|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for non skid ceramic coloured tiles, 6 to 7mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, fixed as on floors, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 3 | M&L for non skid ceramic coloured tiles, 6 to 7mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, fixed as on floors, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 4 | M&L for glazed ceramic coloured tiles fixed as on vertical surfaces, such as dado/skirting, etc., of size 350x250x7mm/ 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed. |
| 5 | S&F as in repairs for 15mm dia bib taps, cast copper alloy, fancy type, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 6 | S&F as in repairs angle cock of size 15mm dia, fancy type, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 7 | S&F as in repairs vitreous china squatting pan, ‘Orissa’ pattern, white of size 580x440mm as approved, with integral foot rests (excluding flushing cistern and flush pipe) including trap set and concrete including connection to trap and to flushing pipe, anti syphonage pipe, etc. complete including making good to floors with 150mm thick lime concrete bedding (1:5:10) type E-2 (using 40mm nominal brick ballast) and connection to trap with cement mortar and making good to floor including demolition of PCC/lime concrete bedding for existing pan complete all as specified and as directed. |
| 8 | S&F as in repairs vitreous china wash down water closet pan (Pedestal pattern), white including fixing bolts (excluding flushing cistern and flushing pipe) with plastic water closet seat, black, closed pattern with recessed bottom and over including mild steel chromium plated aluminium hanging device and including taking out unserviceable WC and making good to disturbed surfaces with cement mortar (1:3) complete all as specified and as directed. |
| 9 | S&F as in repairs PVC flushing cistern of 10 litre capacity, low level, valveless, symphonic action type. white, with inlet, ball valve, float and handle including 32mm dia PVC flush pipe including brackets cutting and pinning in ends, including making good to disturbed surfaces in cement mortar (1:3) including taking down old existing unserviceable flushing cistern and connected items complete all as specified and as directed. |
| 10 | S&F as in repairs PVC seat cover for EWC matching colour complete with MS hinged chromium plated or aluminium hinging device complete all as specified and as directed. |
| 11 | S&F as in repairs vitreous china wash hand basin of size 550x400mm (flat back or angle back type), 'white' with 32mm dia brass chromium plated waste fitting, galvanised iron \\"light grade\\" 32mm bore waste pipe, a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good to distrurbed surfaces in cement mortar (1:3) inlcuding taking down old existing unservicable wash hand basin and connected items complete all as specified and as directed. |
| 12 | S&F as in repairs looking mirror of size 600mmx450mm beveled edge of selected quality glass, fixed with PVC moulded frame, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 13 | S&F as in repairs 20mm dia tubular towel rail, 'D' type, 60cm long between flanges brass chromium plated complete all as specified and as directed. |
| 14 | S&F sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long embedded in walls complete all as specified and as directed. |
| 15 | S&F as in repairs chromium plated (CP) toilet paper holder fixing with chromium plated brass screws complete all as specified and as directed. |
| 16 | S&F as in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 17 | S&F as in repairs fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 18 | S&F as in repairs grating doom 125mm dia with waste hole of PTMT. (Minimum weight 40gms) fixed in floor including making good disturbed surfaces in cement mortar (1:3) complete all as specified and as directed. |
| 19 | Taking up or down 15mm dia steel water tubing including connections with fittings complete all as specified and as directed. |
| 20 | All as per Serial item No. 19 here-in-before but 20mm dia. |
| 21 | S&F 15mm dia GI steel water tubing, \\"medium grade\\" with all fittings, fixed to walls, ceiling or laid in floor complete all as specified and as directed. |
| 22 | All as per Serial item No. 21 here-in-before but 20mm dia. |
| 23 | S&F as in repairs rotational moulded polyethylene (HDPE) water storage tank of capacity 500 litres, three layered, white coloured (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. |
| 24 | S&F as in repairs 20mm dia ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe complete all as specified and as directed. |
| 25 | S&F as in repairs vitreous China urinals, flat back type of size 465x355x265mm white (min) with grating union union for discharge pipe including urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60gms) but excluding flushing cistern, flush pipe and waste pipe but fixing only automatic flushing cistern with bracket, flush pipe, etc. complete all as specified and as directed. |
