|
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed. |
| 5 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening complete all as specified and directed. |
| 6 | Taking down shutters of any description n. exc 1 Sqm each and refixing in the same opening complete all as specified and directed. |
| 7 | S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed. |
| 8 | S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 160 of SSR Part -II complete all as specified and directed. |
| 9 | S & F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail panelling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification and drawing in SSR 2020 part-II on page 149 complete all as specified. |
| 10 | S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as directed. |
| 11 | S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, both face is covered with decorative face veneer with lipping/frame to match both sides. Flush shutters shall have teak wood edging including melamine polishes of complete shutter complete all as specified. |
| 12 | S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging complete all as specified. |
| 13 | S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides. The size of rail & style as per IS :1003 (Part I), Kilan seasoned & chemicals pressure treated, complete all as specified. |
| 14 | Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed. |
| 15 | S&F coloured sheet glass 5.50 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle exc 0.5 Sqm in each pan all as specified and as directed. |
| 16 | M&L 5.5 mm thick frosted Sheet glass, ordinary quality and glazing with brass screws in square exc 0.5 sq. m in each pane complete all as specified as directed |
| 17 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed stainless steel wire staple, complete all as specified and directed. |
| 18 | S&F Stainless Steel butt hinges medium weight of size 75 mm complete all as specified and directed. |
| 19 | S&F Stainless Steel butt hinges medium weight of size 100 mm complete all as specified and directed. |
| 20 | S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 21 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 22 | S&F Extruded aluminium alloy handles 100 mm long fabricated type anodised complete all as specified and directed . |
| 23 | S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed . |
| 24 | S&F 200 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed. |
| 25 | Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside cantt area complete all as specified and as directed. |
| 26 | M&L for rendering 15 mm thick in CM (1:6) on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed . |
| 27 | M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 28 | M&L for rendering 15mm thick on brick work or concrete surfaces of wall in cement mortar (1:4) finished surface even and smooth without using extra cement complete all as directed. |
| 29 | Material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces (height starting from 10 mtr and upto 25 mtr height/high rise bldgs) complete all as specified and as directed. |
| 30 | Material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 31 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed. |
| 32 | M&L for water proof treatment on wall surfaces applying two coats fiber reinforced elastomeric liquid applied water proofing membrane (Including crack seal treatment as per site requirement). Formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers. Upon curing, forms a thick, seamless, durable membrane. Apply self priming coat with 33% of water dilution in a verticle direction with brush, roller or spray. Apply final coat with brush, roller or spray on top of that after 4-8 hours. Membrane should be having the below properties. Appearance Viscous liquid; Colour White; repainting surface 3.72 sq mtr per litre. Elongation 220; Water vapour permeance 4.41; Anti Carbonation, R Value (@ 207 DFT) 275 etc including scaffolding works (Use of tubular steel scaffolding shall be mandatory for buildings over three storey high) as directed by engineer in charge complete all as directed. |
| 33 | M&L for water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here in below. (a) 10 mm thick (av. Minimum thickness) plastering in cement mortar 1:4 finishing the plastered surfaces even and smooth over cleaned Rcc roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25 degree C, 0.87 to 0.89 kg/ Liter and viscosity 70-160 cps. (c) providing and laying 3 mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proffing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction( Note : The work shall be executed through authorized applicator approved by the manufacturer of members) |
| 34 | M&L for 3mm thick wall care putty first coat 2mm thick and final 1mm thick on wall surface complete all as specified and directed. |
| 35 | M&L for 2mm thick wall care putty on wall surface complete all as specified and directed. |
| 36 | M & L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 37 | M & L for preparation of old wood or wood based surface and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 38 | M & L for preparation of new surfaces of wood and applying two coats of synthetic enamel paint on wood/wooden based surfaces over one coat of pink primer including preparation of new surfaces over 10 cm width or girth complete all as specified and as directed. |
| 39 | M&L preparation of old steel surface exc 10cm width or girth and applying one coats of synthetic enamel paints all as specified. |
| 40 | M&L preparation of old steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints all as specified. |
| 41 | M&L for preparation of old surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed. |
| 42 | M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed. |
| 43 | M&L for preparation of new surfaces of wall and applying two coats of oil bound distemper over a coat of primer on new wall surfaces complete all as specified and directed. |
| 44 | M & L for preparation old plastered surfaces of wall and applying one coat of cement base paint over a coat of alkali resistant priming paint on plastered surfaces complete all as directed. |
| 45 | M & L for preparation old plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint on plastered surfaces complete all as directed. |
