Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M & L for brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete. including Demolition of brick work, PCC Block or stone/boulder masonary built in cement mortar/lime mortar including all quoins, arches, pillars etc., complete all as specified and directed. |
| 2 | M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4, surfaces finished even and fair, complete all as specified and directed. |
| 3 | M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:6, surfaces finished even and fair including Taking down cement plaster of any description from brick,PCC Block or stone walls etc. and raking out of joints, hacking for key, scrubbing down with water etc and then after preperation of newly plastered surface applying two coat of oil bound distemper over a layer of wall care putty of average thickness 1 mm, complete all as specified and directed. |
| 4 | M & L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4, surfaces finished even and fair including Taking down cement plaster of any description from brick,PCC Block or stone walls etc. and raking out of joints, hacking for key, scrubbing down with water etc and then after preperation of newly plastered surface applying a layer of putty and then apply two coat of weather coat paint, complete all as specified & directed. |
| 5 | M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even, complete all as specified and directed. |
| 6 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 7 | M&L for preparing newly plastered surfaces of ceiling surfaces and applying three coats of white wash etc, complete all as specified and directed. |
| 8 | Demolition of cement concrete as in ground floor and paving n.exc 15cm thick below or above ground level, complete all as specified & directed. |
| 9 | M & L for 75mm thick PCC 1:2:4, type B-2, as in pavings/hard standing/path etc finished uneven and rough without using extra cement, complete all as specified & directed. |
| 10 | M & L for 25mm thick rubber moulded coloured finish chequered cement concrete tiles of approved size , set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified & directed. |
| 11 | M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand, complete all as specified and directed. |
| 12 | M&L for Glazed coloured ceramic tiles 600 x 300 x 7 mm to 8 mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match colored tiles over 10mm thick in CM (1:4) on brick or concrete surfaces of finished rough to receive the glazed tiles . including dismantling of exixting tiles of any description or thickness in walls, complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for Glazed coloured ceramic tiles 450 x 300 x 7 mm to 8 mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match colored tiles over 10mm thick in CM (1:4) on brick or concrete surfaces of finished rough to receive the glazed tiles . including dismantling of exixting tiles of any description or thickness in walls, complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for Non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular) {300 MM X 300 MM} as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6 and dismantling of existing tiles, complete all as specified and directed. |
| 15 | M&L for Non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular) {400 MM X 400 MM} as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6 and dismantling of existing tiles, complete all as specified and directed. |
| 16 | M&L for Non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular) {600 mm x 600 mm} as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6 and dismantling of existing tiles, complete all as specified and directed. |
| 17 | M&L for Non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular) { 600 mm x 600 mm } as in daddo/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:4 and dismantling of existing tiles, complete all as specified and directed. |
| 18 | M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6 and dismantling of existing tiles, complete all as specified and directed. |
| 19 | M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in daddo/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 10mm thick in CM 1:4 and dismantling of existing tiles, complete all as specified and directed. |
| 20 | M & L for Non skid tiles, exterior grade, pattern of size exec 0.08 sqm and nexec 0.18 sqm, 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and including 15mm thick cement screed bed in CM 1:4 and dismantling of existing tiles complete all as specified and as directed. |
| 21 | M & L for 12 to 16mm thick machine cut pre-polished Udaipur green stone slab flooring on cooking platform/window cill,risers,treads laid over and including 15mm thick screed bed or bedding layer in CM 1:6 and jointed with white cement mixed with pigment to match the shade of slab including rubbing and polishing, bull nose edging/moulding and dismantling of existing tiles, complete all as specified & directed. |
