Tender For Metallic And Tarring Of Link Road From Darwa To Marheta In Km. 0/00 To 2/400. (Sh:- Providing And Laying Correction Layer Of Wbm G-Iii At Various Damaged Portion & 30Mm Thick Bituminous Concrete Layer In Km. 0/00 To 2/400). Under Mnp., Kasauli-Himachal Pradesh
TDR : 54806482
Tender Notice
BOQ
5 Days Left
Kasauli
Himachal Pradesh
Tender For metallic and tarring Of Link Road From Darwa To Marheta In Km. 0/00 To 2/400. (Sh:- providing and laying Correction Layer Of Wbm G-Iii At Various Damaged Portion & 30Mm Thick Bituminous Concrete Layer In Km. 0/00 To 2/400). Under Mnp.
Name of Work:- M/T of link road from Darwa to Marheta in Km. 0/00 to 2/400. (SH:- P/L correction layer of WBM G-III at various damaged portion & 30mm thick bituminous concrete layer in Km. 0/00 to 2/400). Under MNP.
Sl. No.
Item Description
1
Providing and Laying concrete 1:4:8 (one cement isto four sand isto eight graded stoe aggregate 40 mm (fourty milimeters) nominal size for plain reinforced concrete mechanically mixed and viberated in open foundations including the cost of form work complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 (eight hundred two,eight hundred three,one thousand two hundred two & one thousand two hundred three) including carriage of all labour equipments and material to various location through all modes of transportation in all leads and lifts as per the direction of the Engineer-in-charge
2
Providing and Laying of Interlocking Concrete Blcok Pavements having thickness 80 mm (eighty milimeters) as per drawing and Technical Specification Clause 1504, as per direction of Engineer in Charge including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges.
3
Providing, laying, spreading and compacting by mechnical means of crushed stone aggregate size 53mm to 22.4mm (fifty three millimetre to twenty two point four millimetre) Grading-III 75mm (seventy five millimetres) consolidated thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. (eight to one hundred) static roller in stages to proper grade and camber, including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.18cum (zero point one eight cubic metres) per ten square metres and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 upto entire satisfaction of Engineer-in-Charge, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.
4
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MORD Technical Specification Clause 502 including carriage of materials,labour and equipments to various location of site of work through all modes of transportation in all leads,lifts and all incidentals.
5
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MORD Technical Specification Clause 503 including carriage of materials, labour and equipments to various location of site of work through all modes of transportation in all leads,lifts and all incidentals.
6
Providing and laying 30mm (thirty millimetre) compacted thickness bituminous concrete with 100-120 (one hundred to one hundred twenty) TPH hot mix batch type plant with electronic control grading-II using crushed aggregate 13.2 mm (thirteen decimal two millimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade-Ten) at the rate of not less than 5.5% (five point five percent of mix weight or as per design mix with nono technology (Zycotherm) at the rate 0.1% (zero decimal one percent) weight of bitumen, using cement as filler with quantity not less than 2% (two percent) by weight of total aggregate or as per design mix transported to site, laid with sensor paver finisher hydraulic with sensor conrol to the required grade, level and alignment, over a previsiouly prepared surface and rolling complete with smooth three wheel roller 8-10 (eight to ten ) tonne capacity for initial break down rollng and vibratory roller 8-10 (eight to ten) tonne capacity or pneumatic tyre roller of 12-15 (twelve to fifteen) tonne with tyre pressure of atleast 0.56 MPa (Zero decimal five six) for intermediate rolling and finish rolling with 6-8 (six to eighty) tonne sommth wheeled tandom roller to achive the desire compaction as per MoRTH technical specification section 500 complete in all respect or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
