|
| 1 | Taking down care fully copper/aluminium point wiring from caping/casing or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge. |
| 2 | Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. |
| 3 | Taking down old submain wiring of any size, including coduit and make from the site complete all as specified. |
| 4 | Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified. |
| 5 | Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed / surface PVC conduits as suitable of site (Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, 3 mm thick hylem sheet cover for terminal boxes painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories for PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. |
| 6 | All as per item No 5 above but one light/fan point controlled by one switch. |
| 7 | All as per item No 5 above but One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 8 | All as per item No 5 above but One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 9 | All as per item No 5 above but One bell point controlled by one bell push. |
| 10 | All as per item No 5 above but One light point controlled by two Nos two way switches |
| 11 | All as per item No.5 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 15 Amps socket out let on independent board. |
| 12 | M&L switch piano flush type 5 Amp SP one way ISI marked complete all as specified. |
| 13 | M&L switch piano flush type 5 Amp SP two way. |
| 14 | M&L switch piano flush type 15 Amp SP one way ISI marked complete all as specified. |
| 15 | M&L bell push,flush type,5 amp ISI marked complete all as specified. |
| 16 | M&L socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified. |
| 17 | M&L socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified. |
| 18 | M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified. |
| 19 | S & F electronic fan regulator 5 step ISI marked connecting complete all as specified. |
| 20 | M&L bell electric (ding dong) 230 volt, SP all as specified and directed. |
| 21 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including in and including concealed / surface PVC conduits as suitable of site Medium grade of ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified. |
| 22 | All as per item No 15 above but one light /Ceiling fan/exhaust fan point controlled by one switch. |
| 23 | All as per item No 15 above but one bell point controlled by one bell push. |
| 24 | All as per item No 15 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 25 | All as per item No 15 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 26 | All as per item No 15 above but one light point controlled by two Nos two way switches |
| 27 | M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.0 sqmm FRLS 1100 Volts in and including concealed / surface PVC conduits as suitable of site (Medium grade) of ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4.0 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified |
| 28 | M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified. |
| 29 | M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified. |
| 30 | M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified. |
| 31 | M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified. |
| 32 | M&L switch bell push Modular type 6 Amps 1W-1 module, ISI marked 230V AC complete all as specified. |
| 33 | M&L switch modular type 6 amp SP two way ISI marked complete all as specified. |
| 34 | Supply & Fix Modular five stepped type electronic fan regulator 2 module ISI marked 230V AC complete all as specified. |
| 35 | M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including in and including concealed / surface PVC conduits as suitable of site (Medium grade) not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire. |
| 36 | M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including concealed / surface PVC conduits as suitable of site (Medium grade) of not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6.0 Sqmm size stranded conductor as earthwire. |
| 37 | M&L for submain wiring with four run of single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including concealed / surface PVC conduits as suitable of site (Medium grade) of not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed one run of stranded copper conductor cable of 10 Sqmm size stranded conductor as earthwire. Note:- Four run of main wire PVC insulated FRLS 1100 volts unsheathed stranded copper conductor and one run of earth wire with one run of PVC conduit will be measured and paid in one length. |
| 38 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 200 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. |
| 39 | Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 200 to 270 volts AC, temperature range 0 to 50 Degree C, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. |
| 40 | Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 200-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 2.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete. |
| 41 | S& F in replacement recessed mounting LED FLAT panel 2\\"x2\\" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 200-270V, Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed. |
| 42 | Supply and fix 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100lm/W with a life class of 25,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 200-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete. |
| 43 | S & F in replacement of decorative type wall mounted luminaire (comet) with under take poly carbonate material suitable for 1 x 12 watts LED bulb B-22 base complete all as specified and as directed (Note : 01 piece of LED Bulb rate included in the fittings). |
| 44 | Supply and fix surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 920 Lumen /Min, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete. Note :Rate of 01 Nos LED buld of capacity 12 watts included this light fittings. |
| 45 | S&F angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete. |
| 46 | S & F LED bulb 12 watts, 900 lumens output, 6500K suitable for B-22 base . |
| 47 | Refixing of Ceiling fan / exhaust fan/ fresh air including taking down after necessary repairs/ replacement of unserviceable/ wornout part and testing the same as per entire satisfaction of Engr-in- Charge complete all as specified and directed. Note- Spare Parts shall be measured and paid separately under relevant item of supply only. |
| 48 | M&L for opening up the winding of ceiling fan 1200 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Teating of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge. |
| 49 | S&F in replacement capacitor of 3.15 MFD. |
| 50 | S&F in replacement gun metal bush of any size and make sutiable for ceiling fans 1200 mm compete all as specified and directed. |
| 51 | S&F in replacement ball bearing No. 6202./6203 |
| 52 | S&F in replacement worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as directed. |
| 53 | S&F Ceiling fan blade suitable for 1200mm sweep of any make with suitable size as per site requirement complete all as specified and directed. |
