|
| 1 | Supply and laying in replacement of 150mm DI pipe spigot and socket ends class 'K-7', ISI marked suitable in replacement of old rusted Pipes for tyton joint with inside cement mortar lining and external black bitumen coating of any length properly laid in trenches all as specified and directed by Engr-In-Charge |
| 2 | Supply and laying in replacement of 100mm DI pipe spigot and socket ends class 'K-7', ISI marked suitable in replacement of old rusted Pipes for tyton joint with inside cement mortar lining and external black bitumen coating of any length properly laid in trenches all as specified and directed by Engr-In-Charge |
| 3 | Supply and fix CI or DI fittings for spigot socketed pipe such as bends ( any type , radius and angle ) tapers any type , (straight , bend increasing , decreasing or double socket etc ) tee pieces single branch , Y junction double branch , of size - up to 300 mm dia all as specified and directed. |
| 4 | Material and Labour for run lead joints complete including jointing material such as spun yarn, pig lead all as specified for the CI pipe of following sizes all as specified and directed. |
| 5 | (a) 150mm dia |
| 6 | (b) 100mm dia |
| 7 | M&L Rubber gasket Joint (Tyton Joint) suitable for DI/CI pipe of following sizes all as specified and directed. |
| 8 | (a) 150mm dia pipe |
| 9 | (b) 100mm dia pipe |
| 10 | Supply and Lay in replacement for Galvanized Iron water tubing \\" Medium Grade\\" in accordance with IS 1239:latest with all fittings laid in trenches for following sizes Complete all as specified and directed. |
| 11 | (a) 15 mm dia pipe |
| 12 | (b) 20 mm dia pipe |
| 13 | (c) 25 mm dia pipe |
| 14 | (d) 50 mm dia pipe |
| 15 | (e) 80mm dia pipe |
| 16 | Demolition of valve chamber of any description and size and removing demolished material to a distance exc 1.5 km and not exc 5 km and depositing where directed. |
| 17 | Material & labour brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 90 x90 cm x 6mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrtangement, brick work and all inner suraces of pit and exposed portion of out side shal be plastered in cement motor (1:4) complete all as specified and directed. |
| 18 | S&F MS sheet cover for valve chambers using angle iron 40 x40 x6 mm as a frame embedded in concrete and 3 mm thick MS sheet as in cover with necessary locking arrangements and lifting handles duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. The rate shall include taking measurements to suit the existing valve chamber. |
| 19 | Supply and fix in replacement DI sluice valve complete with iron wheel head , bronze body seat ring, stainless steel non-rising spindle and check nut , including jointing material such as rubber insertion nut bolts washers gas kit etc ISI marked, PN 1.6, conforming to IS 14846 including taking down old existing unserviceable valve and making arrangement for safe working complete of following size |
| 20 | (a ) 80 mm dia pipe |
| 21 | (b ) 100 mm dia pipe |
| 22 | (c) 150 mm dia pipe |
| 23 | Supply and fix DI Non - Return Valves PN 1.6, ISI marked , heavy duty , flanged type with over 250 microns epoxy coating 100 mm dia pipe complete all as specified and directed for the following sizes. |
| 24 | Supply and fix in replacement Gun metal gate valve ISI marked high pressure with iron wheel head screwed both ends for iron pipe line and fixed of properly of following sizes . |
| 25 | (a) 15 mm dia pipe |
| 26 | (b) 20 mm dia pipe |
| 27 | (c) 25 mm dia pipe |
| 28 | (d) 50 mm dia pipe |
| 29 | Cutting of DI/CI/GI mains in position for insertion of new tees, tail pieces , sluice valve etc for following sizes all as specified and directed. |
| 30 | (a) 150 mm dia pipe |
| 31 | (b) 100 mm dia pipe |
| 32 | (c) 80 mm dia pipe |
| 33 | Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in hard /dense soil for laying pipes complete all as specified . |
| 34 | Returning, filling in soils , including spreading ,levelling ,watering and well ramming in layers not exc 25 cm thick complete all as specified and directed . |
| 35 | Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed . |
| 36 | Boring of holes under road, pavement, hardstanding by trenchless technology using ultrasounding technique and necessary machine including HDPE pipe of 200mm dia suitable for 0.4 mpa working pressure completeall as specified and directed |
| 37 | Supply, fixing and commissioning of LT Panel CPRI approved, outdoor type fabricated with 3.15 mm CRCA sheet with anti corrosion cubical enclosure suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3 mm thick machine pressed and angle iron frame 50mm x 50mmx 6mm grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters on both side complete all as specified and directed for following specifications :-(a) Fully Automatic star delta starter for 7.5 HP capacity three phase submersible pump with 16A TPN MCB(b) Motor protection circuit breaker of capacity 7.5 HP with single phase preventer(c) Digital ammeter and Voltmeter(d) LED type indicating lamps |
| 38 | Supply, fixing and commissioning of LT Panel CPRI approved outdoor type fabricated with 3.15 mm CRCA sheet with anti corrosion cubical enclosure suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3 mm thick machine pressed and angle iron frame 50mm x 50mmx 6mm grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters on both side complete all as specified and directed for following specifications :-(a) Fully Automatic star delta starter for 10 HP capacity three phase submersible pump with 20A TPN MCB(b) Motor protection circuit breaker of capacity 10 HP with single phase preventer(c) Digital ammeter and Voltmeter(d) LED type indicating lamps |
| 39 | Supply, fixing and commissioning of LT Panel CPRI approved outdoor type fabricated with 3.15 mm CRCA sheet with anti corrosion cubical enclosure suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3 mm thick machine pressed and angle iron frame 50mm x 50mmx 6mm grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters on both side complete all as specified and directed for following specifications :-(a) DOL starter for 5 HP capacity three phase submersible pump with 10A TPN MCB(b) Motor protection circuit breaker of capacity 5 HP with single phase preventer(c) Digital ammeter and Voltmeter(d) LED type indicating lamps Please Enable Macros to View BoQ information |
| 40 | Supply, fixing and commissioning of LT Panel CPRI approved outdoor type fabricated with 3.15 mm CRCA sheet with anti corrosion cubical enclosure suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3 mm thick machine pressed and angle iron frame 50mm x 50mmx 6mm grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters on both side complete all as specified and directed for following specifications :-(a) DOL starter for 5 HP capacity three phase submersible pump with 10A TPN MCB(b) Motor protection circuit breaker of capacity 5 HP with single phase preventer(c) Digital ammeter and Voltmeter(d) LED type indicating lamps Please Enable Macros to View BoQ information |
