|
| 1 | SANITARY INSTALLATIONS & C.P FITTINGS |
| 2 | Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and makinggood the walls and floors wherever required. |
| 3 | White Vitreous china Orissa pattern W.C. pan of size580x440mm with integral type foot rests |
| 4 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 5 | W.C. pan with ISI marked black solid plastic seat and lid |
| 6 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the wallswherever required. |
| 7 | a)White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C.P. brass pillar taps |
| 8 | Providing and fixing P.V.C. waste pipe for sink or wash basinincluding P.V.C. waste fittings complete. |
| 9 | Semi rigid pipe |
| 10 | 32 mm dia |
| 11 | 40 mm dia |
| 12 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. |
| 13 | Providing and fixing PTMT Bottle Trap for Wash basin andsink |
| 14 | Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimumwater seal, weighing not less than 263 gms |
| 15 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing notless than 105 gms. |
| 16 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality andcolour. |
| 17 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not lessthan 190 gms. |
| 18 | Providing and fixing unplasticised PVC connection pipe withbrass unions |
| 19 | 45 cm length |
| 20 | 15 mm nominal bore |
| 21 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 22 | a) 15 mm nominal bore |
| 23 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 24 | a) 15 mm nominal bore |
| 25 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 |
| 26 | a) 15 mm nominal bore |
| 27 | Providing and fixing C.P. brass shower rose with 15 or20mm inlet |
| 28 | 100 mm diameter |
| 29 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming toIS:8931: |
| 30 | 15mm nominal bore |
| 31 | Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring /ground) |
| 32 | 100 /90 mm dia |
| 33 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mmgap for thermal expansion. |
| 34 | 110 mm |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction ofEngineer in Charge. |
| 36 | Concealed work including cutting chases and making goodthe walls etc. |
| 37 | 20mm dia nominal outer dia pipes |
| 38 | 25mm dia nominal outer dia pipes |
| 39 | 32mm dia nominal outer dia pipes |
| 40 | Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc.(internal work). |
| 41 | Internal work-Exposed on wall |
| 42 | 25mm dia nominal bore |
| 43 | 32mm dia nominal bore |
| 44 | 40mm dia nominal bore |
| 45 | 50mm dia nominal bore |
| 46 | Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc.complete (new work). |
| 47 | 25mm dia nominal bore |
| 48 | 32mm dia nominal bore |
| 49 | 40mm dia nominal bore |
| 50 | 50mm dia nominal bore |
| 51 | Providing and fixing gun metal gate valve with wheel ofapproved quality. |
| 52 | 25mm dia nominal bore |
| 53 | 32mm dia nominal bore |
| 54 | 40mm dia nominal bore |
| 55 | 50mm dia nominal bore |
| 56 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus orequivalent having valid ISI license]. |
| 57 | Capcity in Per Liters |
| 58 | Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a leadof 50m. |
| 59 | All kinds of soil |
| 60 | Pipes, cables etc. exceeding 80mm dia but not exceeding300mm. |
| 61 | Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc.complete. |
| 62 | 100mm diameter |
| 63 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as perstandard design |
| 64 | 100mm dia SW pipe |
| 65 | Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation7.5 |
| 66 | SEPTIK TANK |
| 67 | Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. (Rate is including Royality). |
| 68 | From 0.00 mt to 1.50 mt |
| 69 | 1.50mt to 3.0 mt |
| 70 | PCCProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 71 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).As in item no. 3 above but for slabs (Using 1:1.5:3 Mix concrete) |
| 72 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1cement : 4 coarse sand) |
| 73 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 74 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thickfloor). |
| 75 | 15mm cement plaster on rough side of mix 1:4 (1cement : 4 coarse sand) |
| 76 | Providing and fixing soil, waste and vent pipes :75mm diameter : Sand cast iron S&S pipe as per IS: 1729 |
| 77 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as perstandard design:(With 20x20mm square bar) |
| 78 | Making soak-pit 2.5 m. diameter and 3 m. deep with 45 x 45cm dry brick honey comb shaft withF.P.S bricks and SW drain pipe complete as perstandard design. |
| 79 | GST will be paid extra as per GST Notification Please Enable Macros to View BoQ information |
