|
| 1 | Air Conditioning (Split/Window Type)M&L for Servicing of window type AC 1.5 / 2.0 TR capacity, any type/make, by carefully taking down from window /wall, removing power connection, front PVC grill, air filters and applying air blower to remove all dust, washing, cleaning, removing dirt, including cleaning and washing of cooling and condenser coil, re-assembling the dismantled components, refixing to its original position and testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for servicing of split type AC of 1.5 / 2.0 TR capacity, any type/make, in situ at installed location, removing power connection, carefully opening the indoor and outdoor unit, removing filters, applying blower in both the units to remove all dust, cleaning, washing, removing dirt, including cleaning and washing of evaporator coil of indoor cooling unit and condenser coil of outdoor unit, re-assembling the dismantled components, refixing to its original position and testing for proper functioning complete all as specified and directed by Engineer-in-Charge.Note:-Item Serial No. 1.00 to 2.00 (i) Petty stores such as insulation tape, screws, small pieces of wires shall be provided by the Contractor without any extra cost to the department.complete all as specified and directed (ii). Spare parts alongwith Refrigerant gas shall be measured and paid separately |
| 3 | Dismantling and taking out the existing old unserviceable compressor hermetically sealed unit of any make from window type AC and S&F New compressor suitable for window AC of capacity 1.5 Ton complete all as specified and directed by Engineer in Charge. Make :Tecumesh/Hitachi |
| 4 | All as per Srl item No.3.00 here in before but compressor suitable for window AC of capacity 2.0 Ton complete all as specified and directed by Engineer in Charge. Make : Tecumesh/Hitachi |
| 5 | Dismantling and taking out the existing old unserviceable compressor hermetically sealed unit of any make from split type AC and S&F new sealed pack compressor, copper wound, suitable for 1.5 Ton capacity Split AC of any make as per existing compressor and connecting up and testing complete all as specified and directed. Make :Tecumesh /Godrej/ Kirloskar / LG or equivalent as approved by GE. |
| 6 | ,---ditto--- all as per srl item No. 5.00 here in before but compressor suitable for 2.0 Ton capacity split AC complete all as specified and directed by Engineer in Charge. Make :Tecumesh /Godrej/ Kirloskar / LG or equivalent as approved by GE. |
| 7 | M&L for testing leakage in system of window type Air conditioner of 1.5 ton capacity by injecting nitrogen gas upto 300 PSi, repairing leaking spots / joints with gas welding including supply & fixing of filter pencil type copper (in replacement), cleaning & flushing out complete system with gas, making the system leak proof, vaccumising the system and testing complete all as specified and directed by Engineer in Charge. |
| 8 | All as per Srl item No.7 here in before but compressor suitable for Window type AC of capacity 2.0 Ton complete all as specified and directed by Engineer in Charge. |
| 9 | M&L for testing leakage in system of Split type Air conditioner of 1.5 ton capacity by injecting nitrogen gas upto 300 PSi, repairing leaking spots/joints with gas welding including supply & fixing of filter pencil type copper (in replacement), cleaning & flushing out complete system with gas, making the system leak proof, vaccumising the system complete all as specified and directed by Engineer in Charge |
| 10 | ,---ditto--- all as per srl item No. 9.00 here in before but Split type Air conditioner of 2.0 ton capacity complete all as specified and directed by Engineer in Charge. |
| 11 | S&F in repair starting capacitor of capacity 100/120 MFD complete all as specified and directed by Engineer in ChargeMake: Universal/Dipcon/Usha/Epcos/Brite or equivalent as approved by GE. |
| 12 | S&F in repair running Condenser of capacity 36 MFD complete all as specified and directed by Engineer in Charge. Make: Universal/Dipcon/Usha/Epcos/Brite or equivalent as approved by GE. |
| 13 | S&F in repair running Condenser of capacity 40/45/50 MFD complete all as specified and directed by Engineer in Charge.Make: Universal/Dipcon/Usha/Epcos/Brite or equivalent as approved by GE. |
| 14 | S&F in repair copper cooling Coil and condensor coil suitable for 1.5/2.0 Ton Capacity Window AC complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 15 | S&F in repair copper cooling Coil and condensor coil suitable for 1.5/2.0 Ton Capacity Split AC complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 16 | S&F in repair swing motor suitable for 1.5/2.0 Ton Capacity Window type Air Conditioner complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 17 | S&F in repair swing motor suitable for 1.5/2.0 Ton Capacity Split type Air Conditioner complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 18 | S&F in repair display unit suitable for 1.5/2.0 Ton Capacity Window/Split type Air Conditioner complete all as specified and directed by Engineer in Charge. Make : Renutrol/Indfos/KelvinatorS&F in repair display unit suitable for 1.5/2.0 Ton Capacity Window/Split type Air Conditioner complete all as specified and directed by Engineer in Charge. Make : Renutrol/Indfos/Kelvinator |
