|
| 1 | Earth work in excavation in all kinds of soil for structure as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto any lead and dressing of sides and bottom and back filling in trenches with excavated suitable material including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-charge. |
| 2 | Providing and laying 1:6:12(One cement :six sand : twalve graded stone aggregate 40mm (Forty millimetre nominal size) concrete for plain/reinforced concrete in open foundations and curing complete including form work as per drawing and technical specification clauses 802, 803, 1202 and 1203 including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-charge. |
| 3 | Providing and laying in position cement concrete 1:3:6 (one cement : three coarse sand) : six graded stone aggregate 20 mm (twenty millimetre) nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer - in- charge . |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form in suspended floors, roofs, landings, balconies and access platform including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in- charge. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty millimetre) nominal size) as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incedentals. |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incedentals. |
| 7 | Providing and laying four courses water proofing treatment with bitumen felt over roof consisting of 1st and 3rd courses of below or/ and residual bitumen applied hot at 1.45Kg. Per square metre of area for each courses second courses of roofing felt type-3 grade-I (Hessian base self finished bitumen felt) and forth with and final courses of stone grit 6mm and down size or pea sized gravel spread at 6 cum.dm or 0.06 cum) per square metre including preparation of surface excluding grading complete including carriage of materials with in all leads , lifts and other incidentals. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in : Cement mortar 1:6 (one cement : six coarse sand) including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in- charge. |
| 9 | Random rubble masonry in cement mortar for substructure complete as per drawing and technical specification Clause 702, 704, 1202 and 1204 in cement mortar 1:6 (One cement : six sand) including carriage of materials with in all lead, lifts and other incidentals as per direction of Engineer-in-Charge. |
| 10 | Stone soling/boulder filling dry hand packed in under floor as per the directions and satisfactions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. |
| 11 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimetre) thick stone slab over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer-in-charge. |
| 12 | Providing and laying Heavy Duty Cobble Stone 100x100x100 mm (one hundred into one hundred into one hundred millimetre) of approved shade stone laid over 25mm (twenty five millimetre) thick cement mortar bed of 1:4 (one cement : four sand) including pointing as per the directions and satisfactions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. |
| 13 | Providing and fixing 0.60mm (zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. |
| 14 | Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.62mm (zero point six two millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm (six millimetre) dia. & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the directions and satisfactions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. |
| 15 | Providing and fixing valley 90 cm (ninety centimetre) overall 0.62mm (zero point six two millimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating including fixing with self drilling and self tapping fasten of size 5.5 mm ( five point five millimetre) dia. and 55 mm (fifty five millimetre) lap complete with all accesoriees as required including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in- charge. |
| 16 | Steel work welded in built up sections, trusses and framed work including cutting hoisting and fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of materials with in all leads, lifts and other incidentals as per entire satisfaction of Engineer-in-charge. |
| 17 | 15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior/exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including complete as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. |
| 18 | Finishing painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero liltre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five liltre per ten square metre) of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals. |
| 19 | Finishing walls with water proofing cement paint for new work (Two or more coats applied @ 3.84 kg/10 sqm) of required shade including carriage of materials with in all leads, lifts and other incidentals. Please Enable Macros to View BoQ information |
