|
| 1 | Taking down chowkhets or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed |
| 2 | Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame). complete all as specified and directed |
| 3 | S & F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed |
| 4 | S & F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed |
| 5 | S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets complete all as specified and directed |
| 6 | S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc complete all as specified and directed |
| 7 | S & F Box type Steel windows/vent with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed. |
| 8 | S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing complete all as specified and directed |
| 9 | S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed |
| 10 | S & F factory made solid panel PVC door shutter with wood free EPS 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification complete all s specified and as directed. |
| 11 | S & F 3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc complete all as specified and directed |
| 12 | S & F 3mm thick pin head glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc complete all as specified and directed |
| 13 | S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed |
| 14 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed |
| 15 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed |
| 16 | S&F 150mm long aluminium handles cast type, anodised and fitted complete all as specified and directed |
| 17 | S&F 100mm long aluminium handles cast type, anodised and fitted complete all as specified and directed |
| 18 | S&F 100 mm long butt hinges (medium weight) colled rolled mild steel complete all as specified and directed. |
| 19 | S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete all as specified and directed |
| 20 | S & F 150MM Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 21 | S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc complete all as specified and directed |
| 22 | S&F iron 6 pin cloth Hanger Wall Mounted Door Mounted Bathroom Cloth Wall Hook, Door Hooks Rail for Hanging Keys, Ivory complete all specified and directed. |
| 23 | Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 24 | M & L for Brick work with sub-class `B' bricks, straight or curved on plan with modular bricks exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed |
| 25 | M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specifed and directed. |
| 26 | Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc. complete all as specified and directed |
| 27 | M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc.complete all as specified and directed |
| 28 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified and directed |
| 29 | M&L for rendering 15mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and directed. |
| 30 | Supplied only for Integral water proofing compound complete all as specified and directed |
| 31 | M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces complete all as specified and directed. |
| 32 | M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash complete all as specified and directed |
| 33 | M & L for Preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed |
| 34 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no clain on account of misunderstanding or otherwise shall be admissible on this account. |
| 35 | As per item No 34 but old surface of wall including preparation of surface complete all as specified and directed Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no clain on account of misunderstanding or otherwise shall be admissible on this account. |
| 36 | M & L for Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care puttyover a coat of chalk whitening preparatory to distempering on walls etc complete all as specified and directed |
| 37 | M & L for Preparing old plastered surfaces of wall and applying one coat of cement based paint complete all as specified and directed |
| 38 | M & L for Preparing old plastered surfaces of wall and applying two coat of oil bound distemper etc complete all as specified and directed |
| 39 | M & L for Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed. |
| 40 | M& L for Preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed |
| 42 | M&L for Ceramic tiles 7-8 mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm Light shade ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 43 | All as per item No 42 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified and as directed. |
| 44 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness(below or above ground level) unreinforced complete all as specified and directed |
| 45 | M & L PCC 1:3:6 type C2 (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified and directed. |
| 46 | M&L of 25 mm thick PCC 1:2:4 type B-0 as a sub base to receive topping layer finished even and rough complete all as specified and as directed. |
| 47 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 48 | M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base laid and mixed with pigment to match the shade of the slab includingrubbing and polishing complete all as specified and directed |
| 49 | M&L Makrana white marble 18- 20mm thick machine cut, bedded jointed and pointed with white cement slurry including cutting and polishing types (mirror finish) over 15mm thick screed bed in CM ( 1:6) as in floor finished, complete all as specified and directed |
| 50 | M&L for Non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm , in floors etc . Set and jointed in neat cement slurry and pointed in while or coloured cement to match etc complete all as specified and directed |
| 51 | M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed |
| 52 | Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed |
| 53 | S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe. complete all as specified and directed |
| 54 | S&F in repair vitreous china wash basin agle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 55 | S&F in the wall soap dish, vitrious china white, approximate size 160x160x90 in repairs complete all as specified and directed |
| 56 | Taking up or down 15mm bore steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and directed |
| 57 | S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors. complete all as specified and directed |
| 58 | M & L for Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed |
