|
| 1 | Excavation in drains and channel etc in earth work in all kinds of soil such as kankar, moorum shingles conglomerate saturated soil and decomposed soft and hard rock hard rock including including dressing of sides and beds, disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and then returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of Engineer-in-charge. |
| 2 | Excavation in foundation and trenches in all type of soil such as pickwork jumper work blasting soft & hard rock and through conglomeraterock upto all leads & lifts stacking the excavated soil not more than 3mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundations etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth in all leads and lifts & as per directed of the Engineer in-charge. |
| 3 | Laying, jointing, testing and commissioning in trenches galvanised mild steel tube of following dia (light grade) including providing and fixing tube fittings such as reducer increasers, sockets, union, tees, bends etc. where ever required (earth work in trenches to be measured and paid for separately) and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. |
| 4 | 25mm dia (M) Rising main |
| 5 | 32mm dia (L) (24 Rmt for Inlet/ outlet & 220Rmt for Gravity Main) |
| 6 | 50mm dia (Scour Pipe) |
| 7 | Providing and fixing gun metal full way valve of 32mm dia as per direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. |
| 8 | Providing and installation submersible pump confirming to ISS 9034-1976 alongwith directly coupled submersible type squirrel cage electric induction motor suitable for operation on 240 volt 1 phase 50 C.P.S. A.C. supply, water lubricated bearing and provided with pivoted segment type thrust bearing to with stand non vertical lead with minimum wear and tear & dully fitted with device to take upto the expansion of water with heating of motor complete in all respect including entire carriage of material upto all leads and lifts. (Make KSB/ Kirloskar/ BE/ Mather & Platt). (1set of 3HP). |
| 9 | Providing & fixing submersible starter for 3HP motor complete in all respect. |
| 10 | Supply and fixing submersible cable 3x4mm2 to submersible set of suitable make such as L&T/ Havells/ Finolex etc. including entire carriage of material upto all leads & lifts. |
| 11 | Providing and laying cement concrete 1:3:6 (1cement:3approved sand:6app.graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including entire carriage of material upto all leads and lifts. |
| 12 | Providing and laying cement concrete 1:1.5:3 (1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 13 | Wall (any thickness but not less than 0.1m thickness) attached pillasters, buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge.including entire carriage of material upto all leads and lifts. |
| 14 | Foundation and plinth including entire carriage of material upto all leads and lifts. |
| 15 | Providing & laying cement concrete 1:2:4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size and curing omplete excluding cost of form work & reinforcement for RCC work in suspended floors, roofs landings shelve & their supports balconies girders bresumers and cantilevers upto floor two level i/c entire carriage of material upto all leads & lifts. |
| 16 | Providing tor steel reinforcement for RCC work including bending, winding and placing in position complete upto floor two level as per the direction of Engineer-in-chief including entire carriage of material upto all leads and lifts. |
| 17 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring, shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in:- |
| 18 | Vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. |
| 19 | Flat surfaces such as sofits suspended floors roofs, landings and the like floors etc upto 200mm in thickness.and as per the direction of Engineer-in-charge. |
| 20 | Edges of slabs & breaks in floors & walls under 20cm wide. |
| 21 | Providing & fixing man hole cover with frame 500mm dia (medium duty) total weight of frame and cover should not be less than 116 Kg. (weight of frame 58 kg and weight of cover 58 kg). |
| 22 | Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in RS joists, channels angles, tees and as per the direction of Engineer-in-charge including entire carriage of material upto all leads and lifts. Please Enable Macros to View BoQ information |
