|
| 1 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 2 | IRON STEEL SCRAP |
| 3 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-13 mtr. Long = 482.3 kg |
| 4 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg |
| 5 | ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) |
| 6 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 7 | Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) |
| 8 | Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) |
| 9 | Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) |
| 10 | Copper Control Cable 2.5 Sq.MM 10 Core(Unarmoured) |
| 11 | 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps |
| 12 | 11 KV Single Phase PTs. (Resin Molded) |
| 13 | 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel |
| 14 | 11 KV control & relay panel with numerical static relay for double feeder protection |
| 15 | 11 KV, ISOLATOR 600 AMP.(Turn and twist type) |
| 16 | 11 KV Composite Polymer AB Switch Horizontal Movement type |
| 17 | 9 KV Gapless type(5 KA) polymer lightening arrestor |
| 18 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 19 | M S Channel 100X50x6 mm |
| 20 | M S Angle 65X65X6 mm |
| 21 | 11 KV Top clamp 65X65X6 mm. angle type |
| 22 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 23 | Danger Boards Enamelled 11 KV |
| 24 | Danger Boards Enamelled 33 KV |
| 25 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 26 | 33 KV (45KN) Composite Polymer Disc Insulators |
| 27 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 28 | 11 KV Strain hardware (T&C type) fittings |
| 29 | 3 phase 4 wire 3x63.5 volts lb=5 amps Imax = 10 amp, HT trivector meter class of accuracy 0.5s, DLMS Compliant category A Meters along with GSM (GPRS compatible ) modems (For substation metering) |
| 30 | 3Ph 4W 3x63.5V lb=5A Imax=10A, HT trivector meter,0.5s,(For Consumer metering) |
| 31 | Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP |
| 32 | 33 KV composite polymer Strain set with hard ware suitable for Panther Conductor |
| 33 | M.S.Flat 50x6 mm |
| 34 | Red oxide paint |
| 35 | Aluminium paint |
| 36 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 37 | Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole |
| 38 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 39 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 40 | M.S.Nuts with Bolts |
| 41 | Jointing Sleeves suitable for Raccoon (80Sq.mm.Al. Eq.) AAAC conductor |
| 42 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 43 | Aluminium Binding wire and tape |
| 44 | MS strain plate 65x8mm 250mm long |
| 45 | Stay Insulators 90X65mm |
| 46 | Stay Wire 7/3.15 mm.(7/10 SWG) |
| 47 | Stay set complete without Stay wire 16 mm. (Painted) |
| 48 | Stay set 20 mm. complete without Stay wire (Painted) |
| 49 | Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay |
| 50 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 51 | Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth |
| 52 | Concreting of structures & foundation (1:3:6). |
| 53 | Erection of Plinth per VCB- 33KV or 11KV |
| 54 | Stringing of Each 11 KV Bus-upper and lower bus including, drop jumpering and jointing with clamps,through outgoing VCB/ ME/ DP, upto station transformer |
| 55 | Concreting of Rail / Hbeam supports @0.65 Cmt.per pole including muffing of pole |
| 56 | G.I.Pipe 40 mm Dia C grade type |
| 57 | Galvanized nut & bolt with washer |
| 58 | G.I. STRIP 25X3 MM1 |
| 59 | Bentonite compound powder |
| 60 | Marshelling box with 10 no. connectors |
| 61 | Meter box with TTB |
| 62 | T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG |
| 63 | LT distribution box with 1.2 mm thick MS powder coated sheet, 200 A MCB on incoming & 6 no. 125 A HRC fuse base including 100 A HRC fuse , For 100 KVA Transformer |
| 64 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 65 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 66 | Additional Erection Charge |
| 67 | Dismentelling |
| 68 | CONDUCTOR ACSR SCRAP ( Return Material SIDE TO AREA STORE BHOPAL) |
| 69 | IRON STEEL SCRAP ( Return Material SIDE TO AREA STORE BHOPAL) |
| 70 | Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the items like V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid. |
| 71 | Transportation Charges for All Equipments & Materials from area store to site & Site to Area store Bhopal |
| 72 | GST on Transportation @5% |
| 73 | GST on (Contractor side Material + Labour) @18% Please Enable Macros to View BoQ information |