| 46 | M & L for preparation old plastered surfaces of wall and applying three coats of white wash over a coat of chalk whiting priming paint on plastered surfaces complete all as directed. |
| 47 | M & L for preparation old plastered surfaces of wall and applying two coats of white wash over a coat of chalk whiting priming paint on plastered surfaces complete all as directed. |
| 48 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 49 | M&L for screed bed or bedding layer 15 mm thick in cement mortar (1:6) on floors for laying floor finish complete all as specified and as directed. |
| 50 | M&L for 10 mm thick plastering in cement mortar (1:4) brick or on concrete surfaces of wall as in backing coat of tiles and finishing the surfaces fair and even without using extra cement all as specified and directed |
| 51 | M&L for dark shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement mortar screed bed in floor complete all as specified and directed compete all as specified and directed. |
| 52 | M&L for dark shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick (1:6) cement mortar screed bed in floor complete all as specified and directed compete all as specified and directed. |
| 53 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick (1:6) cement mortar screed bed in floor compete all as specified and directed.(Note :- Screed bed shall be measured and paid separately under respective item) |
| 54 | M&L Granite (of any type) tiles, 20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing over 15 mm thick (1:6)cement mortar screed bed in floor complete all as specified and directed (Note :- Screed bed shall be measured and paid separately under respective item) |
| 55 | M&L coloured Glazed ceramic tiles in vertical surface 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule). |
| 56 | Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed |
| 57 | Supplying and laying of 15mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 58 | Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed |
| 59 | Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 60 | Taking up or down 25mm dia steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed |
| 61 | Supplying and laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 62 | M & for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar (1:3)to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces |
| 63 | M&L for CPVC Brass fittings like Brass elbow/ Tee/ Sockets/ Reducing sockets/ MBTA/ FBTA/ Union/ Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall/ floor complete all as specified and directed. |
| 64 | S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 500 Ltr capacity all as specified in SSR and as directed including taking down old one complete all as specified and directed |
| 65 | S&F rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity all as specified in SSR and as directed including taking down old one complete all as specified and directed |
| 66 | S&F PVC tank cover of any size complete all as specified and as directed including taking down old one. |
| 67 | S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and as directed including taking down old one. |
| 68 | S&F Plastic water closet seat cover for wall hang WC/ceramic commode with cistern, white, closed pattern with flat bottom of , and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and as directed including taking down old one. |
| 69 | S&F stainless steel sink with draining board, made out of 1 mm thick sheet for kitchen or laboratory, with plug washers and waste including fixed with cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 mm x 355 mm x 175 mm complete all as specified and directed including taking out old one.( Make Nirali, Popular Range, Model name- Elegance, small, glossy finish or equivalent) |
| 70 | S&F stainless steel sink made out of 1 mm thick sheet for kitchen or laboratory, with plug washers and waste coupling including fixed with cantilever brackets and connecting union to pipe overall size 485 mm x 410 mm, bowl size 410 mm x 355 mm x 165 mm complete all as specified and directed. |
| 71 | Opening cover, taking out night soil, excreta, sludge etc from manholes / sewage sump of any capacity and removing and carrying the same to a distance exc 50 mtr and exc 500 mtr burried underground (min 30 cm below GL) including necessary excavation of pits and returning, filling in, sprinkling of bleaching powder and dressing of surplus soil around to slope if any as directed, cleaning the septic tank and replacing the cover complete all as specified & directed. Note :- Qty of night soil, sludge, excreta etc shall be measured after deposition of same in earth pit based on measurement of dugged earth pit. |
| 72 | Taking out accumulated garbage and other deposits such as broken bricks, silt etc from manholes / gully trap of depth n.exc 1.5 mtr, cleaning as directed and removing the same to a distance n.exc 50 mtr and buried below ground level including necessary excavation of pits and returning, filling in, sprinkling of bleaching powder and dressing of soil around to slope, if any and all as directed, stacking serviceable brick bats for reuse complete all as specified & directed. |
| 73 | Cleaning of chocked toilet, Gully trap and floor trap of any dia including rodding flushing with fresh water after cleaning etc and making the line clear complete all as specified and directed. (Note:Each time will be measured and paid). |
| 74 | S&F 15 mm dia swan neck pillar taps, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without letter 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed including taking out old one. |
| 75 | S&F in repair Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fency type screwed for iron pipe, suitable for 15 mm bore complete all as specified. |
| 76 | S&F in repair Bib tap short body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fency type screwed for iron pipe, suitable for 15 mm bore complete all as specified. |
| 77 | S&F soap dish holder, stainless steel, fancy type chromium plated complete all as specified and as directed including taking out old one. |
| 78 | S&F tubular/towel rail 20 mm dia brass chromium plated 60 cm long between flange brass CP fixed with and incl chromium plated brass screws and wooden plastic cleats all as specified and directed including taking down old one. |
| 79 | S&F towel rail with towel rack with hooks brass chromium plated 60 cm long between flange brass CP fixed with and incl chromium plated brass screws and wooden plastic cleats all as specified and directed including taking down old one. |