| 19 | S&F in repair over load relay suitable for 1.5/2.0 Ton Window type AC complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 20 | S&F in repair over load relay suitable for 1.5/2.0 Ton Split type AC complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 21 | S&F in repair PVC Front gril suitable for 1.5/2.0 Ton window type AC of any Make or model complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 22 | S&F in repair electric blower motor double shaft suitable for 1.5/2.0 Ton Capacity Window type AC complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 23 | S&F suitable for 1.5/2.0 Ton Split type AC (Evaporator/Condenser) complete all as specified and directed by Engineer in Charge. Make : Renutrol/Indfos/Kelvinator |
| 24 | S&F in repair blower motor with fan blade suitable for 1.5/2.0 Split type AC complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 25 | S&F in repair condenser motor with fan blade suitable for 1.5/2 Ton capacity Window type AC complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 26 | S&F in repair condenser motor with fan blade suitable for 1.5/2 Ton capacity Split type AC complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 27 | S&F in repair thermostat switch with knob suitable for AC of any capacity complete all as specified and directed by Engineer in Charge.Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 28 | S&F in repair air Filter Suitable for 1.5/2.0 Ton Capacity Window/Split type Air conditioner complete all as specified and directed by Engineer in Charge. Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 29 | S&F in repair capillary tube length as per existing size suitable for 1.5/2.0 Ton Capacity Air conditioner complete all as specified and directed by Engineer in Charge. Make : Renutrol/ Indofos / Kelvinator or equivalent as approved by GE. |
| 30 | S&F in repair PCB Circuit with remote control suitable for any make and capacity of 1.5/2.0 Ton Window type AC and 1.5/2.0 split type capacity Air Conditioner complete all as specified and directed by Engineer in Charge.Make : Voltas/Carrier/ Hitachi /Blue star as approved by GE. |
| 31 | Supply and fix in replacement of indoor unit hot and cold type complete with evaporator coil, blower motor with fan, PCB with display and remote control unit suitable for split air conditioner of 1.5 TR capacity with and including making connection etc complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in repair for PVC flexible waste condensing drain out pipe for split AC of any capacity suitable size fixed properly on wall / floor with clamps etc connetced propery complete all as specified and directed by Engineer in Charge. |
| 33 | M&L for replacement of damaged Insulation of size 1/4 & 3/8, 1/2 & 5/8 for Split AC complete as per existing on site complete all as specified and directed by Engineer in Charge. |
| 34 | M&L for replacement of Rubber bush suitable for 1.5 / 2.0 / 3.0 ton capacity Suitable for Air conditioner as per sample complete all as specified and directed by Engineer in Charge. |
| 35 | M&L for replacement of Copper tubing of size 1/4 and 3/8 suitable for any type and any capacity Air conditioner complete all as specified and directed by Engineer in Charge. |
| 36 | M&L for replacement of Plug nut of size 1/2 and 5/8 suitable for any type and any capacity Air conditioner complete all as specified and directed by Engineer in Charge. |
| 37 | Taking out and shifting at new location and refixing both indoor and outdoor unit of split type Air conditioning electrically driven 230V/250V, AC 50 Hz capacity 1.5/2.0 Ton in wall with rowl plugs including making holes for inlet /outlet in the wall with 50mmX50mmX6mm size of agle iron for foundation of condensing unit as per suitable size and making good existing surface including insulation of tubing with expanded polythene foam insulation tubing and making necessary connection including M&L for unplastiised PVC pipe medium duly 20 mm dia for draining out condensed water all as required and directed including necessary connection through voltage stabilizer etc complete all as specified and directed |
| 38 | M&L for rewinding for fan motor of air conditioner of any make and model upto 2 TR with super enameled copper wire of existing size and weight including replacement of bushing etc complete all as specified and directed |
| 39 | S&F in repair of PVC insulated sheathed flexible round, 3 core cable with copper conductor of size 80 / 0.20 for AC etc complete all as specified and directed |
| 40 | S&F in repair of sheet metal enclosure, single pole & neutral with two pin & earth plug and socket with one MCB B curve single pole 20 amp, 240 volts etc complete all as specified and directed. |
| 41 | S&F in repair of contactor relay for split type AC etc complete all as specified and directed |
| 42 | S&F in repair of 3 pin metal socket & plug top for AC point single phase 240 volts etc complete all as specified and directed |