| 26 | Taking down shutters of any description exc. 1 sq.m but not exc. 2 sq.m each and refixing the same in the same opening after taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed. |
| 27 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed. |
| 28 | Taking down cement plaster of any description on brick walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 29 | M&L for 15mm thick rendering in cement mortar (1:6) plaster on other than fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and as directed. |
| 30 | M&L for 15mm thick rendering in cement mortar (1:4) plaster on fair faces of brick wall with mixing WPC @ 3% by weight of cement, finished fair and even without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately. |
| 31 | M&L for 10mm thick rendering in cement mortar (1:3) plaster on brick or concrete surfaces as on ceiling, finished fair and even without using extra cement complete all as specified and as directed. |
| 32 | M&L for preparation of new plastered sufaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 33 | M&L for preparation of new plastered sufaces of walls and applying two coats of cement base paint over and including one coat of approved primer complete all as specified and as directed. |
| 34 | M&L for preparation of new plastered sufaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 35 | Demolition of brick work built in cement mortar includingall quoins, arches, pillars, etc. of any description complete all as specified and as directed. |
| 36 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan exc. 6m mean radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed. |
| 37 | M&L for brick work with sub-class 'B' bricks, one brick thick walls, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:4) complete all as specified and as directed. |
| 38 | S&F for steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed. |
| 39 | M&L for vitrified ceramic coloured tiles, 10mm thick (Square/rectangular) polished, \\"light shade\\", area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floor, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match with the tile laid, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 40 | M&L for vitrified ceramic tiles, 10mm thick (Square/ rectangular), polished, light shade or any shade, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as on dado/skirting, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match the surfaces of tiles, over and including 10mm thick screed bed in cement mortar (1:3) complete all as specified and as directed. |
| 41 | S&F as in repairs sinks with drainage board, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 42 | M&L for preparation of old decorated plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed. |
| 43 | S&F as in repairs PVC connection of 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed. |
| 44 | Taking down chowkat or frame with shutter (without taking off shutters from the frame) of area exc. 1.5 sq.m and not exc. 4 sq.m each complete all as specified and as directed. |
| 45 | All as per Serial item No. 44 here-in-before but area n. exc. 1.5 Sqm each. |
| 46 | M&L for 2nd class hard wood plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed |
| 47 | S&F 35mm thick factory made 2nd class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 48 | S&F 35mm thick 2nd class hard wood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.20 (a); and fitted to chowkats complete all as per specified and as directed. |
| 49 | S&F solid PVC door frame of size 50mmx47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, and fixing in opening as per specifications and drawing shown in SSR Part-II complete all as specified and as directed. |
| 50 | S&F factory made solid panel PVC door shutter, 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded palin colour PVC ''C\\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on on either side and as gap insert for top rail and bottom rail. Panellining of plain colour PVC sheet to be fitted in the MS frame welded/sealded to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specifications and shown on drawing in SSR Part-II complete all as specified and as directed. |
| 51 | S&F 100mm long butt hinges, \\"medium weight\\", cold rolled, stainless steel complete all as specified and as directed. |
| 52 | S&F extruded aluminium alloy handles of size 150mm, fabricated type, anodised complete all as specified and as directed. |
| 53 | S&F aluminium anodised barrel tower bolt of size 150mm long, extruded section complete all as specified and as directed. |
| 54 | S&F aluminium alloy, anodised, sliding door bolt of size 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 55 | S&F as in repairs hydraulically regulated door closer, aluminium body, heavy duty, designation No. 3, universal type, suitable for door shutter 851 to 1000mmin width and weighing between 61 Kg to 80 Kg complete all as specified and as directed. |
| 56 | S&F as in repairs 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 57 | Dismantling of stone slab and tiles of any description or thickness in floors, footpath, aprons or in shelves, platform, etc. bedded and pointed in any mortar complete all as specified and as directed. |