| 22 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc, complete all as specified and directed. |
| 23 | S & F of Kota stone slab 18-20 mm thick as in floors/risers/treads/skirting/dado etc and including 15mm screed bed in cement mortar 1:4 cement & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing to achive mirror finish. (size note less than 550x550mm), complete all as specified and directed. |
| 24 | M & L for rubbing and polishing to existing old kota stone slab/marble/terrazzo flooring and skirting to achieve required finish, complete all as specified and directed. |
| 25 | S&F of 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like including screed bed of 1:6 cement slurry etc, complete all as specified and directed. |
| 26 | M & L for preparation of old plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion using roller and including a layer of wall care putty (average thickness 1 mm), complete all as specified & directed. |
| 27 | M & L for preparing of old distempered surface of wall and applying one coat of distemper oil emulsion using roller, complete all as specified and directed. |
| 28 | All as per item No - 27.00 above but one coat of Oil bound distemper on ceiling surface, complete all as specified and directed. |
| 29 | M & L for preparing old plastered or un-plastered surfaces of walls and applying one coat of white wash, complete all as specified & directed. |
| 30 | M & L for preparing plastered or un-plasteredold surfaces of ceiling and applying one coat of white wash complete all as specified & directed. |
| 31 | M & L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 32 | M & L for preparation of old or previously untreated steel surface including roof etc of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 33 | M&L for preparation of old plastered surface of walls and applying one coat of exterior emulsion paint 1st quality (Apex ultima of Asian Paints or equivalent in Berger/Shalimar) paint, complete all as specified and directed by Engineer in Charge.Note:- The tint/ shade of the paint shall be as approved by the GE. |
| 34 | M & L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & directed. |
| 35 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified & directed. |
| 36 | M&L for applying one coat of cement base paint of old plastered or unplasred surfaces of walls of old treated surfaces all as specified including Preparation of old plastered surfaces or unplastered white washed/colour /cement base paint wasshed surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots and efflorescence salts ,removing nails and making good, complete all as specified and directed. |
| 37 | M&L french polishing on surfacesof any description , with or girth including cleaning and preparing the surfaces including a coat of wood filler, complete all as specified and directed. |
| 38 | S & F in repairs beveled edge mirror of selected quality glass mounted chromium plated brackets with chromium plated brass screws and cup washers, complete all as specified & directed. |
| 39 | S & F in repair PVC cabinet mirror size 350mm x 450 mm fixed with steel screws with rowel plug, complete all as specified and directed. |
| 40 | S & F of rotational moulded polyethylene three layered water storage tanks 500 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down existing water tank, complete all as specified & directed. |
| 41 | S & F of rotational moulded polyethylene three layered water storage tanks 1000 Litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including taking down existing water tank, complete all as specified & directed. |
| 42 | S & F in repair of 15 mm bore fancy type bib taps brass chromium plated screwed down, screwed for iron pipe or for brass ferrule including flench, complete all as specified & directed. |
| 43 | S & F in repair of 15mm bore pillar taps, brass chromium plated, screwed down high pressure with or without lettered, hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, complete all as specified & directed. |
| 44 | S & F in repair of 15 mm dia chromium plated angle cocks/stop valves, brass, screwed down, high pressure with crutch or butterfly handle, flench screwed both ends for iron pipe or for union, complete all as specified & directed. |
| 45 | S & F in repairs 20 mm bore PTMT ball valves, high pressure with polyethylene float and fly nuts complete, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 46 | S & F in repairs bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms), complete all as specified and directed. |
| 47 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. Cat No. F5001114 or equivalent as per list of makes. |
| 48 | S & F (in repairs) vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor, complete all as specified and directed. |
| 49 | S & F (in repair) vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover and flushing pipe, complete all as specified and directed. |