| 43 | S&F in repair in repair of MCB single pole 240 volts, 20 to 32 amps, 10 kA, 'C' series, ISI marked complete. Make - Legrand DX3 / Schneider / Hager as approved. |
| 44 | S&F commercial plywood 4.0 mm thick provided in existing window upto double story bldg including cutting of plywood to opening size etc as required. (The area of plywood with external dimensions shall be measured for payment without deducting for central opening) etc complete all as specified and directed |
| 45 | Dismantling of split AC of any capacity including refrigerant pipes, service connection, metal clad box and voltage stabilizer complete as required at site and depositing the same to MES yard. SOP is to be followed by proper pumping down of refrigerant gas before dismantling etc complete all as specified and directed |
| 46 | Material and labour for gas charging(Refrigerent) for window/split AC of any capacity with R - 22/R-134A/R-410A or any other recommended refrigerant gas and testing for proper cooling including six month top up warranty etc complete all as specified and directed and by Engineer-in-Charge. |
| 47 | Supply and fix in replacement of heavy duty Mild Steel powder coated wall mount bracket with grouting bolts complete set suitable for wall mounting of outdoor unit of 1.5 / 2.0 TR capacity split type AC complete all as specified and directed by Engineer-in-Charge. |
| 48 | M&L for core cutting (stone) and making hole suitable for 1.5/2.0/ AC/ exhaust of any size, nuts, bolts washer including plastering and make good the disturbed surface with the existing all as specified and directed. |
| 49 | Supply and testing in replacement of remote control unit with batteries suitable for 1.5 / 2.0 TR capacity split type / window type Air conditioners of existing model complete all as specified and directed and by Engineer-in-Charge. |
| 50 | Supply and fix in replacement of split AC hot & cold outdoor unit Kit of 1.5 TR capacity, company made, consist of metal sheet enclosure / housing, condenser coil, wiring kit, condenser fan motor, condenser fan and blower, PCB etc complete complete all as specified and directed by Engineer-in-Charge. |
| 51 | WATER COOLERDismantling and taking out the existing old unsv compressor sealed unit from Water cooler and S&F new hermatically sealed compressor copper wound unit for operation on single phase, 230 V, 50 Hz, AC supply & confirm to IS-1067 Part-I, suitable for Water cooler of cooling capacity 40/80 ltrs/hrs, connecting and testing complete all as specified and directedMake - Kirloskar/Godrej/LG/Tecumseh or equivalent as approved by GE. Note :- 1. All Engineering works shall be carried out at site/E/M store yard only in presence of JE/Engr- in- Charge.2. No equipment shall be transport/carry out to local market for repairs |
| 52 | ,---ditt--- all as per item No. 51.00 here in before but compressor suitable for Water Cooler of cooling capacity 60/120 ltrs/hrs complete all as specified and directed by Engineer in Charge.Make - Kirloskar/Godrej/LG/Tecumseh or equivalent as approved by GE. |
| 53 | ,---ditt--- all as per item No. 51.00 here in before but compressor suitable for Water Cooler of cooling capacity 150/150 ltrs/hrs complete all as specified and directed by Engineer in Charge.Make - Kirloskar/Godrej/LG/Tecumseh or equivalent as approved by GE. |
| 54 | M&L Checking the unserviceable water cooler of any make, size and capacity, making it serviceable by tightening the connection, checking power point and making it functional, replacement of screws, small pieces of wire, etc complete all as specified and directed.Note:- (i) Petty stores such as insulation tape, screws, small pieces of wires, plug top etc shall be provided by the Contractor without any extra cost to the department.complete all as specified and directed (ii) Spare parts alongwith Refrigerant gas shalll be measured and paid seperately |
| 55 | S&F in repair condensor motor 1/35 HP 230V,SP, 50 Hz suitable for 40/80 capacity water cooler as per existng sample etc complete all as specified and directedMake : LG/Universal/Airmaster or equivalent as approved by GE. |
| 56 | ,---ditto--- all as per item No. 55 here in before but motor of 1/10 HP suitable for 150/150, 60/120 capacity or equivalent water cooler as per existng sample complete all as specified and directed by Engineer -in-Charge.Make : LG/Universal/Airmaster or equivalent as approved by GE. |
| 57 | S&F in repair condenser Blower fan blade suitable for 150/150, 60/120 and 40/80 capacity water cooler or suitable for 1/10HP & 1/35 HP fan motor only including nuts/bolts any make and any capacity as per site requirement complete all as specified and directed by Engineer -in-Charge. |
| 58 | S&F in repair capacitor for condenser motor suitable for any capacity, size water cooler complete all as specified and directed by Engineer -in-Charge.Make: Usha/Asian/Brite/Epcos/Dipcon/Concap or equivalent as approved by GE. |
| 59 | S&F starting Capacitor suitable for compressor of water cooler 150/150, 60/120 and 40/80 capacity complete all as specified and directed by Engineer -in-Charge.Make: Usha/Asian/Brite/Epcos/Dipcon/Concap or equivalent as approved by GE. |