| 80 | S&F towel ring rail with 30cm dia brass chromium plated flange brass CP fixed with and incl chromium plated brass screws and wooden plastic cleats all as specified and directed including taking down old one. |
| 81 | S & F in repair Angle / Stop Valve cast copper alloy fancy type15 mm dia bore with capstan handle screwed down screwed for iron pipe or for brass ferrule fixed complete all as specified and directed |
| 82 | S&F chromium plated health faucet ABB body 1.00 m long CP flexible pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one. |
| 83 | S&F stop valves (chromium plated fancy type) with long shank and cup (concealed type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking out old one. |
| 84 | S&F 100 mm dia brass chromium plated shower rose fixed to steel pipe or union complete all as specified and directed including taking out old one. . |
| 85 | S&F wall mixture, cast copper alloy, screwed down, high pressure (chromium plated), with connecting legs, flanges etc. complete for fixing with 15 mm dia pipe, complete all as specified and directed including taking down old one. |
| 86 | S&F chromium plated hand shower 100 mm dia multy flow, ABB body with 8 mm dia. 1.5 m long CP flexiable pipe 15 mm bore complete all as specified and directed including taking down old one. |
| 87 | S&F brass spindle for bib tap for 15 mm bore complete all as specified and directed including taking down old one. |
| 88 | S&F brass spindle for pillar tap for 15 mm bore complete all as specified and directed including taking down old one. |
| 89 | S&F brass spindle for stop cock for 15 mm bore complete all as specified and directed including taking down old one. |
| 90 | S&F 10 Ltr capacity PVC valveless syphonic action type dual flush type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one |
| 91 | S&F for PVC hot and cold water supply connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed |
| 92 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one. |
| 93 | S & F PVC flush / waste pipe 32 mm dia 1150 mm long fixed to walls complete all as specified and as directed including taking down old one. |
| 94 | S&F waste coupling of PTMT half or full threaded with 32 mm dia complete all as specified and directed (Minimum weight - 45gms) including taking out old one. |
| 95 | M&L PVC float of low level flushing cistern complete all as specified and directed including taking out old one. |
| 96 | S & F PTMT Shelf, 450 mm long fixed with and including Chromium plated brass screws and wooden / plastic cleats (minimum weight 300 grms) complete all as specified and directed. |
| 97 | S & F 40mm dia cupboard knobs fixed nut, screw and washer of mild steel, bright polished complete all as specified and directed |
| 98 | Dismantling of 100 mm dia cast iron drain pipes/PVC pipe jointed in cement mortar and taking out old pipe complete all as specified and directed. |
| 99 | S&F 110 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 100 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors bore of pipe 75 mm complete all as specified and directed |
| 101 | S&F PVC (SWR) bends any radius of 110 mm dia with access door complete all as specified and directed. |
| 102 | S&F PVC (SWR) bends any radius of 75 mm dia with access door complete all as specified and directed. |
| 103 | S&F 110 mm dia PVC (SWR) Cowls all as specified and directed including taking down old one.. |
| 104 | S&F PVC (SWR) floor trap, 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed including taking down old one. |
| 105 | S&F PVC (SWR) floor trap, 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed including taking down old one. |
| 106 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engr-in-charge. |
| 107 | S&F 5.5 mm thick Bevelled edge mirror (size-600mmx450mm) of selected quality glass, mounted on 6 mm thich AC building board or commercial plywood with wooden beading all around and fixed to wooden plugs with chormium plated brass screws and cup washers compete all as spfd and directed by Engr- in- Charge. |
| 108 | S&F Stainless Steel Peg Set of size (450x50mm) including four aluminium hooks all as specified and directed.(with 8 nos hooks) |
| 109 | S&F in repair vitreous China Wash down water closet pan (EWC), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and directed |
| 110 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size (P or S type) including connection to trap and to flushing pipe, anti symphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed |
| 111 | S&F in repair vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of CI brackets, brass chromium plated waste fittings 32 mm dia with long screw shanks and fly nuts, flange and bedded in red lead cement complete all as specified and directed |
| 112 | S&F vitreous China urinals, bowl type, flat back of size 465 x 355 x 265 mm (minimum) white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2), screwing urinal to plug etc. complete all as specified and directed by including taking out old one. |
| 113 | M&L PCC 1:2:4 type B1 type (using 20 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed. |
| 114 | Providing & Fixing of 4mm Thick Aluminum Composite Panel EXTERIOR GRADE Solid Color ( BLUE & WHITE ) fixing on wall of the bldgs available at the station size 400mmx400mm with SS rebates/hold fast with mentioned bldg No on the plate (white/blue) complete in all respect as per specifieciation and direction of Engineer -in-Charge |
| 115 | Dismantling boarding any drscription, fixed in any position with nailscomplete all as specified and directed |
| 116 | S&F Anodised aluminium snap grid frame work for ceiling size of grid 605mmX605mm under gypsum board 12mm thick fixed with screws complete all as specified and directed |
| 117 | S&F Gypsum board 60cmX60cm size,fixed with nails over aluminium snap grid frame work all as specfied and directed |
| 118 | S&F 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work all as specfied and directed |
| 119 | S&F 18/19 mm thick Particle bard, medium density, flat pressed, single layer type or threelayer type with BWR type adhesive, fixed with screws to timber frame work Plywood, grade BWR, type BB, fixed with screws to timber frame work all as specfied and directed Please Enable Macros to View BoQ information |
