|
| 1 | LIU Light Interface Unit Type Single Module, 4 or more x SC, Duplex adapter Refer attached Technical specification. | LIU (Light Interface Unit) Type Single Module, 4 or more x SC, Duplex adapter. Pigtail- Multimode Coupler size-30mm Protection class IP40 Cable Entry 3,M16 Gland Maximum Diameter Cable 6mm Mounting DIN rail 35mm |
| 2 | OFC Distribution Box Type 8 port, multimode fiber distribution box Refer attached Technical specification. | OFC Distribution Box Type 8 port, multimode fiber distribution box. Cable Entry 3 nos,M16 Gland Mounting Wall mountable |
| 3 | FO Cable 6 core, OM3, 600m Cable type 1 Gigabit Ethernet 1000BASE-SX or better Refer attached Technical specification. | FO Cable (6 core, OM3, 600m) Cable type 1 Gigabit Ethernet 1000BASE-SX or better Diameter 6mm No. of cores 6 Diameter of each core 1.5 mm Conductor size 62.5/125 micron Cable insulation FRHF Type Duplex, Multimode Wavelength 1300nm (In KKNPP, used wavelength is 1300nm) |
| 4 | OFC Patch Panel Junction Box Dimensions WxHxD 375x275x200mm min. Refer attached Technical specification. | OFC Patch Panel Junction Box Dimensions(WxHxD) 375x275x200mm(min.) Type Plastic enclosure made of fiber reinforced polyester, consisting of lid, gasket seal, including captive+/- stainless steel screws, base with 2 or 4 earthling screws Protection Class IP65 or better Mounting Arrangement should be installed using nut & bolt. The box should have provision for DIN Rack (35mm) mounting. Corrosive property Should be resistant to corrosion and should be capable of continuous operation in saline environment. |
| 5 | LIU Light Interface Unit Type Single Module, 8 or more x SC, Duplex adapter Refer attached Technical specification. | LIU (Light Interface Unit) Type Single Module, 8 or more x SC, Duplex adapter. Pigtail- Multimode Coupler size-30mm Protection class IP40 Cable Entry 3,M16 Gland Maximum Diameter Cable 6mm Mounting DIN rail 35mm |
| 6 | FO cum Ethernet Switch Port Type and Quantity 4x10-100-1000Mbps Ethernet port with RJ-45 connector and 4x1000 Mbps Fiber port with duplex SC connector Refer attached Technical specification. | FO cum Ethernet Switch Port Type& Quantity 4x10/100/1000Mbps Ethernet port (with RJ-45 connector) and 4x1000 Mbps Fiber port (with duplex SC connector, Multimode 62.5/125 micron conductor), Power supply 24V DC Connector SC Duplex (4 nos.), RJ45 (4nos) Reverse polarity protection Required Diagnostic LEDs (Power, link status, data) Protection Class IP30 Mounting DIN rail 35mm |
| 7 | FO Patch Cord Cable Type Duplex, Multimode Wavelength 1300 nm Refer attached Technical specification. | FO Patch Cord Cable Type Duplex, Multimode Wavelength 1300 nm(In KKNPP used wavelength is 1300nm) Connector Type SC Length-1m |
| 8 | PSU Power Supply Unit Type 24V DC DIN rail power supply Refer attached Technical specification. | PSU (Power Supply Unit) Type 24V DC DIN rail power supply Operating Voltage 230V Output voltage 24V DC(-0.5%,+0.5%) Current Consumption at 230V Max. 0.35A Over current protection Required Diagnostic LED (power,DC ON) Protection Class IP20 Mounting DIN rail 35mm |
| 9 | CAT 6a Ethernet Cable Type 1000BASE-TX Connector Type RJ45 Length 5 mtrs Refer attached Technical specification. | CAT 6a Ethernet Cable Type 1000BASE-TX Connector Type RJ45 Length 5 mtrs |
| 10 | FO Cable 12 core, OM3, 600m Cable type Armoured FO cable Refer attached Technical specification. | FO Cable (12 core, OM3, 600m) Cable type Armoured FO cable (for 1 Gigabit Ethernet 1000BASE-SX or better) Diameter 6mm No. of cores 12 Diameter of each core 1.5 mm Conductor size 62.5/125 micron Cable insulation FRHF Type Duplex, Multimode Wavelength 1300nm(In KKNPP used wavelength is 1300nm) |
| 11 | MCB C60N, 2P, 2A C60N,2P,230V AC, lnom equal to 2 A, Icut off equal to 3-5 Inom, B-curve Refer attached Technical specification. | MCB (C60N, 2P, 2A) C60N,2P,230V AC, lnom equal to 2 A, Icut off equal to (3-5)Inom, B-curve |
| 12 | Socket 3-pin, 5A 3 pin, 5Amps utility socket with switch Refer attached Technical specification. | Socket (3-pin, 5A) 3 pin, 5Amps utility socket with switch |