| 60 | S&F in repair running Capacitor suitable for compressor of water cooler 150/150,60/120 and 40/80 capacity complete all as specified and directed by Engineer -in-Charge.Make: Usha/Asian/Brite/Epcos/Dipcon/Concap or equivalent as approved by GE. |
| 61 | S&F in repair starting relay current type suitable for compressor of water cooler 150/150, 60/120 and 40/80 capacity complete all as specified and directed by Engineer -in-Charge.Make: Usha/Asian/Brite/Epcos/Dipcon/Concap or equivalent as approved by GE. |
| 62 | S&F in repair over load Protector with relay box type suitable for compressor of water cooler 150/150, 60/120 and 40/80 capacity complete all as specified and directed Make Hitachi/Anupurna/whirlpool or equivalent as approved by GE. |
| 63 | S&F in repair thermostat switch with knob suitable for compressor of water cooler 150/150, 60/120 and 40/80 capacity complete all as specified and directedMake : Godrej / Renutrol/Anpurna/Whirlpool or equivalent as approved by GE. |
| 64 | S&F in repair PVC float valve assy alongwith ball with complete accessories for water cooler of any capacity of size 15 mm dia complete all as specified and directed by Engineer -in-Charge.Make: Prayag/leader/Supreme or equivalent as approved by GE. |
| 65 | Supply and repalcement of Self closing water tap 15 mm dia chromium plated, cast copper alloy, inner/outer thread as per sample for water cooler 150/150,60/120 and 40/80 capacity complete all as specified and directed by Engineer -in-Charge. |
| 66 | S&F in repair capillary tube of suitable length as per existing size for water cooler 150/150, 60/120 and 40/80 capacity complete all as specified and directed by Engineer -in-Charge. |
| 67 | Taking out old u/s copper conductor cable lead from water cooler any capacity and supply and fixing new copper conductor cable for water cooler lead size 2.5 sqmm 3 core AC, 50 Hz, PVC sheathed and overall PVC insulated complete all as specified and directed by Engineer -in-Charge. |
| 68 | Taking out old US plug top from water cooler any capacity and S & F of new plugtop of 15 Amp complete all as specified and directed by Engineer -in-Charge. |
| 69 | Taking out old US PVC drain pipe from water cooler any capacity and S & F new PVC drain pipe with clamp of size 40 mm dia for water cooler complete all as specified and directed by Engineer -in-Charge. |
| 70 | Taking out old U/S top cover gasket of water cooler 80/120/150 ( storage capacity) and supply and fixing new gasket complete all as specified and directed by Engineer -in-Charge.Make : Usha / Blue Star / LG or eqvt as approved by GE |
| 71 | Taking out old unserviceable top cover holding clamp of water cooler of any capacity and supply and fixing new holding clamp complete all as specified and directed by Engineer -in-Charge. |
| 72 | M&L for testing the leakage in system by charging of Nitrogen Gas up to 300 PSI. Repairing of leakage spots/Joints with gas welding work, cleaning and flushing the complete water cooler with gas, making the system leak proof, vacuuming the complete system complete all as specified and directed by Engineer -in-Charge. |
| 73 | Supply and replacement of condensing coil suitable for Water Cooler of capacity 40/80,60/120,150/150 Ltrs including welding/soldering, at site as per existing make complete all as specified and directed by Engineer -in-Charge. |
| 74 | Material and labor for gas charging of water cooler of capacity 40 / 80 Liters to 150 / 150 Liters with R - 22 / R-134A or any other recommended refrigerant gas, and testing for proper cooling including six month top up warranty etc complete all as specified and directed and by Engineer-in-Charge. |
| 75 | Material and labour for tinkering work to water storage steel tank of water cooler by welding / bracing to arrest the leakages including grinding and polishing to make smooth surface complete all as directed by Engineer-in-Charge. |
| 76 | REFRIGERATORM&L for removing burnt/defective sealed compressor unit of any make from any type and Capacity of 165 to 200 Ltrs refrigerator by cutting of suction and discharge lines and un-screwing of foundation nuts and supply & fixing new hermaticlally sealed compressor unit including necessary brazing work as required for new sealed compressor unit complete all as specified and directed by Engineer -in-Charge. Make :- Godrej/Whirlpool/LG/Samsung or equivalent as approved by GE. |
| 77 | ,---ditto ---all as per item No. 76 here in before but compressor suitable for refrigerator of capacity 286 to 320 Ltrs complete all as specified and directed by Engineer -in-Charge.Make :- Godrej/Whirlpool/LG/Samsung or equivalent as approved by GE. . Please Enable Macros to View BoQ information |
| 78 | ,---ditto ---all as per item No. 76 here in before but compressor suitable for refrigerator of capacity 286 to 320 Ltrs complete all as specified and directed by Engineer -in-Charge.Make :- Godrej/Whirlpool/LG/Samsung or equivalent as approved by GE. . Please Enable Macros to View BoQ information |