| 50 | S & F (in repairs) PVC low level flushing cistern 10 Litre capacity, symphonic action type, white as approved including ball valve, float valve and handle, flush pipe, complete all as specified & directed. |
| 51 | S & F (in repairs) vitreous china wash hand basin, white, size 550 x 400 mm including brackets, chromium placted waste coupling &PVC waste pipe of 32 mm dia, complete all as specified & directed. |
| 52 | S & F in repairs 600mm long PVC connection, 15 mm bore, complete all as specified & directed. |
| 53 | S & F in repair CP brass wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore, complete all as specified and directed. |
| 54 | S & F in repair CP towel rail 600 mm long as a approved quality, complete all as specified & directed. |
| 55 | S & F in repairs 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe, complete all as specified & directed. |
| 56 | S & F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 57 | S&F in repairs for Brass chromium plated waste couplings of dia 32 mm for WHB fixed complete all specified and directed. |
| 58 | S&F in repairs 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 59 | S&F in repairs aluminium peg set of Six ,complete all as specified and as directed. |
| 60 | Cutting Chases for concealed water tubing,shelves,chajjas,sunshades etc and making good disturbed surfaces, cutting not exceeding 10 cm girth, on brick walls, complete all as specified & directed. |
| 61 | Taking up or down steel tubing and connections 15 mm bore pipe and removing from site, complete all as specified and directed. |
| 62 | Taking up or down steel tubing and connections 20 mm bore pipe and removing from site, complete all as specified and directed. |
| 63 | Refixing of 15 mm dia old steel tubing and connections in new or old position (Walls, ceilings, floors etc), complete all as specified and directed. |
| 64 | Refixing of 20 mm dia old steel tubing and connections in new or old position (Walls, ceilings, floors etc), complete all as specified and directed. |
| 65 | S & F of 15 mm bore tubes, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified & directed. |
| 66 | S & F of 20 mm bore tubes, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified & directed. |
| 67 | S & F in repair Kitchen plate rack of stainless steel of size 720mm x 600mm x 230 mm made out of 1 mm thick steel sheet, complete all as specified & directed. |
| 68 | S & F in repairs stainless steel sink with draining board, made out of 1mm thick steel sheet for kitchen with waste pipe, CI cantilever brackets, connecting union overall size 915 x 460mm with bowl size 410 x 330 x 160mm, complete all as specified & directed. |
| 69 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 70 | S & F (in repairs) PVC floor trap 75 mm bore including jointing to waste pipe in cement mortar, complete all as specified & directed. |
| 71 | S & F (in repairs) 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls/floors with necessary fittings complete all as specified & directed. |
| 72 | S & F in repairs PVC (SWR) bends 110 mm bore, complete all as specified and directed. |
| 73 | S & F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floors etc, complete all as specified and directed. |
| 74 | S & F in repairs 75 mm bore PVC (SWR) bends, complete all as specified & directed. |
| 75 | S & F in repairs 40 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floors etc, complete all as specified & directed. |
| 76 | S & F in repairs 40 mm bore PVC (SWR) bends, complete all as specified & directed. |
| 77 | Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc, complete all as specified in Particular specifications. |
| 78 | Supply and fixed in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock (valve) (two numbers), complete all as specified in particular specifications. |
| 79 | S&F in repair CP Brass central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore, complete all as specified and directed. |
| 80 | S&F in repair brass legs for basin mixer fixed with PVC conncetion, complete all as specified and directed. |
| 81 | S&F in repair 15mm bore fancy type bib taps (Long body) brass chromium plated screwed down, screwed for iron pipe or for brass ferrule including flench, complete all as specified & directed. |
| 82 | S&F in repair 15mm bore fancy type bib taps (Two way ) brass chromium plated screwed down, screwed for iron pipe or for brass ferrule including flench, complete all as specified & directed. |
| 83 | S & F in repair CP towel ring as a approved quality, complete all as specified & directed. |
| 84 | S & F in repair water Jet for EWC chromium plated with PVC connection, complete all as specified and directed. |
| 85 | S & F in repair C P Brass hand shower (health faucet) 1 mtr PVC tube with wall hook compelte for EWC, complete all as specified and directed. |
| 86 | S & F in repair brass chromium plated toilet paper holder, complete all as specified and directed. |
| 87 | S & F (in repair) brass chromium plated shower rose 100mm X100mm size including Arm, complete all as specified & directed. |
