|
| 1 | Item Description |
| 2 | Cleaning all type of roofs/chajjas including removal of dry leaves, weeding, cleaning drain holes, brooming etc. all complete with tools and tackles and stacking the garbage at the specified places as per instruction of EIC. (This rate includes tools and tackles required for accessing all the specified locations)(Analysed rate) |
| 3 | Cleaning and mopping floors of office buildings and all other allied places neatly including cleaning of wall ceiling, partitions, staircases, verandahs, balconies, window glass panes, small drain adjoining plinth protection etc. with phenyl, detergent, bleaching powder etc. all complete with tools and tackles to make the floors/space clean and hygenic as per the direction of Engineer-in-charge.(This includes supply of appropriate tools/tackles and phenyls, detergents, bleaching powders, other consumables)Including proper uniform (dress) for workers (Analysed rate) |
| 4 | Cleaning of general/common/attached bathrooms and toilets/lavatories including cleaning of dado, skirting , WC pan (indian /western type) wash basins, urinals etc. by hand dusting and cleaning with soap solution, toilet cleaning solvent (Harpic or equivalent), deodrants, phenyl etc. to make the toilet clean and hygenic including providing napthalene balls in urinals & wash basins, bathroom freshner (Odonil or equivalent) all complete as per the direction of Engineer-In-Charge.(This includes supply of appropriate tools/tackles, gloves, masks and consumables like phenyls, toilet cleaning solvent (Harpic or equivalent), detergents, naphthalene balls and other consumables)Including proper uniform (dress) for workers (Analysed rate) |
| 5 | Cleaning and dusting of door shutters including chowkhats, window grills, glass panels, table tops, cupbords etc. by dusting and vacuum cleaning of auditorium chairs, floor carpet , wooden flooring , wall panelling and curtain in acoustic works etc in service/community buildings/convention centre as per the direction of Engineer-In-charge Including proper uniform (dress) for workers (Analysed rate) |
| 6 | Providing spray air freshner (Air pocket or equivalent)-220 ml as per instruction of EIC. (Analysed rate) |
| 7 | Providing urinal screen mat as per instruction of EIC. (Analysed rate) |
| 8 | Providing and carrying out Advanced Rodent Management (RODEX Treatment) for effective control of rats and mice, using approved and registered rodenticides, designed with due consideration to human safety. The treatment shall be based on the type of rodent species, extent of infestation, and spread of infestation, complete rodent control.The treatment shall include a combination of baiting, trapping, and proofing methods. Proofing against rodent entry shall be carried out by the department/client as per recommendations. Hit bait (Bromadiolone 0.025%), a single-dose anticoagulant rodenticide, shall be used. The bait shall be placed at strategic locations in specially prepared, tamper-resistant bait stations, with lock-and-key arrangements wherever required, complete in all respects and as per the directions of the Engineer-in-Charge (EIC). (Analysed rate) |
| 9 | Providing and carrying out cockroach control treatment using new-generation Fipronil-based gel, a highly effective and safe insecticide, applied by trained IMSS experts. The gel shall act through ingestion and contact, creating a cascade/domino effect for complete colony elimination with faster visible results. The treatment shall be applied at harbourages, cracks, crevices, and dark and dry areas, and in locations not regularly washed with water. The gel is non-volatile and shall not release airborne active ingredients, thereby minimizing exposure to applicators, occupants, and the environment. The treatment shall be effective against cockroaches only, complete in all respects, as per the directions of the Engineer-in-Charge (EIC). (Analysed rate) |
| 10 | Providing and carrying out anti-termite treatment using TERMIN-8 technology by creating a continuous and undetectable chemical barrier around the building. The treatment shall comprise drilling holes at the junction of floor and wall, soaking the treated area with approved termiticide, and sealing the holes to prevent termite entry.The treatment shall include drilling holes of 12 mm diameter and 4–6 inches depth at the floor–wall junction at a spacing of 1 to 1½ feet, filling the holes with termiticide solution, and sealing them with chalk powder and white cement, complete in all respects.The treatment shall be carried out intensively for ground floor as well as upper floors, considering that termites enter through the ground and move upward and sideways in search of food. In addition, the treatment shall be extended to woodwork, including spraying inside electric junction boxes and false ceilings, to ensure long-term protection against future termite infestation.The treatment shall be executed using approved chemicals, complete with all materials, labour, tools, equipment, safety measures, and incidentals, as per the directions of the Engineer-in-Charge (EIC) (Analysed rate) |
| 11 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
