|
| 1 | Dismantling of brick work of stone work in lime or cement mortar and including stacking of material as directed by the engineer-in-charge within a distance of 60m. as per PWD SOR SI No. 692 (Including Labour Cess but GST will paid extra as applicable) |
| 2 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 Sr No.3.4 (Including Labour Cess but GST will paid extra as applicable) (Diversion) |
| 3 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with Approved Material. Specification No. 304 S.N. 12.01(i)B (Ordinary Soil) (Including Labour Cess But GST will paid extra as applicable) |
| 4 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.Specification No 2100 Sl No. 12.04 and sub analysis No. 21.02 (Including Labour Cess But GST will paid extra as applicable) |
| 5 | RCC Grade M30 Using Batching Plant, Transit Mixer and Concrete Pump.as per drawing and Technical specification. specification. No SI. No. -1500, 1700 & 2100 Sl No. 12.08 G (Case-i) and sub analysis No. 21.09 (Including Labour Cess But GST will paid extra as applicable) |
| 6 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. 1600 Sr no. 12.42 (Including Labour Cess but GST will paid extra as applicable) |
| 7 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V) : 20(H) towards drawing face complete As per MORD Specification as per drawing and technical specification Clauses 2706 & 2200 & Sr no. 15.14 (Including Labour Cess but GST will paid extra as applicable) |
| 8 | Boulder Apron Laid dry without Wire Crates- Providing and laying of boulder apron on river bed for protection against scour with stone boulders weighing not less than 40kg each complete as per drawing and MoRTH Specification. 2503 & Sr no. 16.01 (Including Labour Cess but GST will paid extra as applicable) (For Protection Work) |
| 9 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 Sr No.3.4 (Including Labour Cess but GST will paid extra as applicable) (cartage Earth) (Approach road) |
| 10 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Sr No.3.14 (Including Labour Cess but GST will paid extra as applicable) (cartage Earth) (Approach road) |
| 11 | GSB- Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader/Tractor mounted appropriate equipment on prepaire suface mixing by mix in place method with rotavator at OMC, and compacting with smooth roller to achieve the desired density, complete as per clause 401 Sr No. 4.1 (Below Raft & Approach road)) (Including Labour Cess but GST will paid extra as applicable) |
| 12 | WBM-II Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. Sr.No. 4.7(2)(A) By Manual Means. (Including Labour Cess but GST will paid extra as applicable) (Approach road ) |
| 13 | WBM-IIIProviding, laying, spreading and compacting stone aggregates of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, screening Type-C to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405(3). Sl No. 4.7 (Including Labour Cess but GST will paid extra as applicable) (Approach road ) |
| 14 | Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 Sr.No. 5.1(i). (Including Labour Cess but GST will paid extra as applicable) (Approach road) |
| 15 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.35kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom As per MORD Specification & Clause no 503, 5.2 (Including Labour Cess but GST will paid extra as applicable) (Approach road) |
| 16 | Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing coarse on a previously Prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity finished to required lavel and grades to be followed by seal coat As per MORD Specification 508 & Clause 5.9 (Including Labour Cess but GST will paid extra as applicable) (Approach road) |
| 17 | Providing and applying seal coat type \\"C\\" comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kN Static roller and finishing to required level and grades As per MORD Specification 510 5.& Clause 5.12 (Including Labour Cess but GST will paid extra as applicable) (Approach road) Please Enable Macros to View BoQ information |