| 88 | S & F (in repair) CP brass soap dish, complete all as specified & directed. |
| 89 | S & F (in repairs) chromium plated Gratings 125 mm size, complete all as specified & directed. |
| 90 | S&F in repairs PVC waste pipe 32 mm to 40 mm dia size of adequate length (minimum length 60cms) suitable for WHB/Sink with PVC adapter fixed, complete all specified and directed. |
| 91 | S&F in repairs PVC water tank covers of capacity exc 250 Ltrs not exc 500 Ltrs, complete all as specified and directed. |
| 92 | S&F in repairs PVC water tank covers of capacity exc 500 Ltrs not exc 1000 Ltrs, complete all as specified and directed. |
| 93 | S&F in repair of acrylic corner set of three of size (12'X12\\" ,9\\"X9\\" and 6\\" X6\\" ) with railling, complete all as specified and directed. |
| 94 | Repair to low level flushing cistern PVC for making it fully functional and leak proof by replacing PVC syphon kit, complete all as directed and specified. |
| 95 | S&F in repairs false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles semi perforated12 mm thick micro tegular edged GRG false ceilling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items(galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mmto be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.Make : Diamond /Everest/Visaka or equivalent as per list of makes. |
| 96 | M&L 4 mm thick E board tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling incl taking down old ceiling with frame and making good disturbed surface, complete all as directed and specified. |
| 97 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each, complete all as specified & directed. |
| 98 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 Sqm and n.exc 4.00 Sqm each, complete all as specified & directed. |
| 99 | Taking down shutters of any description exc. 1 Sqm & n.exc 2 Sqm each, complete all as specified & directed. |
| 100 | Taking down shutters of any description not exc. 1.00 Sqm each, complete all as specified and directed. |
| 101 | Refixing of shutters of any description exc 2 Sqm each in same opening including taking down, easing and adjusting and also refixing builders hardware as required, complete all as specified and directed. |
| 102 | Refixing of shutters of any description exc 1 Sqm but n.exc 2 Sqm each in same opening including taking down, easing and adjusting and also refixing builders hardware as required, complete all as specified and directed. |
| 103 | S & F of 35mm thick second class hard wood glazed and skeleton door shutters (three panels), open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framming plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009), complete all as specified and directed. |
| 104 | S & F of 28-30 MM mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both side, complete all as specified & directed. |
| 105 | S & F in repairs 3mm thick pin headed figured glass, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight, complete all as specified & directed. |
| 106 | S & F in repairs 3mm thick pin headed ground or obscured or frosted, on one side, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight, complete all as specified & directed. |
| 107 | M & L for factory made single extruded WPC (wood polymer composite)solid door/windows/ceosetory windows and other frames/chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tocxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N(face) & 1100 N (edge),mim compressive strength of 58 N/mm2,modulus of elasticity 900n/mm2 and resistance to spread of flame of class A category with property of being termite/boer proof,water/moisture proof and fire retardent and fixed in position with MS hold fast/lugs/ss dash fastener of required dia and length complete as per direction of engineer in charge.(MS hold fast/lugs or SS dash fastener shall be included, complete all as specified and directed. |
| 108 | S&F of factory made single extruded WPC (wood polymer composite)solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tocxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 650 kg/cum,screw withdrawal strength of 1800 N(face) & 900 N (edge),mim compressive strength of 50 N/mm2,modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of being termite/boer proof,water/moisture proof and fire retardent .WPC to be laminated with PVC foil of min 14 microns thick of approved design pasted with hot melted adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size necessary full body threadeded star headed counter sunk SS screws, complete all as specified and directed. |
| 109 | M&L for providing factory made PVC internal door frame (PRELAM ) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm) made out of extruded 5 mm (+-).25 mm) thick PVC sheet manufactured by an ISO 9001-2008certified company and by joining 3 nos of heat bend PVC sheet section The inside section of size 90 x 30 mm shall be made from plain colour PVC sheet of 5 mm (+- o.25 mm) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25 mm) thick plain PVC sheet The frame shall be mitered cut at two corners and joined with 4 nos of 150 mm longbrackets of 15 mm x 15 mm MS square tube The two vertical door frame are tobe reinforced with 40 mm x 20mm MS square tube of 19 guage through out the frame the door shall be fixed to the wall using anchor fastners A minimum of 4 nos of screw to be provided for each vertical members and min 2 nos for horizontal members etc, complete all as specified and directed. |