| 54 | M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dust etc.and endorsement of fan no.with black synthetic enamel paint complete all as directed. |
| 55 | S&F in replacement exhaust fan copper motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as directed. |
| 56 | S&F in replacement exhaust fan copper motor capacity 230 volts, AC, 50 Hz suitable for 450 mm size exhaust fan complete all as directed. |
| 57 | S&F in replacement fresh air fan copper motor capacity 230 volts, AC, 50 Hz suitable for 200/250 mm size fresh air fan complete all as directed. |
| 58 | Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed. Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only. |
| 59 | S&F in replacement only base plate assembly (confirming to ISI ) complete for 25/35 Ltrs capacity copper tank geyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusive of clamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site as directed. |
| 60 | S&F in replacement of thermostat for 25/35/50 ltrs capacity of geysers complete all as directed. |
| 61 | S&F in replacement heating element of 2 KW triangular type with nut bolt washer complete all as directed. |
| 62 | M&L for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge. |
| 63 | M & L chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed. |
| 64 | Supply only inner still tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as directed. |
| 65 | Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complet. |
| 66 | M&L MCB SPN 40 Amp \\"C \\" curve all as directed. |
| 67 | M&L MCB SP 6 to 32 Amp \\"C\\" curve all as directed. |
| 68 | Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-54 protection), mechanical impact strength IK - 09, with cement spill protector double door fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified Note :- MCCB & MCB will be measured & paid separately. |
| 69 | Supply only in repairs MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting. |
| 70 | Supply only in repairs MCCB 125 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting. |
| 71 | Supply only in repairs MCCB 100 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting. |
| 72 | S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete. |
| 73 | Supply & Fixing in replacement modular mini AC box with MCB 20 Amp complete with metal box and 3 Pin, 15 Amps plug top complete all as specified and directed. Make : Indo Asian/Havells/Legrand/ABB Note : Rates are inclusive of cutting / chases for mounting Modular metal box concealed in wall and making good to the disturbed surfaces with OBD / colour wash / white wash and wall putty where ever is required. |
| 74 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed |
| 75 | Supply & Fix all accessories of PCB BLDC ceiling fan including remote any type, any make & any capacity including taking down carefully ceiling fan & refixing the same as per requirement at site complete all as specified & directed by Engineer-in- Charge |
| 76 | S & F PVC canopy upper & lower of ceiling fan of any size & make complete with nuts, bolts & washers complete all as specified & directed by Engineer-in-Charge |
| 77 | Taking down old unsv downrod and S & F 1.5/2 feet long Ceiling fan rod (as per sire requirement) duly made out of mild steel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified & directed. |
| 78 | Taking down old unsv down rod and S & F 3 feet long Ceiling fan rod (as per sire requirement) duly made out of mild steel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified & directed. |
| 79 | Taking down old unsv ceiling fan rotor & S and F new rotor of ceiling fan of any sweep & make & making in good condition complete all as specified & directed. |
| 80 | S & F in replacement only of ceiling fan housing body parts complete all as specified and as directed by Engineer-in-Charge |
| 81 | S & F in replacement only spring of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 82 | S & F in replacement only motor screw of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 83 | S & F in replacement only capacitor clamp of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 84 | S & F in replacement only blade screw of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 85 | S & F in replacement only rubber clamp of ceiling fan with nuts, bolts & washers & safety pin complete all as specified and as directed by Engineer-in-Charge |
| 86 | S & F in replacement PVC cable copper conductor multistranded flexible wire 23/0.0076 twin core & making connection from ceiling rose to fan complete all as specified and as directed by Engineer-in-Charge |
| 87 | Taking down old unsv ceiling fan starter & S and F new starter of ceiling fan of any sweep & make & making in good condition complete all as specified & directed by Engineer-in-Charge. |
| 88 | S&F exhaust fans AC single phase 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with blade, frame & louvers for fixing of exhaust fan complete. |
| 89 | S&F exhaust fans AC single phase 230/240 V of size 450 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with blade, frame & louvers for fixing of exhaust fan complete. |
| 90 | S&F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge. |
| 91 | S & F wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply & Fix in replacement fresh air fan blade any make, any capacity as requirement at site all asspecified & directed. |
| 93 | Supply & Fix in replacement exhaust fan fan blade any make, any capacity as requirement at site all asspecified & directed. |
| 94 | Supply & Fix in replacement fresh air fan PVC cup/check nut as requirement at site all asspecified & directed. |
| 95 | Supply & Fix in replacement Rechargeable bulb of capacity 15 watts as requirement at site all asspecified & directed. |
| 96 | S & F in replacement water heater storage type Geyser ABS body vertical type with suitable size of fastner and including provision and connecting up of SS braidedpipe with adopter for inlet and outlet water connection having adjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 2 KW and not less than 5 star rating, suitable for, 230 volt, 50 Hz electric supply complete all as specified and directed . |
| 97 | Supplying & Fix in replacement 1100 volts grade 6 sqmm heavy duty stranded cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular |
| 98 | Supply and fixing of outdoor type luminaire post top luminrare (prince opera midi) of 240 v,50hz of capacity 40 watt LED luminare ip 65 suitable for mounting on 6 0mm OD pipe on necessasry PCC works incl all fixing arrangaement complete all as specified and directed Make :Cat Part No : LPTO-40-CDL-M of CG or equivalent in Philips/C&S Cat Part No : LTGLC40WHPLED/W |
| 99 | Supply and fixing LED Bollard with round top 10 W ,220V 50Hz with opal acrylic IP 65 protection along with necessary PCC foundation cable condits for loop in and out , cable connectors complete all as specified and directed Make Cat No. LBLSN-10-CDL of Crompton graves or equivalent in Bajaj / Havells/Philips 58167 YOB PEDESTAL |
| 100 | Schedule of Credit Please Enable Macros to View BoQ information |