| 58 | M&L for 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying of granite slab, etc. complete all as specified and as directed. |
| 59 | M&L for granite slab 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 60 | S&F 75mm bore PVC (SWR) soil, waste and ventilating pipes, single socketed in any length with rubber ring joints, fixed to walls with MS clamps complete all as specified and as directed. |
| 61 | All as per Serial item No. 60 here-in-before but of 110mm bore dia |
| 62 | M&L for 40mm thick cement concrete type B-0 (using 12.50mm graded stone aggregate) as in flooring/hard surface complete all as specified and as directed. |
| 63 | M&L for forming contraction (Dummy) joints 65mm (deep) x 10mm (wide), filled with sealing compound of Grade 'B' complete all as specified and as directed. |
| 64 | M&L for brick work with sub-class 'B' bricks (old size bricks), one brick thick walls, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 65 | M&L for RCC (nominal mix) (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 66 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) and making flat rough finished surfaces of concrete complete all as specified and as directed. |
| 67 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 68 | M&L for 75 mm thick plain cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) used as in flooring complete all as specified and as directed. |
| 69 | M&L for 50mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, finishing surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 70 | S&F for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed. |
| 71 | M&L for preperation of new steel surface over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 72 | M&L for 10mm thick rendering in cement mortar (1:6) plaster on fair faces of brick wall or concrete surfaces, finished fair and even without using extra cement complete all as specified and as directed. |
| 73 | M&L for TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 74 | S&F 20mm thick pre-laminated particle board, factory laminated on both sides with decorative laminate, confirming to IS:12823 of approved make and shade including cutting to required sizes, edge banding with matching PVC/laminate tape, fixing with approved screws, adhesives and necessary fittings complete all as specified and as directed. |
| 75 | S&F magnetic catcher of approved make and size including necessary screws and fittings complete all as specified and as directed. |
| 76 | S&F 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 77 | S&F medium weight cold rolled mild steel butt hinges 75mm long complete all as specified and as directed. |
| 78 | S&F extruded aluminium alloy handles of size 100mm, fabricated type, anodised complete all as specified and as directed. |
| 79 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed. |
| 80 | M&L for vitrified ceramic coloured tiles, 10mm thick (Square/rectangular), polished, light shade or any shade, area of each tile not exceeding 0.36 sqm, as in dado/skirting, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match the surfaces of tiles, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 81 | S&F sinks with drainage board, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 82 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws complete as per architectural drawings complete all as specified and sa and directed. |
| 83 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 84 | M&L for 4mm thick composite panel interior anti bacterial types (AL32) fixing to aluminium partition/door member complete all as specified and as directed. |
| 85 | S&F 5.0mm thick sheet glass, but not exc. 0.5 Sqm in each pane of selected quality as in panel of door/window with necessary fitting complete all as specified and as directed. |
| 86 | S&F hydraulically regulated door closer, aluminium body, heavy duty, designation No 3, universal type, suitable for door shutter 851 to 1000mm in width and weighing between 61 Kg to 80 Kg complete all as specified and as directed. |
| 87 | S&F aluminium anodised barrel tower bolt of size 200mm long, extruded section complete all as specified and as directed. |
| 88 | S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 89 | M&L for 15mm thick rendering in cement mortar (1:4) plaster on fair faces of brick work or concrete surfaces in wall with mixing WPC as per manufacturer instruction and finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 90 | Supply only integral water proofing compound conforming to IS Code and approved make complete all as specified and as directed. |
| 91 | M&L for preparation of new plastered sufaces of walls and applying two coats of cement base paint over a coat of 2mm wall care putty complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 92 | M&L for preparation of new plastered sufaces of walls and applying two coats of cement base paint over a coat of 2mm wall care putty complete all as specified and as directed. Please Enable Macros to View BoQ information |