| 110 | M&L for providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of MS tube of 19 guage thickness and size 20 mm x 40 mm for stiles as well as top bottom and lock rail MS frame shall have a coat of primer of approved make and manufacturer The inside Panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm thick wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm ) thick plain / prelam PVC sheet manufactured by an ISO 9001-2008 certified company on both side of the inside panel ALl the four edged lipping to pe painted with PVC ink of matching colour of PLAIN/PRELAM moulded PVC sheet of door 0.20 mm thick (5 mm x 4 mm ) thick PVC sheet to be given for lock provision at lock height door to be fixed with frame with 3 nos SS butt hinges of size 100 mm x 25 mm x 25 mm and 50 mm long steel screw drilled suitable for to pass through both the wall of th MS tube other hardwares could be fixed with 25 mm x 8 mm size steel screw etc, complete all as manufacturer specification and drawings. |
| 111 | S&F in repairs PVC boards 19/20 mm thick any colour as in cabinets incl sshelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc, complete all as specified and directed. |
| 112 | S & F of mild steel work as in bands, straps, hold fast, wall ties, hooks for hanging fans, angle cleats & similar small articles conforming to Fe-410-0 or Fe-310-0, complete all as specified & directed. |
| 113 | S & F of galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.4 mm, complete all as specified & directed. |
| 114 | S & F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.4 mm, complete all as specified & directed. |
| 115 | S&F for Pressed steel frames for doors (125X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 116 | S&F for Pressed steel frames for doors (105X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 117 | S & F in repairs 300 mm long mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified & directed. |
| 118 | S & F of continous (piano) hinges mild steel 30mm width of flaps ,bright fuinish or electro galvanised, complete all as specified and directed. |
| 119 | S & F of aluminium anodized barrel tower bolts 150mm long, of extruded section, complete all as specified & directed. |
| 120 | S & F of aluminium handles 125 mm long, cast type, anodized, complete all as specified & directed. |
| 121 | S & F of 250mm Aluminium alloy anodised sliding door bolts with hasp,staple(bolt type)and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or aluminium alloy and fixed, complete all as specified and directed. |
| 122 | S&F of anodised aluminium window, ventilator shutters and kitchen cupboards, side hung type/ slidding type/Louvered Ventilator without sash bars, alumimium section weighing 0.35 kg/m including necessary joining cleats glazing clips, ruber packing, anodised aluminium snap beading screws anodised aluminium fittings such as ped stays 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified for add powder coating (minimum thickness of powder coating 50 micron). |
| 123 | S&F of anodised aluminium frame and shutter for doors and frame for windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron). |
| 124 | S&F of mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165, complete all as specified and directed. |
| 125 | S&F in repairs Sheet glass, ordinary quality and glazing with oil putty/ wooden beading/ or aluminium bidding in square/rectangular in each pane 4-4.5 mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture, complete all as specified and directed. |
| 126 | S&F of Sheet glass, ordinary quality and glazing with oil putty/ wooden beading/ or aluminium bidding in square/rectangular in each pane 4-4.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture. |
| 127 | S&F in repairs frosted Sheet glass, ordinary quality and glazing with oil putty in square/rectangular in each pane 4-4.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture. |
| 128 | S&F in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed. |
| 129 | S&F in repairs door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm long, complete all as specified and directed. |
| 130 | S&F as in repairs 200mm aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 131 | S&F as in repairs 150mm aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 132 | S&F as in repairs 300mm aluminium anodised sliding door bolt of extruded section, complete all as specified and directed. |
| 133 | S& F as in repairs 150 mm extruded aluminum alloy handles, fabricated type anodised, complete all as specified and directed. |
