
| 36 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound, bitumen mastic complete all as specified and directed. |
| 37 | M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, bitumen mastic complete all as specified and directed. |
| 38 | M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed. |
| 39 | M&L for Preparation of old surfaces of concrete any description over 10cm girth or width, not otherwise described apply one coat of synthetic enamel paint complete all as specified and directed. |
| 40 | M&L for preparing of new steel surfaces of applying two coat of sythetic enamel paint over one coat of red oxide any description, over 10cm in width or girth not otherwise described complete all as specified and directed. |
| 41 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. Please Enable Macros to View BoQ information |