| 59 | Taking up or down 20mm bore steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and directed |
| 60 | S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed |
| 61 | S & F in repair 15mm bore Bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed complete all as specified and directed |
| 62 | S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered \\"Hot or Cold\\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed |
| 63 | S&F in repair 15mm bore Stop valve fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union and fixed complete all as specified and directed |
| 64 | S&F in repairs gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 65 | S&F in repair Glass corner Shelf of 300mm long complete all as specified and directed |
| 66 | S & F Vitreous China Urinal, back or corner wall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws complete all as specified and directed. |
| 67 | M&L for 75mm dia cast iron Nahani Trap, with grating including jointing to waste pipe fixed in concrete type B1(1:2:4) complete all as specified and directed |
| 68 | M&L for PVC SWR gully trap 125/110mm, setting and jointing with solvent cement with grating including jointing to waste pipe fixed in concrete type B1(1:2:4) complete all as specified and directed |
| 69 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 70 | S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flage complete all as specified and directed. |
| 71 | M & L PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed |
| 72 | Dismantling of water tanks and removing to store of capacity exc 250 Ltr & N exc 500 ltr etc complete all as specified and directed |
| 73 | S&F 500 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed |
| 74 | S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule. |
| 75 | Dismantling plain or corrugated steel sheeting, any gauze, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed |
| 76 | S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 77 | S & F Pre-painted galvalume aluminium zinc coatingn GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley gutter, drip and straight flashing fixed with self tapping screws complete all as specified and directed |
| 78 | Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and as directed. |
| 79 | S&F Framed work rolled section as in framing compound girder staging for end bars, shouldered and riveted, forged into spikes, framed guard bars, dooriron, ladders walk rails, railings, frame work for tanks, water tank,cooler frame as and the like built up from two or more beam or channel section or angles with plates stiffeners Fe 290 G E-165etc complete all as specified and directed |
| 80 | S & F rolled mild steel in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee, angle, channel or flat sections)incl distance pieces, cleats,cooler stand etc conforming to grade Fe-410W-(Gde E-250 Quality A) complete all as specified and as directed. |
| 81 | S&F Cast Iron soil Waste and Vent pipe in any length with or without ears with cement joints laid in in floors/wall of 100mm bore all as specified complete all as specified and fixed in repair complete all as specified and directed |
| 82 | All as per item 81 above but fixed to floor/wall of 75mm bore pipe complete all as specified and directed |
| 83 | S & F Bends ( any radius ) with duck foot or heal rest for 100 mm bore pipe fixed in repair including taking out old fittings complete all as specified and directed |
| 84 | All as per srl item No 83 above but 75mm bore pipe complete all as specified and directed |
| 85 | S & F in CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type ) or with parallel branches for 100mm bore pipe fixed in repair including taking out old fitting complete all as directed with oval access door fixed in repairs complete all as specified and directed |
| 86 | All as per item 85 above but 75mm bore pipe complete all as specified and directed |
| 87 | Dismantling of Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation of Boards/Slap /Blankets, any thick-ness with frame work including Cover Fillets Cornices etc. and Serviceable Ceiling Board and Cover Fillets, etc, keep in Safe Custody for re-use, complete all as specified and as directed. |
| 88 | M & L 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws and applying two coat of oil bound distemper complete all as specified and directed |
| 89 | S & F Anodised aluminium snap grid frame work 605x605 mm for false ceiling complete all as specified and directed |
| 90 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed |
| 91 | M&L for PCC 1:4:8 Type D-2 (using 40mm graded Agg) as in foundations, filling and mass concrete complete all as specified and directed |
| 92 | Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed |
| 93 | M&L Providing, cement concrete 1:2:4 type B-0 (12.5mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges or as in padding concrete complete all as specified and as directed. |
| 94 | M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified and directedNote:- WPC Mesured and Paid Separately. |
| 95 | M & L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm complete all as specified and directed |
| 96 | M & L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions(ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions(iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or \\"MOPLY FP\\" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS. |
| 97 | M&L Cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed; set jointed with grey cement and pigment and pointed in neat cement slurry in floors, and cut and polished including laid over Screed bed or bedding layer of CM 1:4 mortar 15 mm thick for laying floor finishes complete all as specified and directed |
| 98 | M & L Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:6,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding complete all as specified and a directed. |
| 99 | M & L for Providing number plate of size 450 x 300x20mm in CM 1:4 and writing building No of height 8 to 10cms with luminous paint through grooves of size 12 x 12mm ( Base: Black, grooves : orange) complete all as specified and directed |
| 100 | (SCHEDULE-A PART-II E/M) Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge Please Enable Macros to View BoQ information |
| 101 | (SCHEDULE-A PART-II E/M) Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge Please Enable Macros to View BoQ information |