| 134 | S&F as in repair 100 mm Butt hinges, medium weight, cold rolled mild steel, fixed to steel frames with and including welding etc, complete all as specified and directed. |
| 135 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 136 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw as specied. |
| 137 | S&F of pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping, complete all as specified and directed. |
| 138 | Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and as directed. |
| 139 | S&F of rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165, complete all as specified and directed. |
| 140 | All as per item No 139.00 above but except material, complete all as specified and as directed. |
| 141 | S&F in repairs of magnet catches in cupboard/ kitchen cabinet to receive shutter and fixed with including fittings, complete all as specified and directed. |
| 142 | S&F in repairs 8 MM thick hollow PVC panelling consisting of alternate hollow section in wooden finish or any colour wall paneling inclusive of fixing on to wall, as per specifications and drawing all as specified and directed. |
| 143 | S & F of stainless steel butt hinges, 100 mm size, complete all as specified & directed. |
| 144 | S & F in repairs double legged door stopper of allluminium alloy with rubber, complete all as specified and directed. |
| 145 | S & F of 20/25mm mm dia fancy type Drapery Rod with rubber sleeves including brackets complete, of approved quality and all as directed including taking down existing curtain rod, complete all as specified & directed. |
| 146 | S & F of 19/20mm dia mild steel curtain rod including brackets, complete all as specified and directed. |
| 147 | S&F in repairs 25 mm dia SS fancy type drapery curtain rod with brackets and lattu & other connected accessories etc, complete all as specified and directed. |
| 148 | M&L for Aluminium grill of size of grid 75 mm x 75 mm x 5 mm thick and fixed with machine screw, complete all as specified and directed. |
| 149 | S&F in repair mortice lock of any shape size with three key lock of aluminium section with 3 lever section including fixing in same position, complete all as specified and directed. |
| 150 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 151 | S&F in repairs hydraullic door closer extruded section of approved quality shape and size to regulate door of min weight 50 kg, complete all as specified and directed. |
| 152 | S&F in repairs helical door spring in doors fixing on wooden frame with bolts and fixing with welding on steel farme including all fittings, complete all as specified and directed. |
| 153 | M&L for cleaning of over head water storage tanks (PVC/RCC) capacity 500 LTR, cleaning and removing all scale and dirt with bleaching powder or any other oxiding/cleaning chemical suitable for cleaning of water tanks, from tanks and from mouth of circulating pipes, etc and including one coat synthetic enamel paint on tank of size 450mmx300mm and writing letters (\\"CLD ON MM-YY\\") of height 7.5cm, complete all as specified and as directed. |
| 154 | All as per item No 153.00 above but capacity of tanks exc 500 Ltrs but not exc 1000 Ltrs, complete all as specified and directed. |
| 155 | S&F in repair autoclosing hydrolic (soft closing) chrome finish stainless steel hinge openable at 110 degree, complete all as specified and directed. |
| 156 | Easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each, complete all as specified and directed. |
| 157 | Easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 2 Sqm each, complete all as specified and directed. |
| 158 | Providing and fixing 10mm thick gypsum board ceilling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh will be included in the same item) including dismantling of existing, ceilling complete all as spd and directed |
| 159 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. |
| 160 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:- |
| 161 | (a) One light, fan, bell point controlled by one switch, complete all as specified and directed. |
| 162 | (b) One 3 pin switch socket outlet point 5 Amps on independent board, complete all as specified and directed. |
| 163 | (c) One 3 pin switch socket outlet point 5 Amps on same board with other switch, complete all as specified and directed. |
| 164 | All as per item No 160.02 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size, complete all as specified and directed. |
| 165 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC casing caping mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches, socket outlet and fan regulators etc, complete all as specified and as directed for the followings:- |
| 166 | (a) One light, fan, bell point controlled by one switch, complete all as specified and directed. |
| 167 | (b) One 3 pin switch socket outlet point 5 Amps on independent board, complete all as specified and directed. |
| 168 | (c) One 3 pin switch socket outlet point 5 Amps on same board with other switch, complete all as specified and directed. |
| 169 | All as per item No 162.02 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size, complete all as specified and directed. |
| 170 | Supply and fixing in repair Switch piano 6 amps, single pole, one way, 230 volts, complete all as specified and directed. |
| 171 | Supply and fix in repair Switch piano 16 amps, single pole, one way 230 volts, complete all as specified and directed. |
| 172 | Supply and fixing in repair Socket outlet 6 Amp 2 pin & 3 pin, flush type, complete all as specified and directed. |
| 173 | Supply and fixing in repair Socket out let, 16 amp and 6 amp, flush type, complete all as specified and directed. |
| 174 | Supply and fixing in repair Electronic fan regulator 5 step 230 volts,switch type, complete all as specified and directed. |
| 175 | Supply and fixing in repair Electronic fan regulator 5 step 230 volts, socket size, complete all as specified and directed. |
| 176 | Supply and fixing in replacement Switch socket combination 2 IN 1 3 PIN 6/16 Amp 220 Volt flush type, complete all as specified and directed. |
| 177 | Supply and fixing in repair Lamp holder, insulated body, with back plate 230 Volt suitable for batten fittings, complete all as specified and directed. |
| 178 | Supply and fixing in repair Capacitor 230 volt, 1 Mfd, complete all as specified and directed by Engr-in-Charge. |
| 179 | Supply and fixing in repair Switch modular type, 230 volts, single pole, one way, 10 Amp, one module, complete all as specified and directed. |
| 180 | Supply and fixing in repair Switch modular type, 230 volts, single pole, one way, 16 Amp one module, complete all as specified and directed. |
| 181 | Supply and fixing in repair Socket out let 5 pin, 10 Amp, 230 volts modular type, complete all as specified and directed. |
| 182 | Supply and fixing in repair Socket out let 5 pin, 10 amp & 20 amp, 230 volts modular type, complete all as specified and directed. |
| 183 | S&F in repair Modular Fan step regulator, 120W - 2 module, complete all as specified and directed. |
| 184 | S & F of ceiling rose surface backlite 65x50mm 3 terminals, complete all as specified and directed. |
| 185 | Supply & fixing in replacement PVC box comprising of switch socket combination multi - purpose 5 pin, 6/16 Amp box type, complete all as specified and as directed. |
| 186 | Supply & fixing in replacement PVC box comprising of switch socket combination multi - purpose 3 pin, 6 Amp box type, complete all as specified and as directed. |
| 187 | Supply and fixing in replacement calling bell ding dong type 220 volt 50 Htz, complete all as specified and directed. |
| 188 | Supply and fixing in repair LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2200 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed, complete all as specified and directed. |
| 189 | Supply and fixing in repair LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed, complete all as specified and directed. |
| 190 | Supply and fixing in repair 2x2 LED fitting recess mounting flate panel 36 watt, down light 240 volt 50 Htz 150 luumen/watt comprising driver locking arrangement prewired completely, complete all as specified and directed. |
| 191 | Supply and fixing in replacement 1.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade, complete all as specified and directed. |
| 192 | Supply and fixing in replacement 2.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade, complete all as specified and directed. |
| 193 | Supply and fixing in replacement 4.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade, complete all as specified and directed. |
| 194 | Supply and fixing in replacement 6.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade, complete all as specified and directed. |
| 195 | Supply and fixing in repair PVC gang box ISI marked three module for mounting one 5 amp socket & switch, complete all as specified and directed. |
| 196 | Supply and fixing in repair PVC gang box ISI marked three module for mounting one 15 amp socket & switch, complete all as specified and directed. Make plaza/Anchor. |
| 197 | Supply and fixing in repair PVC gang box ISI marked six module for mounting two 5 amp socket & two switch, complete all as specified and directed. |
| 198 | Supply and fixing in repair PVC gang box ISI marked 9 module for mounting three 5 amp socket & three switch, complete all as specified and directed. |
| 199 | Supply and fixing in replacement white cover plate with frame three module for modular switches and sockets, complete all as specified and directed. |
| 200 | Supply and fixing in replacement white cover plate with frame six module for modular switches and sockets complete all as specified and directed. |
| 201 | Supply and fixing in replacement white cover plate with frame twelve module for modular switches and sockets, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 202 | Supply and fixing in replacement white cover plate with frame twelve module for modular switches and sockets, complete all as specified and directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
